Experience with the Canon 17-120mm lens?

Similar Questions

• The image quality with the Canon 5Dmark 2 vs... The 5Dmark3?

  I use Leica lenses on a canon with an adapter body.  Is the image quality with the Canon 5Dmark 2 vs.the 5Dmark3 similar?  A reason to get one against the other?  I like the idea that I can change the viewfinder on the Mk 2 screens. Any overwhelming improvement in the 5Dmark 3 that would justify the review?  Thanks to those who have used the two boxes.

  The main advantage of a Mk3 on the Mk2 is the AF.  Most points and it can focus with f/8.   If your Leica lens is manual focus, then you would not care to this topic.  3 5 has a bit of an advantage in the ISO but not a huge factor.  Another one, I'd say that IQ is the same.

• Experience with the service coverage in Bulgaria

  Hello

  I am one of the sysadmins of a large international company, which has offices in Sofia. Bulgaria.
  I would like to share my experience with the Toshiba products and service coverage in Bulgaria.

  Months ago, we bought an external USB hard drive - STORE. E PARTNER 2.5 500 GB USB 3.0 P/N PA427E-1HE0. After you have deployed the HARD drive, I noticed that the computer constantly loses / restores the connection to the external drive.

  As I have suggested that the cable is not inserted properly, I just pulled the cable to the USB connector to check that it fits fully into the socket. To my surprise the just USB connector broke and fell inside the HARD drive chassis. In my opinion, this is a factory default, a badly welded connector.

  We talked to the service allowed in Bulgaria: STEMO and they sent the disc with a protocol that it is a physical damage that violates the terms of warranty service.
  I can't imagine a way to prove in this case that we have not jumped on this HARD drive and that's the way it came from the box... We went to buy Hitachi after this case, and I can say that we had not a single complaint of users or technical staff.

  I would like to say that it was really a bad surprise for me that a multinational company could offer this customer service the poor in Bulgaria, especially given a STEMO dealer who are so famous here for their complete lack of quality of service and poor standards.

  This will avoid for sure choose me no matter what other Toshiba products in the future.
  Thank you.

  Sorry to hear about this. It is very unfortunate to have such an experience with the authorized service provider but I n t think that such a negative experience such influence negative on you.
  One issue doesn't mean Toshiba products are bad.

  You know very well that Toshiba is one of the largest companies for HER and material production in general. A few production errors can happen to anyone.

  Problem is that many people don t care much material and very often some hardware components can be damaged very easily. Can you imagine how much money Toshiba or any other hardware manufacturer will fix these issues where everybody says it's lack of production?

  On a path, I can understand you, but otherwise I can understand Toshiba to be skeptical about these mechanical defects. You as an expert in computer SCIENCE know these issues. Can you imagine how you will react when you give your new notebook your co-worker and a few weeks later it brings you with broken keyboard? I don t think you will accept his argument on construction of bad keyboard.

  You know that's not easy to discuss these issues.
  In any case, thank you for your ad. This forum is the right place where people can exchange experiences and opinions.

  Good luck

• I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

  I have a problem with the canon 5dsr with Lightroom 6 connection

  I can't drop images directly in Lightroom

  The camera connected only by EOS utility

  Help, please

  Hi mateuszm,

  You cannot drop images directly in Lightroom.

  You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

• Someone at - it experience with the Sony HXR NX5u (or p)

  Hi all

  Was wondering if anyone had any experience with the Sony HXR NX5u or P?

  We'll get a little time, and it would be good to know how the workflow was. We "re on CS5 on a new system, built for speed and seems to treat the other cameras without problems AVCHD video.

  As it is AVCHD, I guess that timecode number was not "fixed" again, but it would be good to know if it there first with this camera-specific features.

  Any info appreciated

  Thank you

  As it is AVCHD, I guess that timecode number was not "fixed" again, but it would be good to know if it there first with this camera-specific features.

  Not necessarily; read here. Looks like you're good if you follow the rules

• My disappointing experiences with the iPhone 6

  After 11 months of owning an iPhone of 128GB 6 + the screen started to flicker, a gray bar would flash at the top of the screen and the touch screen has been insensitive.  This was due at random intervals.  I restarted the phone and the problem persisted.  I backed up my data and reset the phone like new.   The problem persisted.  I had my first appointment at the Genius Bar. He went a lot; I was leaving in 15 minutes with a new phone (my first replacement).

