Explorer.exe does not start at startup, and it does not display beyond the logon screen?

Similar Questions

• The computer is not displayed in the home screen more

  I got a program called Tune Up Utilities 2011 installed on this computer, but I uninstalled it because it was too expensive. Since then, the Welcome screen does not appear on the computer. I'm upset, because it showed 3 different users who have access to this computer. What could have happened. Also, when I look in regedit in the software, I see a program bundled with Tune Up Utilities 2011 I also uninstalled and it's still in the registry. How is it? Can I just delete these entries? What is dangerouse to do?

  Hello

  If you are still not able to see the logon screen, then try to run the Startup Repair tool and check if this may help:

  http://support.Microsoft.com/kb/308041

  Check if that helps.

• my desktop pic is not displayed on the entire screen. It has been moved and will not be back. __

  My office does not appear my picture on the entire screen. I tried to move it through its expansion, but it doesn't let me do.

  Right-click in the middle of your desktop

  A menu will appear > click Properties
  A window opens
  Select the Desktop tab
  This should give you options on how you want the photo positioned, tiles, centered and stretched.
  You want to stretch the image so that it covers the entire screen.

  Serving the community one computer at a time

• Portege Z830 - X 11 - enter key does not work on the logon screen

  suddenly, the Enter key does not work in the scrreen of connection (win 7 64 bit, toshiba portege Z830 - X 11), which some do not login with password.

  The on-screen keyboard sends the "enter" or the other.
  When in safe mode, everything works as it should.

  I solved this problem by disabling the password for the account, but I don't feel well in this situation.

  Help, please...

  Have you tried an external USB keyboard?
  Do this!

  Not very well why the ENTER key does not work on the login page, but I guess its problem of keyboard.

• ios10 - can not go beyond the lock screen

  I'm updating my iPhone 5SE yesterday.  It is already planted on the lock screen 3 times requiring a reset, that is to say press power and home for 10 seconds.  I've owned iPhones for many years and has never had to use the front reset feature.

  My contact ID is active, and most of the time when I press the home button the phone automatically unlocks as usual.  However on occasion, when I press the button to unlock the phone at home I am presented with the numeric keypad to enter my access code.  The phone does not respond after that, completely frozen until I do a reset.

  Try to reset all settings. No data is affected, but all parameters will have to be entered again. These parameters include, passwords for WiFi and footprint digital/Touch ID put in place. You will have to start all over again with the settings, but it's less work than the restoration of the device.

  Settings > general > reset > reset all settings.

• Problem installing windows 7. It will not go beyond the Welcome screen.

  Hello people,

  Good so I recently bought an SDS and trying to do a clean install of windows 7 but it doesn't let me get past the Welcome screen. Before even the colored balls appear and it just hangs there. I am really frustrated and tried a few things but nothing I try seems to work.

  Any help would be so appreciated!

  Hello a tad noob.

  It shows the SSD at all? I would check to see that it is indeed to be picked up by the BIOS, and if not, check the cables.
  Sometimes, the Windows installation can chuck a fit when it detects a disk with a sector of boot/MBR not valid and won't install it. To resolve this problem, you can try the following
  1. start Windows 7 disc.
  2. when the Welcome screen is displayed on the Windows installation, press SHIFT + F10, which will display a command prompt.
  3 type 'diskpart' (without the quotes) and press ENTER.
  4 Type "list disk" and press ENTER.
  5. If all goes well, you can see your SSD in the list. You should see a number identifier. Now type "select disk X" (where X is the number of your SSD) and press ENTER.
  6. type 'clean' and press ENTER. He will write an empty MBR, YOU WILL LOSE ANY DATA ON THE SSD if you had anything on it.
  I hope that one of these tips helps you:
  )
  suggestion of technocrat.

  Let us know if that helps.

  Marilyn

• Help! My HP TouchSmart laptop will not go beyond the logo screen!

  My HP TouchSmart tm2 with VL618AV product number lights after the logo screen. I really don't understand why it is happeniing because it's just more than a year. I have Windows 7 and there are errors on the computer. Please help me.

  Yes-HARD drive is the hard disk. No way to know, without more testing, if it's hdd or other material causing a no don't start machine. Try to remove to see if you get any further as I mentioned above.

• Windows 7 screensaver does not work for the logon screen

  I have Windows 7 Ultimate.  My login screen (the screen where the user list exists, with small icons, after Windows starts, will not allow the screen saver function is running.)  He mentions something Active X, he needs.  If I download the ACtive X item, how do I install it?

  Hello

  Regarding your question on how to install ActiveX on your computer, please check the post Naman R last January 26, 2010 on this thread.

  Other members of the community found it useful. Give it a try.

  Let us know how it goes. Thank you.

• Windows Anytime Upgrade will not go beyond the first screen. He tells me that my address is not valid, even if it is correct.

  I get my exact address, all fields of the form are 100% correct and it does not tell my that my address is not valid. I'm confused, because I have never had any problems to enter my own address, nor usually have problems try to give my money to people. I'll have to waste time on this is pretty insulting. Windows 7 has been well otherwise.

  Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• E260 will not go past the opening screen

  I got my 260 E for about a year and later that yesterday I went to turn it on, but it remains on the logon screen. Enter mode 'sleep', but I can't listen to music or find out anything because it will not go beyond the opening screen. The second of 10-15 soft reset I tried a hundred times, but it does not work.

