Explorer displays unknown USB on the network in the Explorer tab - but no USB in the computer

Similar Questions

• Does not display memory installed on the computer on Windows XP.

  Original title: RAM upgrade

  Hi again! I have another problem now. My computer is a netbook, EeePC1000, with 1.6 Ghz, 1 GB RAM and 160 GB hard. OS: Windows XP Home Edition. I tried the upgrade to you with a new memory KINGMAX-DDR2-PC5300-667 RAM. The problem is, my OS to recognize only 0.99 GB of the 2. What can I do? It's just a setting problem or other? Please help me! Thank you!

  Hello

  Your English is better than a lot of people I know and I'm English by English nationality!

  OK, from your description of the memory, it seems to be the correct sorting. I'm skeptical that a BIOS upgrade will help (I looked in the notes to upgrade the BIOS on the ASUS website), so let's check a few things before you consider as an option.

  First of all, what you do makes you think that Windows can see 1 GB? If this isn't it (or its equivalent)...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the computer: section

  .. .so please do the above and respond with the details.

  You say it's an EeePC1000 but is there something that comes after the 1000, for example H, HA, HD, HE or HG?

  Are you sure that the memory module you have purchased is actaully a module 2 GB instead of 1 GB module? Have you seen the actual label on the module (as opposed to its packaging)?

  When you start the PC, before Windows XP starts to load, you see anything by telling you how much memory is installed? It can not be displayed or may be displayed briefly, not blinking! If you do not see this indication can you enter the BIOS Setup and check from there? Unfortunately, the Asus site gives a manual with no information on the use of the BIOS. You need to look for a message from depression F key at boot time (usually F2 or Del but I saw others also). When you press this button, you should get in the pages of the BIOS settings. Look for the amount of memory installed. Exit BIOS without saving the changes, just in case you accidentally change a setting.

  Tricky

• Icons displayed incorrectly at startup, the computer is unusable for several minutes

  My computer is less than a year, I'm running Windows 7 Professional, and for several weeks my computer acted strangely. When I turn on the screen displays properly, however some or all (it seems to change every time) of my icons appear as these things white paper folded. It continues for several minutes during which I can't run any programs, but I can use my mouse pointer and the loading symbol when I move the taskbar. After a 5-10 minutes (I've not timed, but it might be compatible), the icons to revert to the normal and my computer seems to work perfectly well. Any idea what the problem might be?

  When a Windows computer starts in place, some of the non-Windows installed on the computer programs also starts alongwith. In your case, it seems that some of these startup programs is responsible for the delay. You can disable startup programs and services non-Windows on the computer by placing the computer in what is called a "Clean-boot". If the problem does not appear in the clean boot state, you can track Windows service start defective or not programme following a policy of division and conquere.

  This process takes a little time. I would say by following the instructions in the following article to diagnose the problem:

  http://support.Microsoft.com/kb/929135

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• Photosmart5520-all-in-one: printer displays is not on the computer - cannot print

  I desperately need help... I have a photosmart 5520 printer all in one for more than a year, it is set up wireless with my laptop HP and up to today, it worked perfectly. I changed the ink cartridges yesterday and did a print and everything was fine. Today, I can't see the printer on my laptop... it has simply disappeared. I tried to open printing HP & doctor scan on my desk, but it does not, is not the printer shortcut icon.

  I tried to download the driver of printer again 123.hp.com, and although he has downloaded and saved in my downloads, when I try to run it, I get then them 'extracting files' the 'permission' box, but then nothing!

  What the hell happens and what can I do to fix it?

  I have very limited knowledge of computers, then all statements must be explained in a VERY simple!

  Thanks for the tips. It wasn't the printer, it was a problem with my HP laptop. ..... Idid a system restore last week and hey presto, it's all good now. I took note of your instructions anyway, just in case I have to do a restart in the future. I really enjoy taking the time to respond to my problem. Once again, thanks a lot. Jan x

• I noticed that some jpeg (RGB) images are not display in Internet Explorer 11, but they present very well in other browsers. In addition, the images used to display properly in Internet Explorer. No idea what is happening?