  I came home and restored my backup, and after a day, the problem came immediately.  Again, I have reset the phone again, and the problem persisted.  I did another (second) meeting with the Genius Bar (four days after the first).  My genius was excellent.  He had seen that problem before; He showed me that if he put a little pressure on the phone, the screen will become sensitive while he kept up the pressure. He took the phone and showed some of the other Geniuse the problem and how do I get the screen to become sensitive.  He assured so was completely related material and I was just out of luck and that it had nothing to do with my backup.  He asked me to contact Apple, since it is a problem he could see quite often with these phones.  In the end, I got another new phone (my second replacement).

  Once I got home I restored my backup once more.  And yet once again, the problem came back.  At this point, I was getting angry.  I have two young children (under 3) to home and make those appointments around their program is difficult.  Back to the apple store! This time, it was a little harder to get a solution. Engineering had to obtain the approval of the Manager and then he could not find the replacement phones and all the experience took a lot more time then my two previous trips.  In the end, I got another new phone (my third replacement).

  Yet once, I asked if this might be the result of my backup, and even once, I was told no.  I expressed that it becomes ridiculous and controlling common only I see is the backup. He suggested trying the phone for a few weeks without food and restaurant then. I never restored and just started over again.  The phone has been flawless until today, it lasted 38 days.

  The problem came out of the blue.  I have not installed anything new, nothing extraordinary happens today.  The screen started to Flash, returned the gray bar, and the screen becomes unresponsive.  The first Genius Bar appointment I can do is in 2 days.

  In short, in the space of 10 days, I've had four different iPhone + 6s fail in exactly the same way.  My family uses exclusively apple devices.  I had an iPhone 3s, 4S and now 6 +.  My wife had iPhone 3, 5 and 6.  We have all two Ipads and I an Apple Watch for Christmas.  We have had excellent experience with our devices.  I am more unhappy with the iPhone + 6s.  I have about a year left before I can go again, so I'm stuck with what is becoming a useless device.

  I have seen others with the same issues, but no solution is permanent.  This issue should be fixed.  I'm afraid that my next replacement will last 90 days and then I will be paying $329 for a replacement which is likely to fail again.

  What is your technical support question that we, your fellow users can answer?

• My disappointing experience with the Lenovo Ideapad A1 Tablet

  As a student who lives on a scholarship that I had saved for months to buy a Lenovo ideapad A1 compressed. After seeing it shipped to the United States, I felt satisfied with his system Android and several features it offered. I felt happy with it, up to 3 months after the purchase. I turned it on a morning expect to read the daily news and I noticed 2 lines horizontal purple color and a line horizontal color cyan who were stuck in the screen all the time. Logically, what I've done is to call Lenovo support, since I bought it only very recently. To my surprise, I was told that the Lenovo A1 tablet doesn't come with any kind of guarantee on the screen at all. And even more frustrating to know that the replacement of this screen is from $ 200 to $ 300 . It's still more expensive than buying another Tablet! How this is possible when the LCD screens are one of the products that have more problems in the manufacturing process?

  Thank you. I sent my tablet to fix (it has not even turn on a couple of days) I am now waiting for them. I had good experiences with service of lenovo Centre before, I hope they can fix

• Problem with the Canon LBP 1120 printer installation driver

  Hello

  I have a machine running 64-bit vista Home premium. and I have a Canon LBP-1120 printer. This printer is in good shape and I don't want to buy another printer.
  But the problem is that the only driver that there is, is for Vista 32 bit. And when I try to install, I get the error message saying that I need 64-bit drivers.
  I'll be happy even with basic print function because I do not do more printing.
  Looked everywhere on the web... good .no
  A workaround solution would help me a LOT!
   
  I found this, but the link does not work
  [Quote]
  Hello

  There should be a Vista driver for it that will at least at the base
  print function, although it does support all of the features:
  https://winqual.Microsoft.com/hcl/PR...P-1120&OID=191

  [/ Quote]
  Hello
   
  1. are you able to print successfully?

