Similar Questions

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• Internet high speed decreased after installing Windows 8.1

  Dear guys, I installed Windows 8.1 on my laptop HP Pavilion G6 2241sa.

  Everything is perfect, I downloaded all the drivers, internet works fine BUT I noticed that the speed of my broadband a few minutes down from 80%. My broadband speed is 30meg to bottom/30 megs.

  Download speed is reduced to 2-3megs, but upload speed remains the same...

  My Network (displayed in the Device Manager) card is AR9485 of Qualcom Atheros 802.11b/g/n wifi adapter.

  When I uninstall, Windows automatically detects and installs back. Internet high speed returns to normal, but after a few minutes or maybe 10 12 minutes speed drops back down, until the speed remains unchanged... I removed it 10 times, even tried to reinstall all the ralink drivers for win 8 or Win8.1, but Windows says I have the perfect driver and that it does not install anything else. I removed just in case antivirus, does not work. I checked the speed on the other computer - no problem there, but on my laptop it persists. On Windows 7, I didn't have this problem, it started after Win 8.1.   If you could please help me fix. Thank you very much. Lives

  OK, this is my last post on this topic because I think I solved the problem.

  I thought it was Windows 8.1 to blame, but I finally installed Windows 7. Internet was excellent, but after I installed all the latest drivers of the site Web of AMD (Amd catalyst, video driver, etc.), down speed was limited to 2 to 2.5 Mbps.

  I used the system restore and Internet working again. I decided to check again, and after that I installed again the pile of last softward to Amd, I had problem once again. Prolem is therefore up to the latest version of the AMD software. Do not know exacctly what part, perhaps things like AMD stream or similar. I also believe that this issue includes my modem that does not like to communicate with my computer that has these last things AMD.

  Anyway, thanks for reading. My internet gives me full speed and I am happy with that. I just create a system restore point before updating to new drivers from the site Web of AMD. It's easy to go back. A big thanks to everyone! Lives

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Unable to connect to the Internet after installing Windows 7 Ultimate

  Hi, I installed a new Solid State Drive and with it, a new copy of Windows 7 Ultimate.
  
  The original HP Pavilion Slimline s5-1114 supplied with Windows 7 Premium. After installation, I was able to install these drivers HP:
  
  57372 - management Engine Interface

  57417 original Driver Chipset

  58919 HP Support Assistant

  65305 - Diagnostic hardware PC

  However, the computer gave me an error for these drivers, claiming that my system did not meet the minimum requirements:
  
  57359 - network controller

  58084 - wireless Controller

  59644 USB Controller

  57493-

  57506-

  57362-

  Any suggestions on getting this computer connected to the internet? Right now I am trying to connect via a cat5 cable, and then once it's upward and running, maybe a wi - fi connection. One step at a time...

  You are the very welcome.

  OK, if your model is not a wireless card.

  Need you these two devices what to consider?

  These drivers should work...

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-97536-1&cc=us&DLC=en&LC=en&OS=4063&product=5157057&sw_lang=

  PCI Simple Comms:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-105636-1&cc=us&DLC=en&LC=en&OS=4063&product=5265252&sw_lang=

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• No Internet after installing Windows updates

  Original title: can not access the Internet using the Chrome or Explorer once I have download & install the latest critical updates for Windows

  I have Windows 8 on my laptop.  I tried twice to leave my automatic updates (critical) download & install - once at the end of October and the second time a couple of days.  Once the download is finished and I have install (including my computer restarts), everything seems fine - but I can't access the internet with Internet Explorer or Chrome (which I prefer).  I had to run every time the system restore in order to retrieve my access.  Any ideas for why I can't update?

  Hi Patty,.

  Thanks for your reply.

  I appreciate your efforts to try the methods provided.

  I suggest you to update the network adapter and the drivers from the Chipset and try to install the updates of Windows and check if the problem persists. If the problem persists then try to run the troubleshooters.

  See the link below to install the drivers: (make sure you install the drivers for your computer model, such as the model number, you have provided is not specific, because there are several models under laptop HP Pavilion G6)

  http://h22207.www2.HP.com/us-en

  Hope this will solve the problem, if not let us know with the updated status and we will be happy to help you further.

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot access internet after installing the latest Windows Update

  * Original title: Question access to the internet after you have installed the latest update

  Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

  I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

  I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

  Can you please tell how can I install the update it will affect my ability to access the internet?

  Hi Victoria,.

  Please help me with the following suggestions:

  1. using modern Internet Explorer user interface or Desktop Internet Explorer?
  2. your computer is in a cable or wireless internet connection?

  3. What is the number of the kb article that is causing the problem with the internet after installing the update?

  4. are you referring to Windows Update (KB2919355) 8.1?

  Windows Update: Frequently asked Questions see (how know what are updates
  been installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Click on the link below to troubleshoot if the internet explore does not work:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

  I hope this helps. Answer please if you have any additional questions with Windows.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• No internet after installing xp sp3

  Original title: I installed XP SP3 and it seems to have erased all my network connections. Now will not set up new so I have no internet access... Any ideas?
  Had a recurring problem with the crash of the PC. This was resolved after I installed SP3, but the installation seems to have wiped my network connections. If I run the wizards to build their new it simply refuses to do so. I tried to reinstall my router, but that did no good.

  Help!

  Hello

  You receive an error message on the computer?

   
  Method 1:
  You can solve the problem of connection by following the steps in the link provided.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  You can try the steps listed in the links and check if it helps:
  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show that all devices and network connections may not display network connections after installing Windows XP Service Pack 3 (SP3)
  http://support.Microsoft.com/kb/953979
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756 )
  How to back up and restore the registry in Windows.
  
  Method 3:
  You can also check out the link to see how to install Windows XP Service Pack 3
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• HP pavilion zv5000: missing zv5000 system drivers of base after installing windows 7

  After installing windows 7 displays device management point exclaimation

  Hardware ID:

  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01
  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C
  PCI\VEN_104C & DEV_8201 & CC_088000
  PCI\VEN_104C & DEV_8201 & CC_0880

  Also CD-ROM/DVD-rom won't recognize my cd/DVD, but Device Manager shows the work of the unit.

  Need help

  Hello:

  You can use the driver card reader XP support for your laptop and driver page.

  There is no vista or W7 driver for this card reader.

  If auto installation does not work, manually install the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 385148 & sw_lang =

• Computer OS used to start after installing windows 10

  Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?

  What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB.  With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version.  Once clicked, it will ask you if you want a DVD or USB for the iso.

  Once it's done and you have the DVD or the USB version, see if you can install Windows 10.  If this fails, you may need to replace the hard drive.