Explorer has caused an error in Kernel32.dll

Similar Questions

• _ "Windows Explorer has stopped working" error - HELP Please! __

  I tried pretty much everything I can try in this thread, and nothing seems to work! It is very probably the the most annoying problem that I experienced with windows! I can open all the files and programs it is just that the 'Windows Explorer has stopped working"error appears literally every 5 to 15 seconds!  I click on cancel, and the other appears which says "Windows Explorer restarts" help please, I've never been more ready to give up on windows for good!

  Thank you, Bryan

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Get the error message "Explorer has encountered an error and needs to close" in Windows CE 5.0

  Original title: windows explore it and iexplorer error on mini pc running windows THIS 5.0

  I have a mini pc (pc705?) running windows this 5.0 and I cannot get the browser to work. He said he has encountered an error and needs to close. I tried everything but without exploring, I can not even what it is. It is online but still error. Can anyone help!

  Hello

  Perform the steps in the article, and check if the problem persists.

  "Explorer has encountered an error and needs to close" Error Message When you start Windows XP

  Hope that helps.

• Windows Explorer has stopped working error - I can't right click a folder on the desktop.

  This is my brother's computer, and they do not arrive in his account, only mine.  I have administrator rights, but it seems not to matter. This problem occurs only occasionally.  For example, I can right click on this text, copy it, then paste it.  However, if I go to the desktop and try right click on a folder to rename it, I get the error.  The error indicates that Windows Explorer has stopped working, when it says that it restarts, then the Office updates really quick. None of what I found in the forums have worked again this is why I started a new thread.  I think it might be a problem with the registry, then someone can please help me quickly find a solution?

  Note: I can not run as administrator command prompt because I can't right click, so I can't run sfc/scannow.

  We are volunteers here for the most part.

  It's a shame that we don't know anything about the distressed system but it was MS Answers owners have chosen to implement this community - do not ask basic system information when a new question is asked that make problems a lot time and frustrating.

  But now they way they choose to turn things around here.

  Maybe this will help you with your system of unspecified of brand and model with the release of unspecified Windows and Service Pack and unspecified install antivirus/antimalware:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:
  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display.
  Choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

  

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

  You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

  You can Google something like:

  Windows Explorer crash

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!

• Windows Vista black after login screen and Explorer has stopped working error

  Hello world

  I have a very big problem. Whenever I connect to my computer that is running Windows Vista Ultimate Edition all I get is a black screen and a mouse pointer. I can use Ctrl + Alt + Del or Alt + Ctr + Shift lift the the Task Manager, and from there I can run firefox. Once in Firefox I can use the option open the file to find programs, do a right-click and then run them. But I want my back office. When I try to run Explorer from the Task Manager and then I get an error message saying it stopped and must be closed. I also keep getting an error message for something like 'Windows Search Protocol Host' or somesuch. A large part of time that this will just about a five-minute cycle in a style of window minimized down thing then the error message poopping upwards. I am also quite unable to open Control Panel or MSCONFIG. Whenever I try that they freeze and I get an error message saying that they have a problem and need to close. Also I did not change my software recently. In fact it worked fine yesterday when I was with Photoshop Elements 7.0. Another thing that can help anyone trying to find an answer that is in most of the forums help I saw people talking about going into regedit (something I CAN open it) and put the shell on explorer.exe. Mine is already set to explorer.exe. It is also something else that many videos help and forums have said I should close explorer.exe in Task Manager process tab, then run it again. I don't have an explorer.exe in the processes tab and when I try to run it I just get "WIndows Explorer has encountered a problem and needs to close."

  Please help people, I'm going nuts without a desk job.

  PS. I use the computer with the problem to type this.

  Hi, Eric D1979,.

  Glad that you've found the malware but it would be very wise to check further as there is no program can
  detect and remove any malware, and often some that is easy to find is bundled with others which are very difficult
  and later you really be touched when it is active. Better to be safe now than sorry later.