  3. What were the recent hardware changes performed on the computer before the question software ro?
   
  A Windows Vista 64 Bit operating system is compatible in installation of 32-bit drivers. All the 64-bit version operating systems have the ability to run 32-bit applications, but on a version 32-bit operating system, you are limited to only 32-bit software.
   
  According to the information on the website of Canon, Canon provides only the 32-bit drivers for Canon LBP 1120 printer, 64-bit drivers are always expected. To improve assistance to the topic to download driver 64 bit I ask you to contact Canon.
   
  http://www.USA.Canon.com/Cusa/support
   
  Canon LBP 1120 32 Bit drivers
  
  http://software.Canon-Europe.com/products/0000524.asp
   
  For problems with the installation of the printer drivers 32-bit in a 64-bit Vista system, you can go through the resources in the following article and see if it helps:
   
  Error message when you try to add a printer driver 32-bit on a 64-bit print server: "the folder you specified contains a compatible software driver for your device.

  http://support.Microsoft.com/kb/979385

  Please see the link for more information about the issue mentioned.

  Installing the driver for 32-bit and 64-bit platforms

  
  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/gg463027.aspx
  

  
  

  I hope this helps.

• Unable to capture video with the Canon Vixia HV40 HDV - why?

  I am unable to capture video HDV via Firewire to my Cannon Vixia HV40. I am running Windows 7 Professional 64 bit on a computer HP DV6T Quad Edition laptop, using the native Firewire interface. I can capture DV standard definition without problem (when the unit is set to DV mode, Windows detects the device and the guests of action - if you select HDV mode, Windows does not, and the camera does not appear in Device Manager).

  So far, I tried to capture HDV in Sony Vegas, Windows Live Movie Maker, Cyberlink PowerDirector 7 and finally HDVSplit (considered as the common denominator of simpler, the lowest for the capture) without success. NOTE: the camera IS recognized in HDV mode. In all the above applications, I can go back, play and fast forward - there's a link that works at least at this level. When I try to capture HDV, I get different results - no success. HDVSplit starts playback on the camera and stops after 3-4 seconds, indicating that no data has been transferred from the camera. If I turn off scene detection, capture runs indefinitely, but the generated file is never more than 0KB. Director of Windows also appears to capture, but the file is still 70 KB and is not valid. Sony Vegas, same, begins the capture but never see any video. CyberLink Power Director, somehow, HDV recorded once a band - and can always record a live camera HD stream.

  I tried a lot of things:

  1 using the older driver 1394
  2 turn HD/HDV
  3 reinstall the capture software
  4 press the 'PLAY' button first, then enable "record", then the workflow is running.
  5. install the Canon software (despite the fact that it contains all drivers for camcorders) - in fact there is no driver for the Canon Vixia HV40. It is supposed to work with the Windows 7 driver. I tried both (W7 and legacy) with the same result.

  The Canon Vixia HV40 is documented as supported in Windows 7 by Microsoft and Canon - and yet there are many people on the Internet claiming to have this problem (although some people report no problems at all). I am sure that I do not see a 'Pink Elephant'. As this is a forum for Microsoft - I would be happy if I could capture in Windows Live Movie Maker - to keep the inconsistencies of the third part of the road. What should I try next? Is there a 1394 a generic driver that is certified to run on Windows 7?

  I went and hooked the camcorder new just to make sure that I can hardly believe it is now capture HDV. Perfect work. Believe me, I've tried evey solution I could find on the internet and it is the only one that worked for me. I found the solution on this forum and started to find only no sooner. I've only used it with Pinnacle Studio 12 so far... never mind, I just tried HDV Split and it works too. I had also planned to buy a SIIG NN-EC2812-S2 and if it had been less expensive, I did not hesitate. I tried from Best Buy's Dynex Express card, but he had the camera recognition problems and sent. I thought that you get what you pay and was actually looking for the best price on the SIIG when I came across the solution. I wish you good luck.

• Experience with the connectivity of the laptop

  Hello

  someone that also has experience with a laptop at CTS-3000 or CTS-1300-65 of sharing data connection?

