Explore 9 and Windows Mail - Windows Mail emails will not print after installing Internet Explorer 9

Similar Questions

• Brother HL-2240 printer will not print after installing Windows.

  original title: MS upgrade on Windows XP

  Help, please.  I installed the recent update of MS for XP and now brother HL-2240 printer will not print.

  KB982670 seems to have something to do with .NET Framework 4 Client Profile.  This update or Windows PowerShell have been updated "critical", then maybe you didn't need to get.  However, it's water under the bridge now.

  When you open the print queue, are shown print jobs as stuck there?  Just to make sure that the queue is cleaned, do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type each of the following commands in the command prompt window and press ENTER after each line

  • net stop spooler
  • del "% windir%\system32\spool\PRINTERS\*.*" {answer Y when prompted}
  • net start spooler
  • output

  It's really only a shot in the water, but he could help and can not hurt to completely uninstall and reinstall the printer.  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  Get the complete installation package here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/004500/dlf004515.html?reg=us&c=us&lang=en&prod=hl2240_us_eu&type2=1&os=7&flang=4&dlid=dlf004515

• Reference Dell 926 printer will not print after installing Windows 7

  After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?

  Greg,

  I think that we all regret our first wedding, well most of us.

  Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  Rick

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• HP3050a - will not print on the Internet Explore or any email is web-based.

  Here's the thing! My 3050 has is set up for the wireless. works great for any microsoft office program. Impressions like a dream. Works on all software for Iphone and Ipad. Wireless analysis. All fab. BUT it will not print through messaging on the computer web-based.

  It is now a network computer - one that is. I have a PC that has a HP1050 via USB which works a treat in all programs.

  I've updated the last IE web browser a few weeks ago, everything seemed fine then, but last week arrested two printers scan (rather the sweep feature missing from the pc). Charge both pilots as of the 1050's worked almost immediately. The 3050 took some back reset on the wireless - had evntually but every time now trying to print through the web-based e-mail I get a pop up that States:

  Error running scripts

  line 2072

  invalid error or agruement procedure call

  Code 0

  URL: res:/IEframe.dll/preview.js

  Regardless, if you choose to continue or cancell, that nothing happens - rebooted, reloaded, etc etc, but can't get the blooming thing to print from web-based e-mail. It used to work very happily but now... Help me please get really rather jolly cross!

  I bet that this is due to a conflict between IE 9 and your printer driver. The only real solutions must use another browser, or use a different print driver. I'll link the steps to assign another driver print below in case this is the solution you want to go with. I hope this helps.

  How to assign other drivers to print in different Versions of Windows

• printer Laserjet 1020 upgraded to windows 8.1 will not print PC HP Envy H8-1503

  Hello

  was wondering if anyone has problems printing of victory 8.1, used doctor HP printing and scanning and said everything's fine but a test page does not print as I can't print anything from another category windows 8.1. using windows 8 that I had no problem printing, I've updated all the drivers

  Also when I connect my laptop using windows 7 it prints, and with them turn off the printer laserjet 1020, then plug in the USB cable and windows 8.1 it will be printed.

  But when I turn off the 1020 laser jet, then turn it back on then try to print windows 8.1 that it will NOT print

  Thanks Mike

  Hello

  I understand that you can not print with Win 8.1.

  Drivers for win 8 and 8.1 Win are the two Version 9.
  Make sure that you uninstall the previous printer software.

  Here is a url to completely uninstall a printer in Win8.
  http://www.YouTube.com/watch?v=-M0GVVcwT-o

  Restart the computer.

  Reinstall the software of the printer again. Select full features software driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=439320#N173

  If you need more simply make assistance let me know.

• CD/dvd drive and windows update/installer will not work

  Because I'm not on the computer, I am referring to I should be as concise and precise as possible here. The system is Windows Vista service pack 2.

  I'm trying to re format the computer of a friend. Something I've done often in the past. I did two recovery disks when the computer was new, but cannot do recognize the cd/dvd or any other, internal or external drive that I tried. error code 39 is cited in all cases.

  In addition, he said there are three updates to install when I boot on the system to start before these updates are installed only. In fact the windows installer has stopped working. I went into Device Manager and not only it shows conflicts for hard drives, but for multiple NICs also: twelve 6-4 adapters and five ISATAP adapters also Microsoft. I've uninstalled and restarted for all adapters reinstall with the same conflicts. In addition the machine will not be closed correctly in normal mode and I get a blue screen with a message of memory dump. I'm afraid to format the c drive, until I have a way to reinstall the system via a disk drive. Can someone help me please?

  I tried it in safe mode and it stops at least normally but as soon as I restart with networking all the problems are back.

  Hello

  I also suggest you go through the steps in the article and check if that helps.

  Hope that the information was helpful and let us know if you need more assistance. We will be happy to help you.

• Unable to sync music using Windows Media Center and Windows Media Player will not open

  Media Center will not sync music!

  I recently opened Media Center and I had no music in the library. I have constantly played music from the library so I didn't know what is happening. When I try installing the library again once it tells me that a necessary component for Windows Media Center is not available. I have not changed or downloaded something different. I went to check if Windows media Player is the multimedia file sharing. The message I get from that is, basically, that something is missing.  Now my Windows Media Player is not even opened. I wonder if my Zune Player (80 GB) has nothing to do with the problem. I charge my player when this has happened, but I do this all the time so I am at a loss. I went to the page "problem reports and Solution." It is the symbol of the Media Center window and says that the problem is caused by Windows. The solution is to update to windows; which I am fully updated. I tried to restore the system to an earlier date, but that doesn't work anymore. I'm at a loss to know what being of any help would be appreciated.

  As a side note video playback, TV and photos also works very well in Media Center.