  Hello

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Explorer has stopped working - error status Code - c000009c

  Original title: Windows Explorer has stopped working - debilitating Error Message

  On my main account, I keep getting an error message that pops up every 4 to 8 seconds and freeze the rest of the screen. It comes from Microsoft Windows and the error message indicates that Windows Explorer has stopped working the details include:

  Signature of the problem

  Problem event name - InPageError

  Error Status Code - c000009c

  Media Type-00000003 vulnerabilities

  OS version - 6.0.60012.1.0.256.6

  ID of locale - 1033

  Additional information 1-40 d 4

  Information additional 2-4062ad41ec8067256aa4c5e2b56d3c79

  I can't access the internet and my computer through my secondary account - I of course tried closing down and restart a dozen times, I have ensured that all the Windows updates are installed and I am at a loss for what I could do. Any help would be so appreciated, because I'm working on my computer and couldn't since a few days - get desperate!

  Thank you very much!

  Thank you

  Hi Jessicaco,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-Explorer-crash-bug-Explorer-has-stopped/06f4ac0c-E486-491e-8861-30903b8791b1

  I hope this helps!

• Windows Explorer has stopped working error

  Yesterday, I tried to install a program on my computer that is running windows vista after that the computer has stopped working.  It starts go to the home screen and then the screen turns black with a white cursor you can move.  I can start the Task Manager and the cmd mode.  I can boot into safe mode only until I get the message windows explore has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to boot to the last known good configuration, but that did not work.  I think that the program has put the memory on the Board, but I'm still not a person of intermediate knowledge on this topic.  We didn't backup our files and of course need them.  Thank you

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Internet Explorer has stopped working (error message)

  Internet Explore has stopped working, screen kept popping up this error message, what could be the problem, just bought my laptop three days ago thank you

  Hello

  Please join the errormessage, we may be able to resolve correctly.

  Have you tried to switch to IE 9?

  http://Windows.Microsoft.com/en-us/Internet-Explorer/downloads/IE

  Kind regards

  Joel

• My office does not connect to the internet. He says that Internet Explorer has encountered an error. The error seems to be an iexplore.exe ieframe.dll

  I have a laptop and would like to know if it is possible to download a patch on this computer and copy it to a disk to repair the desktop computer? I also found that the appearance of the windows update is disabled and so there have not been updated on this computer for about a year.

  Hi conniekingrdh,

  Thanks for posting. I would say is to search for viruses, spyware and software malware.  I've included a few websites for utilities that you can use to analyze your computer against viruses and spyware. I would like to use more than one, none of the products, which include every viral infection.

  Microsoft Security Essentials
  Microsoft Security Essentials offers protection in real time to your PC at home that protects against software viruses, spyware and other malicious software.
  http://www.Microsoft.com/Security_Essentials/

  Microsoft Windows malicious removal tool
  This tool checks your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove the infection if it is found. Microsoft will release an updated version of this tool the second Tuesday of each month.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ad724ae0-e72d-4f54-9ab3-75b8eb148356&displaylang=en

  SuperAntiSpyware
  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms.
  http://www.SUPERAntiSpyware.com/download.html

  Malware bytes Anti-malware (Freeware)
  http://www.download.com/Malwarebytes-anti-malware/3000-8022_4-10804572.html

  Trend Micro HouseCall - Free Online Virus and Spyware Scan-
  HouseCall is a free on-line virus scanner offered by Trend Micro, which checks if a computer has been infected by viruses, software spyware or other malicious software. HouseCall performs additional security checks to identify and fix vulnerabilities to prevent re-infection.
  http://housecall.trendmicro.com/

  I hope this helps! After back and let us know if you can you solved.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Explorer has stopped working error message when I access my folder of snaps

  Window #1:

  Explorer Windows has stopped working.

  Windows is looking for a solution.

  Option: Cancel box

  Window #2:

  Explorer Windows restarts.

  Option: Cancel box

  Come this error message when I try to access my folder only snaps.

  Please help me.

  Hello

  A few questions will help us better to solve your problem. Please answer these questions for us:

  1. what operating system do you use?

  2. what programs you have problems with?

  3. is there an error message generated?

  4. what type of file you go when this happens?

  5 How long this issue is past?

  6. is there anything changed/added/deleted before this issue popped up?