  With my (and my colleagues) HP or Dell laptop business, we need to make the switch to the external VGA twice to get the correct resolution of 1028 x 768. I ask all the other external projectors etc. because it works well.

  So what are your experiences? On my site to view it looks like a small problem with the systems of TP - perhaps.

  Thank you

  Tino

  I will suggest you to open a TAC case with us so that we can confirm that your Codec level and mobile chipset are affected by this problem that I mentioned before.

  Thank you

• With the Canon cameras and embedded image C40

  Hi all

  I got a Cisco C40. We have two cameras Canon XA25 already in place (for a different application).

  Ideally, we would use the guns. Separate us and stream video to the guns to goto C40. Can we push the two cameras of the whole (at the other end)? So that the main camera to feed with a secondary camera to power on this subject?

  Faraz.

  As Patrick said, the C40 does not support showing two cameras at the same time.  The functionality of "Composer" who can do is available on larger end C60, C90 or SX80 points, but not the baby end points.  The provisions on greater endpoints and can be manipulated with the software to the Console of TC .

  But, for your solution, you can feed two outdoor cameras on an external device of picture-in-picture, then just feed one "camera" food to the endpoint.  We do this for many years with various devices in a number of our rooms and on several mobile camera VC carts, back in the old days with old devices analog 4:3 (Kramer PIP-200XL) and, more recently, with lots of cameras HD and PiP (Extron DVS 605).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Tetherred shooting with the Canon EOS 5 d or 6 d in creative cloud

  In fact, I have two questions in one. First of all, I own a 5 d, first model (called 5 d mark I by some), and it seems to be supported in Lightroom for shooting as indicated herein captive:a list of cameras that can be attached to Lightroom.

  But when I turn on my 5 d and begin shooting tethered in Lightroom CC, the display alternates between showing a message that my camera is detected or there is no camera detected. At the same time, my camera says 'busy' all the time.

  So it seems that 5 d is not supported after all (I tried to change the setting of PC Connect on the menu, but which does not work either). This is why it is supported by CC or not?

  Then, I thought to buy a 6 d, since it's a newer model, but this model works in tethered shooting in Lightroom CC?

  Confusion in abundance... any of you have an answer, that will help me out this dark maze ?

  I guess you look at this documentation from Adobe.

  A list of cameras that can be attached to Lightroom.

  I also have a 5Dclassic.   Even if shows that the 5 d classic is supported for Lr 3.0 as the camera is not attached with Lr 6 because of the Canon SDK.  This documentation page to view a LOT more information about the time in favour of home fell for a camera, but they pulled this info so that the page is now UNNECESSARY.

  The 6 d is listed as supported in Lr6

• Last LR update multiple problems with the Canon CR2 files

  Hi team

  I need to let you know about a problem of GUI which is performing production and publishing workflows using LR after the last update of the main users.

  First LR kept crashing with Nikon nef import, it was more come with updated check & update, however the files seem to be flaky, sometimes more than 5 minutes to make the 1 / 1 or 100%, that using a MacBook Pro with the Retina display that normally does in less than a second because of the acceleration of the graphics card shows me that there must be a bug.

  You can check your code against the latest OS from Apple, as it has also been updated last week, I noticed that the preview opening on RAW with the Apple OS is slower, so it could be Apple, if you use their codecs.

  Second, I use both Nikon, Canon and Fuji Photo in RAW, The Cannon is having major issues that basically stop me to be able to make adjustments, incorrect proportions basically each function seems to pile up and stoppage of work of LR, I optimized and revived, all work on the other PC files that haven't been updated. I also noticed that when I select 6 or 8 to indicate color flags keeps the last notification of action on the screen.

  Can analyze you.

  Camera model: EOS 7 d CR2

  An example of this is that if I select the GREEN labels bar image does not reduce to show only the GREENS.

  

  Hi team

  Another updated. I solved my LR 15.2.1 problems and seems to work fine now.

  Advice for anyone with GUI main questions LR 15.2.1 running on Apple MacBook Pro retina edition 2013 with Apple El Capitan in what concerns the CR2 files. The symptoms started after the upgrade of 15.2 CC.