  Thank you

  Shay

  Thank you, Shay

  Hi Shay,

  You can try the following steps and check the result:

  Step 1: Run the sfc scan to repair system files missing and corrupt.

  a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information, visit this link:http://support.microsoft.com/kb/929833

  If the problem persists, try the reconstruction of the library:

  Step 2: Library rebuild Windows media player.

  This problem can also occur if the library is corrupted. Rebuild the library and check if this solves the problem.

  Follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  You can also view the following green button and check if it helps:

  http://thegreenbutton.com/forums/t/38766.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PC and Windows settings store will not open in windows 8 after refreshing (safe mode, boot clean and sfc/scannow do not work for this)

  Don't forget to support this issue to get a faster response! : D

  A few weeks ago, I was using my computer and it worked very well. Once I got home I turned it on, but it does not turn. After trying several times and get only a black screen I finally got an answer, my computer was looking for solutions, and finally I decided to update it. Once I did, everything seemed to work, but as he was warned many of my apps have been removed. Once I tried to download office, a message appeared and the dignosi said that "a problem is preventing the troubleshooting tool to start. After this, I restarted my PC, but the problem persisted. Then I tried to open the app store and it did not open at all it just poped to the top of the icon of gree. With this problem and no solution, I scanned my computer but nothing. Then I looked on the internet, it seemed to me that many had my problem. Then I tried what more said and noticed that something that I could not even do is run at the prompt as an administrator. It took a lot of my possibilities, and the problem of not being able to download anything at all do not let me even try firefox or install any kind of service. To resolve this problem, I have internet and with the help of my brother, I could do my account manager and perform the sfc can. After that he told me that I had nothing wrong. The next thing I did was try to run "chkdsk/r", after that I could download and install things over the internet so I did a update and installed everything I could. The only problem was that the store and the laptop settings cannot yet open and I tried every utility in the internet troubleshooting and recommendations, but nothing works, I can't even change my background of my photos folder. Please help: c

  Hi Francisco,.

  You can check this link for now.

  WIN8: App: modern: Apps do not start if the default registry permissions or the modified file:
  http://support.Microsoft.com/kb/2798317/en-us

  Please return to the State of the question.

• Windows Photo Viewer does not properly after installing Spyder 4 Express

  I installed Spyder 4 Express.    Open photoshop and got message this - original use - incorrect color profile so used original and all the images look OK.   But the photos opened through Explorer files (correct thumbnails), but when I preview with Windows Photo Viewer, the images are all very tinted orange.    I then removed Spyder 4 Express hoping to remove the colour profile info, no luck.   All other photo in other software and wallpaper moniter views are correct.   What should I do to correct the display color in the Windows Photo Viewer.

  Hello

  Thanks for posting your concern on the forum.

  According to the description of the question when you preview with Windows photos Photo Viewer are all very tinted orange. Maybe this is a chance that display drivers are getting corrupted or need to be updated.

  As you are referring to the Windows Photo Viewer, I suggest you to check the Windows Photo Viewer is defined as program default for Open the images. You can follow the steps mentioned below to check that.

  1. Press on the the window key + W.

  2. In Search box type in default programs , and then press enter.

  3. Click on Sand your default program.

  4. Now right-click on the Windows Photo Viewer, and then select set this program as default.

  For more details, you can refer to the following Microsoft article mentioned.

  Choose the apps Windows uses by default

  If the problem persists, try to update the drivers and install Windows updates. Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  Download and install the drivers

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows 8 will not start after installing Windows 8.1

  I have laptop with Windows 8 on the drive (C :), I installed windows 8.1 on drive (d). When I want to choose Windows 8, it didn't start!

  There just restart and ask me to choose again.

  I tried "automatic startup repair" with the DVD but it did not work, I tried this command also:

  Bootrec /FixMbr

  bbootrec /fixboot

  bootrec /rebuildbcd

  Hi Michael,

  I would be grateful if you could help me with more information.

  1. What is the error message accurate/complete that you receive when you try to start Windows 8?
  2. Are you able to boot to Windows 8.1 without any problem?

  This problem can occur because of bad sectors on the hard disk. I suggest you run the disk check and check if you can start Windows 8.

  1. Press the Windows key + X, click on (Admin) command prompt.
  2. At the command prompt, type chkdsk /f and then press ENTER.
  3. Now, type chkdsk/r to repair.

  To run the check disk on C drive, try the following steps:

  1. Press the Windows key + E to open Windows Explorer.
  2. Click the drive you want to check (C :).
  3. Click Properties andcclick on the Tools tab.
  4. Click the control button user error checking.
  5. Follow the on-screen instructions.

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• HP Deskjet 1000 printer, model: J110a printer will not print after loading Windows 10

  After loading Windows 10 would not print my printer. I deleted the printer and HP all downloads for it and turn the computer off. Start the computer up, re-load the printer driver, plugged and tried a test page. I get a message in the lower right of the screen that says "file saved in the documents folder" and no page is printed.  I tried troubleshooting, but without success.

  Hey @Bandit64,

  Issue seems to be with the spooler, try the steps below and mark the port selected in the printer driver settings.

  If you use USB - selected port must be USB001 or DOT4

  If you use a network cable - selected port must be HP TCP/IP Standard.

  1. stop the spooler
  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right-click on print spooler and stop it.

  2 remove the files of spooling.
  a. click on my computer.
  b. go to C:\WINDOWS\system32\spool\PRINTERS\.
  c. remove all files in this folder.

  NOTE: If the spooler does not work properly, this folder must be empty when the machine is not printing. Normally, it removes these files in this folder after that they were sent to the printer. Delete blocked files can free the spooler and allow it to continue normal operation.

  3. restart the spooler.

  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right click on print and start spooler.

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive