Explorer.exe has errors on start up that invites a temporary office to use. Vista was preinstalled, so I don't have a version of re - install?
Explorer.exe has errors on start up that invites a temporary office to use. Vista was preinstalled, so I don't have a version of re - install?
Any manufacturer should provide a means of recovery, it is more often to another partition on the hard drive which is accessible at startup. See your documentation for instructions to access or post with the brand and model of your system for instructions.
As for the error, it means that you have a corrupted profile and these cannot be fixed. What you need to do is to connect to another administrator account and create one for yourself. Log in there and copy your personal files before deleting the original. The process is described in this article: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
I have a creative cloud account and stupidly click the upgrade button and began a "trial period" of Photoshop that I already own. Well, the "trial period" failed and I don't have a version of Photoshop to use even if I'm still topical. How to make
I have a creative cloud account and stupidly click the upgrade button and began a "trial period" of Photoshop that I already own. Well, the "trial period" failed and I don't have a version of Photoshop to use even if I'm still topical. How to get back to my "old" version of Photoshop?
Are you sure that you are using to connect, use the steps in the correct Adobe id: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html
Let us know if that helps.
Dell Dimension XP SP3 Media Center. Started with the error box of explorer.exe has a problem and needs to close to logging in any user. Information about the error is explorer.exe 6.0.2900.5512 user 32. dll mod ver 5.1.2600.5512 offset 000d9d9
When you click on debug a doctor Waston has encountered a problem error box. Error closing box you take at bottom of screen with no icons or taskbar. You bring up the Task Manager, but does not run any new task. After studying the problem found that run sfc/scannow will bring back normal office and functioning of this session. Problem returns the next time the computer is started. Update history audit showed an installation failure of update KB 971029. Reinstalled update and normal office appeared for this session. sfc/scannow application of Service Pack 3 CD 4 times and WinXP CD2 6 times. Using XP CD provided with the computer says it's the wrong CD. Cancellation through sweeping back normal functioning during this session.
· Do you remember all the recent changes on the computer before the show?
Try the methods below:
I suggest to complete the process of analysis of the system, you can follow the steps in the link when he asks for the CD-ROM service pack below: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)
If that does not help, then try to perform the system restore and restore the computer to the previous date it worked great:
How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084
I am not sure what happened, but I was downloading of images for a slideshow and I didn't notice that my laptop has been restarted due to an update. I thought it would be to find until I started to run into an error with explorer.exe. When I go in the folder of the situation to show them as a slideshow of the pictures, the screen goes black, as it is supposed to and then crashes. From there on, I get a notification that explorer.exe has stopped working. Do you think the problem is a corrupted image file should I remove? It doesn't bother me if I have to because I know where to find them again.
I would suggest trying the following steps and check if it helps.
Step 1: Start the computer in safe mode and check if the problem persists.
Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly or may prevent Windows from starting correctly.
If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.
Step 2: Recreate the slideshow and check that it works very well.
Original title: explorer.exe
My explorer.exe has stopped working several times and I tried to start in the Task Manager, but he tells me that he has ceased to work every time
Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior. If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.If you continue to experience the problem, consider creating the hierarchy of following registry keys in the registry:HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata. Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen. It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrive file and provide a link.(Letter is an environment variable that represents the system drive, usually C:.)
I am running Mirosoft Windows XP Professional Version 2002 Service Pack 2Before that, I really want to customize my windows and then I search in google "how to customize windows xp visual styles. After that, I follow the 7 steps how to customize. This is the link I will:http://www.WikiHow.com/customize-Windows-XP-visual-stylesThen, after I followed the steps, it asks me to install this: Neowin patch. When I installed it, it says that my OS is not original, but I just reinstalled the last time.Are the cause of the problems of the patch that I installed it in the first place?Is it related with my OS?How to solve this problem?URGENT!
Thank you to contact Microsoft Community and we will be happy to help you with your concern.
According to the description, it looks like you are facing a problem with the Windows XP operating system.
It would be great if you could answer these questions to help you further.
1. When you receive this error message, Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be 'read '?
2 is the issue limited only to Neowin patch installation?
There could be a conflict of memory with a driver or due to the bad memory or memory.
I recommend you to check with the activation status of Windows XP.
a. Click Start.
b. click on all programs, then accessories.
c. click System Tools.
d. click on activate Windows.
Windows XP Visual Styles, see the steps in the following Microsoft article.
Keep us informed on the status of the issue.
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
original title: explorer.exe has stopped working
whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.
The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.
Refer to this article for help:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.
Microsoft technical support engineer
HelloI have a problem with my windows 7 professional service pack preload. Sometimes I open a windows folder displays an error message "explore has stopped working... and then he retrieve as Explorer begins with success...» Sometimes give a warning entitled... "Explorer.exe - application error.and contains "the instruction at 0x032d0fef referenced memory at 0x032d0fef. The memory could not be written. Click ok to complete the program." While what happens sometimes, I will shut down my system.Can anyone give a solution for this?