  OS X Symptoms: Finder related - if you have slow full resolution display in the finder, it is to say select a RAW (not jpeg) image & press SPACEBAR to preview image, if the image is about 15 to 25 MB & if it takes more than 20-30 seconds to load the full resolution with excellent clarity or you get the Gables of rendering then it's maybe that your library caches are chocked.

  Symptoms of Adobe LR: LR 15.2.1 - GUI does not, collage, inadmissible on files CR2 once the file cache has been read or changes.

  Depending on how clean your machine is ie Contact AppleCare to help you to clear the data in System & User Library Cache, then perform a HDD of first aid with OS X Utilities.

  Restart your computer, and then try again, the Finder preview my now taken 10-15 seconds to make it complete, which is normal for such a large file. Also somehow clean the cache has significantly improved the LR15.2.1 as well.

  Regarding LR 15.2.1 CR2 files read better again, and I can see updates in near real-time. Watch also the son for GPU issues performance as well, as I mine off, restarted LR & closed completely to the bottom of the laptop and rebooted again allowing the GPU box and who can to help also.

  As a result of slower Finder preview rendering, to solve this problem, I can re - install El Capitan to still solve my problems if I want, however I decided of don't not at this point, simply because of the risk & maybe needing a full hard reinstall, which mean the loss of data, and I don't want that, without making a backup first. I am happy to continue to work as it is until I had time to backup and make the full re-install, what I'll do in my local AppleStore...

  Sorry not clearly answer my own resolution or steps to follow, but one or more of them have seriously helped me today... so I hope this helps others too facing the same or similar issue

• (Redirected) My experience with the Service the customer of Dell and Dell has been and is still awful

  The Dell customer service is by far the worst service I've ever had to deal with dissatisfaction. After two weeks of owning my computer desk dell, the hard drive failed, when I talked to technicians from that day, that I wasn't even upset considering I was under warranty and I knew that my computer would be fixed for free. I was told that a tech would quote me the next day to put up once for what it Vienna repair the computer. Surprisingly enough has actually happened, only when he called me he was somewhere in Arizona and I live in New-Mexico. After having missed all my college classes and have to reconsider work waiting for technology to arrive, only to be told that my address has been updated completely wrong. After 4 hours on the phone with the Manager after Manager, I was finally told that I have would be by corporate overnight to express my disapproval of their customer service.  Of course but one of the managers that I had spoken previously tried to contact me when I had specific said that I would be unavailable. But the call, which was supposed to come from the company has never even updated in my case, I discovered later when I called. After an hour on the phone with dell today absolutely nothing had been done to solve any kind of error on their part Ive heard I'm sorry for that, so many times of technicians that it is hard-wired into my brain at this point. But I don't want to hear someone halfway across the world tell me sorry and then take little action to solve the problem. If I could have my way, I would like to receive a full refund and buy a different brand outside of dell. If away from my experience with their products, I am not too impressed (given my hard drive couldn't do more than a month of use). When it comes to their "customer service", I have absolutely no faith that if ever they will do what they should do to not to lose a customer. If you are considering buying one of their products I can't EMPHASIZE enough that you will regret when it malfunctions. All I really wanted them to understand was that they made a mistake with my address, which should have been corrected with a work around my schedule to have my computer fixed. But also the fact that every single representative I talked to just kept sending me in a circle, saying: oh you need to contact someone else, we have to call them you or there is nothing we can do. So, I say with certainty of one hundred percent that dell customer service is the worst I have ever encountered. I'm sure that nine times out of ten these issues won't happen, but he did it for me and none of the programs of care for the customer to dell had nothing to say that it was to the advantage of clients after continuous errors on their part.  A less costumer in the long term of dell.

  Better to post this thread in the Customer Care Forum here:

  http://en.community.Dell.com/support-forums/customercare/f/4674.aspx

  Bev.

• Canon PIXMA MX922 User Guide: printing on a blank disc with the Canon PIXMA MX922 all-in-One

  Please ignore my previous post, which should be sent on the Canon Support Forum.  Sorry for the confusion.

  Uh, just to let you know this isn't the Forum HP printer, Canon.  For questions, contact the good folks at Canon.