Explorer.exe has stopped working

Similar Questions

• Whenever I open my computer I get this message: "explorer.exe has stopped working".

  original title: explorer.exe has stopped working

  whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.

  Hello

  The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  
  Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Windows 7 64 bit Ultimate - Explorer.exe has stopped working (AppCrash)

  It happens when I open the readers (problem happened in 2 of the readers). Windows exporer just stop working and restarting Explorer, but nothing worked I looked out in the net for the solution. the window displays:

  Problem event name: APPCRASH

  Application name: Explorer.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc60d

  Fault Module name: ArcSpl.ax

  Fault Module Version: 2.4.2.45

  Timestamp of Module error: 448f57ee

  Exception code: c0000005

  Exception offset: 0000c28a

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: a7aa

  More information 2: a7aa91f17ea749d42a4de3b390fa5b3d

  More information 3:a7aa

  More information 4:a7aa91f17ea749d42a4de3b390fa5b3d

  Please, give suggestions so that I can fix my PC.

  Error to ArcSpl.ax as the failed Module points.  This module belongs to the ArcSoft MPEG splitter program.  The module goes back to Wed Jun 14 00:27:26 2006 and is probably not compatible with Win7.
  Please uninstall the ArcSoft program and see if that stops at the AppCrashes.

• Explorer.exe has stopped responding during the slide show.

  I am not sure what happened, but I was downloading of images for a slideshow and I didn't notice that my laptop has been restarted due to an update. I thought it would be to find until I started to run into an error with explorer.exe. When I go in the folder of the situation to show them as a slideshow of the pictures, the screen goes black, as it is supposed to and then crashes. From there on, I get a notification that explorer.exe has stopped working. Do you think the problem is a corrupted image file should I remove? It doesn't bother me if I have to because I know where to find them again.

  Hi WyldFyre254,

  I would suggest trying the following steps and check if it helps.

  Step 1: Start the computer in safe mode and check if the problem persists.

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly or may prevent Windows from starting correctly.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Step 2: Recreate the slideshow and check that it works very well.

• WRT400N setup.exe has stopped working

  I just got a HP Pavillion desktop computer new with Vista 64 and I have problems installing. Whenever I put the installation disc in the drive it does not load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried to jump the autorun and will my CD-ROM drive and manually select the file setup.exe. The initial splash screen appears and says please wait loading but I never have any more than that because the program crashes. I thought that maybe the drive was defective, but I tried it on a XP desktop and an XP netbook and the disk works fine on both. What gives? I searched this whole Forum and it seems I am the only person with this problem. My new defective computer or is it the user

  OK, so I finally understand for me. I did an exploring more of the disc and found a file named setup64.exe and TADAAAAA this file runs. But I still can't LELA to run but hey at least I have everything works now

• Error: "Setup.exe has stopped working".

  Trying to open a downloaded file that updates a driver Lexmark (Z600), the process ends quickly with the dialog box stating that "Setup.exe has stopped working. Windows Explorer needs to close".

  You can try a right-click on the setup.exe > run as admin.

  Or repost in the following Forum:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question Driver Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• sqldeveloper64W.exe has stopped working

  Summary of the problem

  ---------------------------------------------------

  Error message: sqldeveloper64W.exe has stopped working when you try to open the .sql files

  Description of the problem

  ---------------------------------------------------

  Breast of SQL Developer 4.0, I went into Preferences > File Types, find the extension .sql and checked the box that says Open with SQL Developer.  I went to the Associations the value Control Panel in Windows 7 Professional 64 bit and confirmed that the current default is set to sqldeveloper64W.  I have used the CMD function for access to regedit, deleted the file associations for .sql and return all preferences.  If the SQL Developer is not already open on my machine and I am trying to open a .sql file, the application starts very well.  If I try to open additional files in the windows or windows Search Explorer, I get an APPCRASH indicating that sqldeveloper64W.exe has stopped working.  I click close the program and developer sql remains open, but my file does not open.

  Error codes

  ---------------------------------------------------

  sqldeveloper64W.exe has stopped working

  Try changing the sqldeveloper64.exe shortcut instead. This will give you the CMD window when it is opened. We'll see if we get interest error messages here when you try to open additional files.

  Once you run SQL Developer time away - force look for a 64-bit JDK, you can simply run the main sqldeveloper.exe in the main folder...

• sqldeveloper.exe has stopped working

  I get this message that says "sqldeveloper.exe has stopped working" when I double click on a file .sql using windows Explorer 7. My sqldeveloper application is already running and remains in place and connected to the database server. My two options on this line are 'close program' and 'check online for a solution. " I chose "close the program", but the program does not close. 'find a solution online' does nothing. There is no associated icon .sql files displaying in Explorer. Should there be?
  If I use sqldeveloper to navigate to a .sql it will open it. He can't open the .sql files. But I also have to work when you search for files by using windows Explorer.
  Anyone have this problem? If so, how to solve it?