  It's basically the who, what, when, where and why of troubleshooting.

  Eddie B.

• "WINDOWS EXPLORER has STOPPED WORKING" error every time I try to open things like 'Control Panel' and any other file of windows.

  This happens when I try to open any file from windows Explorer. It began to happen yesterday after my mother has finished using the computer. I think she did something (a click on something online somewhere) and may have introduced a virus into the computer. We have only a very minimal virus protection so I see not what is a great possibility. When I came home there was some files randomly on the desktop and I went to "My computer" right now (with difficulty) and removed all the new things, she got on the computer, that she doesn't want to download (which means they came when she clicks on something somewhere online). I thought I had fixed it but now I can't even open 'my computer' because of this error. Help, please

  Loading Windows in Safe Mode and check if the problem is here. You can use the system restore as well. You can also use this program and disable Windows Explorer extensions that were not Microsoft.

• Host process for Windows Services has stopped working; Error Module mck_cbpdbfclh.dll

  New applications were loaded on my computer and it worked well for about 1 week. Restored, a couple of files Windows of my trash, defraged, cleaned cache, updated anti-virus deep system (no exceptions); Everything seemed to work well for a day or two, now it starts once more but this time as a second module fault that is affected; However, the app name svchost.exe is always the same.

  Signature of the problem:
  Problem event name: BEX
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47918b 89
  Fault Module name: mck_cbpdbfclh.dll
  Fault Module Version: 2.2.2.1571
  Timestamp of Module error: 4b 639291
  Exception offset: 0001c58b
  Exception code: c000000d
  Exception data: 00000000
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 26fd
  More information 2: 3a6ffdfc079a2763c1943b10334f085c
  3 more information: a 66, 3
  Additional information 4: dbdead176fce251e933ae5f8a503897b

  Hello

  the mck_cbpdbfclh.dll file must be a virus/trojan. I don't know a DLL with a name like. Run an AntiVirus tool!

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Internet Explorer has encountered an error

  When I play gamesville. Com, on every 45 seconds the error message indicating that the Internet Explorer problems, will see if they can resolve and reopen, it will always open in a different window. I know that this is not my career or the modem because I play the same game on my laptop and it works fine.

  Hello

  First, reset Internet Explorer as follows: be aware that this will remove bookmarks and saved passwords etc

  Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

  Then, reinstall Adobe Flash as follows.

  Download the Flash uninstall utility on the link below and save it to your desktop.

  Flash Player Uninstaller.

  Once the download is complete, close all browser windows and start the program uninstaller.  Once done, restart the PC.

  Then, download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before download. 

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if your game will play Ok in this browser - if it does, close Firefox, open Internet Explorer and click the Adobe Flash even above to get a command prompt to install the ActiveX component.  Once completed, restart Internet Explorer.

  Kind regards

  DP - K

• Microsoft Explorer has encountered an error and needs to close. can someone please? I wrote the details below

  AppName: explorer.exe AppVer: ModName 6.0.2900.5512: explorer.exe ModVer: Offset 6.0.2900.5512: 000094a 6 C:\ DOCUME~1\Me\LOCALS~1\Temp\5c3a_appcompat.txt

  Hmmm, download and install...

  http://www.Malwarebytes.org/

  Restart in Mode safe...

  http://support.Microsoft.com/kb/315222

  and then scan with Malwarebytes.

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Ran cleaning, windows.old abducted have now explore has stopped working error BEX

  Windows 7 32 bit

  Signature of the problem
  BEX problem event name
  Explorer.exe application name
  Version of the app 6.1.7601.17567
  App timestamp 4d6727a7
  Crash module StackHash_0a9e
  Version of the module 0.0.0.0
  Fault module timestamp 00000000
  The 00000000 exception offset
  Exception code c0000005
  Data of the exception 00000008
  Operating system version 6.1.7601.2.1.0.256.48
  Regional settings I would like 3081
  Etc.
  Occurs immediately after the connection and all I get is a black screen.
  Appreciate help to solve this problem.

  Tried all kinds of patches, but had to use to restore the old restore point. Back up and running then reinstalls all other updates since the last restore, some 94 updates point more IE 10.