  I noticed that some jpeg images are not display in Internet Explorer 11, but they display well in other browsers. I checked they are RGB images, because apparently some people accidentally use the CMYK format. IE is configured to display the images - I checked that also. The images used to display properly in Internet Explorer, and the images have not been changed on the server. The content was created using Dreamweaver CS6 and Photoshop CS6.

  I tried to view the page on other computers running IE, and they also have this problem.

  Any idea of what could be causing this to happen?

  Thanks for looking in this people!

  I discovered that prevented a few images to display in IE 11, while other images show. The culprit was Adblock Plus for Internet Explorer. Once, I disabled the software Adblock Plus missing images showed once again. Interestingly, I discovered that I could cause the same effect in other browsers using Adblock software. There is either a bug in the software of Adblock, or fluid network of Adobe system, which caused some legitimate images should be blocked. Whatever it is, they do not play well together right now. All images are stored on the same domain, and none of them related off site, so it's pretty weird that they have been blocked...

  Anyway, the mystery is solved! I know people like to see a conclusion to these things as much as possible, so I'll mark this as resolved issue.

• There is a unknown device in the network map

  Then all of a sudden, when I open the network and sharing Center, there is an unknown device between my computer and my router. As I noticed this, I also noticed that when I tried to access the files or settings in the Control Panel, it might refuse me. For me to say the least! Any suggestions on what I should do?

  Hey, Jonesy, T.

  The steps of troubleshooting in this thread has worked for several user solve the problem with an unknown device on the network.

  Let us know if that helps.

• How can I see/display of the internal usb devices installed on the computer in my computer?

  I can't see the drive letters removable usb in my computer.  However, the removable usb drive letters are visible in disk management.  What can I do to display the letters of removable usb drive in my computer screen?

  Hello

  1. are you not able to see the readers or only the drive letters?

  2 corresponds to the letter displayed when the USB is connected

  I suggest that you try to rename the drive and check if it helps.

  I also suggest that you follow these steps and check if it works

  a. open the location of the computer and click organize.
  b. now, select folder and search options and click on the view tab in any drive
  c. now select the option "show readers, files and hidden folders. Click Ok

  I suggest that you send a screenshot of the screen that you refer to help you better.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows7/use-Snipping-Tool-to-capture-screen-shots

  See the link below to find out how to post screenshots or other photos in the forum discussions.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• USB stick detected and works but not displayed in the computer

  I am running windows 7 Professional. Any drive USB storage that I connect to my laptop is not in the computer. He is awarded a legitimate drive letter and I can access content drive by typing in the drive letter in the bar of navigation or term. I checked using the disk management utility. Operations on the work of perfectly good files. The only issue here is that the reader does not appear or is hidden in the computer. I put the folder options to display everything, IE. no possibility to hide whatever it is has been disabled. In addition, when you click the remove safely icon in the status bar, the device is listed as «...» "instead of real name and the ring road. Note that there is a user account that is my administrator account.

  Interestingly, I have created a new standard user account and was able to see the USB into the computer when it is connected to this account. Is there any setting I can change on my admin account to enable this? I would prefer not to have to create a new account and reconfigure all my settings.

  Hi VJ17,

  It could be that your user account has been altered.  See the following article:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this helps

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Sleep or Windows XP-based computer displays is not on the list of network in Windows 7

  I have a HTPC to Windows XP that I use for Hulu and Netflix (I will be upgrading soon) and network storage (set on the router via an ethernet cable), and when my laptop was on XP, I could go in network, click the shortcut of the computer (let's call HTPC-XP), and she wakes up the HTPC and allow me to surf on the shared folders. Since upgrading my laptop to Windows 7, it shows only active (awake) computers on the network and shows no caching of shortcuts I can click to wake up computers. I have to walk over to the HTPC in another room and press the power button to wake up from her sleep, then return to the laptop and refresh the network connections, and this can take several minutes for the shortcut is displayed, so that Wake-on-LAN with all the XP computers less than 15 seconds before.

  The problem seems to occur with other Windows 7 computers of sleeping too. I can't get a list of shortcuts to use persistent connections that I can click to wake a computer from the network. What is the solution here?