  You drag the older plants? I don't normally open windows files, but I did the other day and he starts SQL Developer 1.5. I used 2.1 and then several pre-releases from 3 up to production given that I used last 1.5. It seems that associations not updated files.

  Maybe you have an old facility, non-working, which is giving you the problem.

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• HPSF.exe has stopped working

  When I try to open HP Support Assistant, I get an error message that hpsf.exe has stopped working. Application has encountered a problem and needs to close. My warranty expired on 12/09/2012. HP Support Assistant disappears when the warranty expires. If this isn't what someone has an idea how I can fix?

  Hello

  It's nothing to do with your warranty ending, however this can be a fickle piece of software.

  Try the following.

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the computer.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• TosIPCSrv.exe has stopped working on Satellite A300

  When I start my computer... (Vista) I have Toshiba Satellite A300
  I get a warning said: TosIPCSrv.exe has stopped working

  What it means? How should I do?

  Hello

  Seems the TosIPCSrv.exe belongs to the Toshiba S.M.A.R.T. Log Service.
  This can be found in:

  C:\Program files\toshiba\smartlogservice\tosipcsrv.exe.

  I'm not very well what is this process, but you could it enable or disable it in m
  MSCONFIG (type this in the window RUN) and check the startup and Services tabs.
  You need to find tosipcsrv.exe

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay

• Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

  Hello

  I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

  After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

  I tried to uninstall the manually, but I got the same message.

  These programs are;
  Setup driver Atheros
  Toshiba hardware configuration
  Toshiba supervisor password
  Realtek High Definition Audio Driver

  So I can't go ahead with the upgrade.

  Anyone know what could be the problem?

  Thanks in advance,

  Pouvez - TR
  .

  Hello

  Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

  Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

  If you did a recovery facility before the upgrade?

  Welcome them

• Satellite A300 webcam problem - CEC_MAIN.exe has stopped working

  Hello

  I have problem when I open my webcam Ii see this message:
  + Cec_main.exe has stopped working.

  http://www.assayyarat.com/MyImages/Sep08/bloool_Untitled.jpg

  Can someone help me?

  I m wondering how someone can help you if you n t post something on your laptop and installed OS?

  Just for the note; Have you tried to reinstall the webcam software?
  Maybe you should try this instead of waiting and waiting and waiting

• ATKEX_cmd.exe has stopped working

  

  

  Hi all

  I'm struggling with this problem ATEX for awhile now and still not found a solution myself.

  I hope someone knows the answer to solve.

  whenever I have start my pc I get the same error "ATKEX_cmd.exe has stopped working" around 5 times in a row!

  You can see a printscreen of it added to this post!

  I had personally never heard of ATEX so much, I searched on the web

  and did not even find why I need exactly.

  In any case, I came to know that it is in a part of my registry so it's like all the other parties 'binary codes.

  and it would probably be affected by malware because I never changed anything in my regedit on this pc so far.

  So I did a SFC scan and I did a few malware scans and scanned and fixed my registry with some of the best free products (like ccleaner and so on)

  There is no malware detected and the registry got some repairs (as always) and some of the binary codes that had to be quarantined or deleted had to do with ATKEX!

  but the same problem still occurring...

  I'm not able to find the ATKEX_cmd.exe but I found the folder named 1.01.02 under "C:\Program Files (x86)\ASUS\AXSP\1.01.02' witch contains 3 files named:"ATKEX.dll","atkexComSvc"and"PEbiosinterface32.dll"so as you can see the DLL is still on my pc)"

  You can also see the printscreen of it in my post

  I also ran into problems when I tried to update the BIOS of my motherboard asus maximus vii ranger, because apperently I need to rename the cap file before updating, I feel that this could be the cause, but I'm not sure what I should do now

  I'd appreciate if someone could help me!

  Thank you very much!

  Maxim

  Hello

  It seems to be linked to the Realtek drivers - are you game?

  http://Rog.ASUS.com/Forum/showthread.php?47776-problem-with-Realtek-HD-Manager-load

  http://Rog.ASUS.com/Forum/showthread.php?48938-Mei-drivers

  Edit:

  ASUS computer

  atkexcomsvc.exe runs as a service in Windows (asComSvc) from the bottom. This service runs under the SYSTEM account with extensive privileges on the local computer and acts as the computer on the network.

  http://www.boostbyreason.com/resource-SHA1-561eedde165abd24e6d170799332b78c162c19d5-atkexcomsvc-exe.aspx

  It is loaded by atkexcomsvc.exe on Asus computers