  If remove/insert the battery did not work, the next step would be to format the drive.  You can also try to update the firmware.  I hope that you have a model v1.  What does say on the back of the drive?  Do you see a blue Sansa logo on the splash screen?  If so, you have a model v2 with no recovery mode.

  Assuming you have a v1 with the recovery mode:

  1. Turn off the player.
  2. Slide the key lock (to headphone jack).
  3. Press and hold the RECORD when connecting to the PC.
  4. Output RECORD when the "Welcome to recovery mode" message on the LCD s drive.
  5. Open my computer/Windows explore and see if you can find a new "16 MB - FORMAT" labeled removable flash drive
  6. Right-click on 16 MB-FORMAT and select new folder.
  7. Name the new folder "sansa.fmt" (without the quotes).
  8. Use the remove safely icon in the system tray.
  9. HOLD reset in the unlocked position.
  10. Disconnect the player from the PC.

  The player must, by seeing the folder sansa.fmt in the root directory of the drive, proceed to format itself.  Pay attention to any error/success message see you.  If all goes well, it will tell the full format and then to restart.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  If the format does not work, the next step is to try to update the firmware.  Go to the correct sticky message and download the firmware for your region .24A (assuming that he is a player of v1).  Drag and drop the embedded .mi4 and ROM files of archive of the firmware in the root directory of the 16 MB-FORMAT drive.  Make sure that the files end up in the root directory and not in a subdirectory.  Unplug and restart the player as before.

• I have sony camera "cyber-shot". But since last 3-4 months when I connect it with my desktop PC, it has not displayed on the screen. Why?

  I have a small handy device the company Sony. The name of the template is - Cybershot. It is 10.1 megapixel with screen 7 cm square. When I connect it to my PC of countertop, it is not displayed on the PC screen. I have already installed the software, I received with the device of the company. For a few months, he was allowed and eventually I had my PC formatted by a technician and then, he stopped the display. I asked the technician if he ruined the camera software, he said no, he has not touched the camera software. I bought the new USB wire to fix the problem. But it is still not resolved. Can someone give me the reason why the camera is not displayed on the screen of the PC?

  Hello Manu,

  1. have you checked if the camera software is present on the PC?
  2. are you able to connect other USB devices to the PC?
  3 have you tried to connect to other USB ports?

  Open the list of programs by clicking the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  You can try the following methods

  Method 1: As the PC was formatted, the software of the camera could have been uninstalled.  If you cannot find the software of the camera, I suggest you to install.
  http://eSupport.Sony.com/us/p/select-System.pl?PRODTYPE=7

   

  Method 2: If this does not help, connect your camera in a different USB port and check the status.

  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  
  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Method 3: follow also, troubleshooting of this article:
  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

   

   

  Follow the steps and let us know if this helps.  If the problem persists, answer and we will be happy to help you.

• Explorer.exe does not start automatically

  HII,

  When I restart my laptop is wrong on the desktop whenever I need to run explorer.exe thru new task (from the Task Manager)
  I also put explorer.exe at startup option still i m facing the same issue.
  How to solve this problem?
  

  Hello

  Logon as administrator

  Regedit start - type in the search box - CONTROL top - right Click-RUN AS ADMIN

  Navigate to this key

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  In the RIGHT PANE, double-click SHELL - value data and the entry should be explorer.exe.
  
  If you have ANY other information it please write and post here and of course change to the above

  Close Regedit and restart.

  Windows Vista explorer.exe does not start at startup
  http://www.WinVistaClub.com/T231.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

  I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

  Hi HiteshAstan,

  one) don't you recall making any changes to the computer before this happened?

  (b) what exactly happens when you sign in to your account?  You get a specific error message?

  Step 1: Let us check if the problem persists in safe mode

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  If the problem persists, you can deduct that the user account is corrupted

  Step 2: Create a new administrator account and then try to repair your user account

   

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  After the back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Explorer.exe does not not at startup or in safe mode

  I have a Dell desktop sp3 XP runnig which is more properly load explorer.exe started, regardless of whether the computer is in safe mode. load the moment he disappears.  I can't get into the Task Manager and run programs there but if I use this to launch explorer.exe, comes again for brief moments and then disappears again.

  I repaired XP from the disk installation without any difference.

  I tried in safe mode no difference.

  I ran ccleaner to fix registry problems with no luck.

  I copied "explorer.exe" and rename the copy "explorer2.exe" and redirect the register to the new value without any difference.

  I'm running out of ideas here. Does anyone have smart solutions?

  Hi big Ryan,.

  Since this thread is very old, I suggest that if you have a similar problem create you a new thread for it by going here:

  http://answers.Microsoft.com/en-us

  I hope this clarifies the situation of the question more clearly.

• Windows 7: Explorer.exe does not start but if manually run it restarts my laptop.

  My laptop HP Probook 4530 s boots until the Welcome screen, it does not continue to show the desktop instead, it shows only a black screen.

  As I entered in the Task Manager, I tried to check the process and discovered that "explorer.exe" is not running. I created a new task, browse the explorer.exe and run. It shows the office, but after 10 seconds or less, it restarts and goes back to the black screen after the Welcome screen.

  How to solve this problem?

  Hi Mark,

  Check if the Userinit registry value is correct. To read, use the command:

  Press Windows key + R, and type:

  cmd /k reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Userinit".

  Copy what is displayed in the output and after here.

  Similarly for the value "Shell:"

  cmd /k reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Shell."