  Hello

  Please contact Microsoft Community.

  Wake on LAN is enabled by default in desktop computers but disabled in laptops. Please see the steps to allow laptops:

  1. Click the Start button, type network and sharing in the search box and press ENTER.
  2. Click on the Edit card settings link in the upper left corner of the navigation pane.
  3. Right click on the network connection you want to enable/disable the Powermanagement support on, and then click Properties.
  4. Click on Configure.
  5. On the power management tab, select or clear the checkbox allow the computer to turn off this device to save power .
     • When enabled, power management is enabled on the network adapter.
     • When authorized, power management is disabled on the network adapter.
  6. You can enable Wake on LAN for all methods of wake or package magic just activate WoL:
     • To enable Wake on LAN for all methods, check the allow this device to wake the computer check box
     • To enable Wake on LAN for a magic packet only, check the box to check allow this device to wake the computer , and then check the box allow only a magic packet wake the computer .
  7. Click OK .

   For more details, see the article below:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-wake-on-LAN-capabilities

  Please let us know if you still experience the problem, we will be happy to help you.

• Media Center won't play by video converter USB error ""files needed to display video are not installed or not working properly. " Restart the computer or Media center.

  I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor. What is the problem? Can it be fixed? I use questions cable 'Câble questions SuperSpeed USB 3.0/2.0 to HDMI/DVI for Windows and Mac up to 2048 x 1152/1920 x 1200' with windows 7. Is there another brand and model that works?

  On Wednesday, September 3, 2014 13:19:09 + 0000, CharlesHickox wrote:
   
  > I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor.
   
  I assume you mean WTV and not the WMV files? Likely the reason is that the adapter
  questions of cable is not HDCP compatible. (Rules of DRM Media Center
  apply).
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• My Explorer no longer displays this sidebar making the viewing of files and folders very heavy.

  Normally, Windows Explorer shows a side bar on the left side of the screen with a list of the places and on the right is a window showing the contents of any location is highlighted. My Explorer no longer displays this sidebar making the viewing of files and folders very heavy. Anyone know how I can get back the sidebar?

  Original title: display Windows Explorer

  Open Explorer

  -Layout - click on "Navigation Pane"

• I plugged my USB Modem to the computer, it's MMX352G micromax modem. After you connect to the internet, all browsers open the pages of the BM, but in the taskbar sign of the network is to have a red cross. Why?

  I plugged my USB Modem to the computer, it's MMX352G micromax modem. After the internet connection all browsers open the pages of the World Bank, but in the task bar sign network is to have a Red Cross and when I go over it, it says not connected, but I can always use internet in my browsers. Why? It causes an adverse effect on my computer.

  Hi Akash,

  Welcome to the Microsoft community. According to the description of the bar icon problem tasks of the network have a red x, but you can still access the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  I suggest you follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Windows wireless and wired network connection problems

  You can read this article for more information:

  How can I troubleshoot network card?

  I hope this helps. Let us know if you need more assistance.

• Since the last update when you import images directly into Lightroom, metadata display the correct focal length, but display no information of the lens, Lightroom reports only as "unknown lens", the news of the lens are in meta-data... whe

  Since the last update when importing image directly in Lightroom, metadata display the correct focal length, but will not display any information from the lens, Lightroom reports only as 'unknown lens', the info from the lens is in the meta-data... When you change an image in LR in PS then save, lens Info appears as if by magic. This is a problem of workflow for those who could use multiple lenses on a shoot... What is the status on this issue? I shoot with Nikon D800... thnx ted-lens-metadata-field-missing-on-import?topic-reply-list[settings][filter_by]=company_promo https://feedback.photoshop.com/photoshop_family/topics/camera-raw-9-5-lens-information-aux I posted this on FB with LIGHTROOM page, they instructed me to send you.  Needless to say that it is a huge problem for the workflow, and reduce my bright room isn't an option because whenever he do it takes two days to arrive, and I have no time to lose if I appreciate some type of response as soon as possible

  What is the status on this issue?

  The link you gave clearly indicates the status of this issue. Adobe is working on it.