The module that seems to be the question is the UninstallExplorer32.dll:
Fault Module name: UninstallExplorer32.dll_unloaded
The UninstallExplorer32.dll seems to be a component of IObit Uninstaller:
Can you try to update or, if necessary, uninstall IObit Uninstaller.
I downloaded Internet explorer 8 for windows xp, after the system restarted, a pop-up box appears which says 'explorer.exe - application error. The application failed to initialize properly (0xc0000005). Click on OK to terminate the application. "there are no icons on the desktop so I can't even in the Panel of control etc. How can I get this sorting?
You are able to get in Mode safe?
If so, check in the case of the newspapers to see if you can see a similar error message. It can give more details.
Then try to run Chkdsk to check for errors. Right-click your drive, go to properties, tools and error checking.
You can also do a system restore to get back before you receive the error in the Solution Explorer.Article number: 306084 - How to restore Windows XP to a previous state
http://support.Microsoft.com/kb/306084Let us know if that helps.
original title: OOPS! Remove Solitaire games by mistake
My husband used a cleaning program that has removed the solitaire games that come with the software package of vista. Is it possible to recover?
Try to reinstall the game Solitaire to turn on or off Windows features.
I want to go back to the previous version of 2014.2. .3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.
2014.3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.
You don't mention what you have encountered errors? Workaround for the problem more frequently reached here is Re: error in Muse: object UID:U6875 has two (or more) owners: U3633 and U3165
If you have a copy of your .muse file that has not been saved by using 2014.3, you can downgrade by uninstalling Muse, and then choose the previous Version in the drop-down list of filters in the Panel of Apps from the desktop creative cloud application. There will be a popup next to the Muse, where you can select a version prior to install.
I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
How to replace Microsoft software or hardware, order service packs and replace product manuals
The pdf I want to change has all embedded fonts. When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem
The pdf I want to change has all embedded fonts. When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem if I'm updating from Acrobat X?
You have the fonts installed in the system. This has not changed. (Having the police is not always enough, but it is certainly necessary).
PROBLEM: Clicking on Windows 'Explorer.exe' (or the shortcut of the program itself) causes the following error msg (under the title: "explorer.exe"): "this file does not have a program associated with it for performing this action." "Please install a program or, if such is already installed, create an association in the default programs control panel".
ADDITIONAL INFORMATION: Work around successful - even if it's not ideal - is the following: when I right click on the shortcut of windows Explorer, a list of folders "frequent" previously selected appears. When I chose one, windows Explorer opens properly and points to the selected folder. From there on, can I nagivate to any other directory/folder correctly.
I fear, however, as to why the shortcut/program file themselves are causing the error message.
I get the same error (this file does not have a program associated with it for performing this action.) Please install a program or, if such is already installed, create an association in the default programs control panel)
More funny thing is that I can click on computer and Explorer works very well. The shortcut on the taskbar and Windows Explorer under the accessories section are affected in this way. All other files with exe extensions seem to work well. I'm running Windows 7 32-bit version.
See repair error file Association at the launch of Windows Explorer in Windows 7. Ramesh Srinivasan . The Winhelponline Blog
Microsoft MVP, Windows desktop experience
Hi, my brother has an Optiplex 720 or 780, don't remember exactly. I just reformat and reinstalled the Windows 7 Ultimate 32 bit about a week ago and installed all Windows updates. Everything seemed fine until yesterday, when he said that he went to for use and he was just a black screen with the mouse cursor. After checking the internet, I discovered that the explorer.exe process is missing from the Task Manager. I am able to start explorer.exe in Task Manager myself, but how to get Windows to do as it should? There are no errors related to the problem at all.
Here's what I've done:
System Restore did not fix the it.
It does the same thing in safe mode.
Video drivers are to.date according to Windows Update.
In regedit, explorer.exe is next to the shell
There was never any antivirus installed on this installation
Any help would be greatly appreciated, thank you.
If you had any antivirus installed don't then its probable infection. Clean install Windows 7 after wiping disk preference...
Then use the Windows 7 upgrade license to Windows 10:
Maybe you are looking for
Hello! I can't find any software (Toshiba or Intel) on my Portege Z930 that allows to manageprofiles of connections to be automatically connected GPRS or Wifi or LAN regardless of connections available (office, home, public area...) Toshiba Wirelss m
Network device, control device, wirelles conection problem
My question is about Microsoft Visual C++ Redistributable.I have a machine with the Visual Studio 2005 development environment and 2008. I'm going to develop an application in VC ++ with VS 2005 using the dll in Visual Studio 2010 (mfc100.dll for exa
First of all: Product name: Compaq Presario CQ57 301SA Operating system: Windows 7 Home Premium (64-bit) My problem is that whenever I try to boot my laptop with only the battery as energy source, it does not start. The equipment starts and everythin
I received a notice that my windows is not genuine. I think something is changed in the files of KMS. I tried to fix and change product key number but this error. seems that the computer could not connect to the server to get to turn on authenticatio