Explorer Windows has been slowing

Hi, I am a student of 23 years

I have windows 7 installed on ASUS N46V with Intel Core i7, 4 GB RAM, NVidia GeForce GT 650 M 2 GB VGA.

I noticed my computer, especially associated with windows Explorer has been slow latley.

The startup time has been slow, take more than 2 minutes, just to get to the opening screen of session, and even after the opening of the session, there are still 4 minutes before the computer really ready to use.

Windows Explorer sometimes takes time to load the content foledr even if the record were small and not much content in

The right click menu takes about 30 seconds and still longer to load.

Research on the start menu benefits times the load of the research.

I have little problem with other programs, I use ACDSee without lag, even play games such as Skyrim and Rome Total War without any major lag. So I suspect the problem have been matter of realted to windows Explorer.

As I open the Task Manager, I noticed that svchost taking 600 MB of RAM, and there are several other smaller svchost with about 100 MB.

I use Avast Anti Virus Premium and active, and several times a month to do a boot time scan, but ussually found no important problem of virus.

Please give me your assessment, treatment and advice.

Thank you

Hello Gita,

Please provide detailed information on this issue. I apologize for the inconvenience caused to you. I will certainly help you in this matter.

This problem may be due to one of the following problems:

  • You are using an outdated or corrupted video driver

  • System files on your PC can be damaged or do not correspond with other files

  • You may have an infection of viruses or malware on your PC

  • Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working

I would like to know;

  1. You did changes to the computer before this problem?

  2. You receive a message/code error on the computer of Windows 8?

I suggest to try the procedure described in the following Microsoft Support article and check if it helps.

Error: Windows Explorer has stopped working

Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

Important note : Do NOT steps to upgrade on site and system restore.

Also check out the link to improve PC performance:

Ways to improve the performance of your PC

Improve performance by optimizing your hard drive

Note: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

Thank you

Tags: Windows

Similar Questions

  • Windows has been slow to open and load since download IE8.

    Original title: slow loading.

    Windows has been slow to open and load since download IE8

    [Another county heard...]

  • Computer has been slow to start, Blue Screen of Death appears and then it restarts.

    Original title: Restart the computer

    Hello

    My old Compaq desktop computer has been slow to start in the morning and recently when I went to turn it on, it got stuck on the boot sequence, and it restarts just after the initial start-up. He never Windows logo or the login screen. I tried to use recovery disks of Lenovo's laptop of my husband as an attempt to get something to work on, but nothing helps, my computer continues to restart loop way. My daughter has tried to do something with the BIOS setting, which did not affect the issue. Rather than restart suddenly, the blue screen of death appears and then it restarts.

    Any help?

    Hello

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD (sale at retail or OEM integrators), which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • The address window has been reduced. How can I make it any longer so I can see the address (or most of them at least)?

    I've updated to Firefox for Mac 3.6.23. I have OS 10.4.11. Immediately, I noticed that the address window has been reduced to about half an inch. The search engine is long, like the address used to be window. It's not good for me. I usually use the address window to make changes and move it to a new page. I can't do it now. How can I make long once again the address window? Can I return to 3.6.22? I need this long window.
    Sincerely,
    Gerald E. Strickland
    Bradenton, Florida

    You can place the mouse between the address bar and the search bar, and it will become an icon of resize.

    Press the left mouse button and drag it to the right to make the larger location toolbar.

    You can also reset the related wides by deleting localstore.rdf in the Firefox profiles folder

  • My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

    My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • My flash drive which was a backup of my system windows has been accidentally immersed in water. When it is dry can still be used without destroying my USB port?

    My flash drive which was a backup of my system windows has been accidentally immersed in water.  When it is dry can still be used without destroying my USB port?

    Hello

    Put it in a bag of rice for a few days or more. -seal the bag.

    If you remove all the moisture, it shouldn't affect the USB ports if nothing is
    possible. Usually it is not a problem if the moisture is removed.

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Explorer Windows has stopped working when you click FLVfile

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

    Hello

    What version of the windows operating system is installed in the computer?

    I suggest you to see link and check. (That applies to windows vista and windows 7)?

    Error: Windows Explorer has stopped working

    http://support.Microsoft.com/kb/2694911

    Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

    Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  • My computer has been slow since last week. Somompany had to issue me a new card. These two things could be connected?

    My computer has been slow since last week. I have tried everything I have Know.My credit card company put a block on my card last Friday because someone stole my crecit card # and charged $1, 900.00.Could these two things be connected? And why my computer is running slowly. Thanks for any help.

    Hi Faye,
    Your computer might be infected with a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
    It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
    Brian
  • Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

    Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

    Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

    I hope this helps...

  • Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

    Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

    Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

    Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

    Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

    Beginning physical memory dump

    Total physical memory dump. Contact technical support for further assistance group.

    Hi fernandomventura,

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

    Step 2: Follow the steps mentioned in the articles below which deals with a similar question

     

    General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

    http://support.Microsoft.com/kb/945658/

    You receive a random "0x0000008E" error message on a blue screen in Windows XP

    http://support.Microsoft.com/kb/827663

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers.

    Download driver printer Epson Stylus CX4800, etc., last nite... today do not have access to the printer... Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers.  What can I do to get this printer permanently replaced on the acceptable list of printers or if I should buy a new printer!  This has been a problem for almost 2 weeks now... What can I do? Every time that you add the printer to the list as soon as I turn off the PC, the printer is removed from the list of Windows! Is this a defect of the windows program I or is this printer is no longer one that windows will recognize?

    Help!

    Hello

    "Every time that you add to the list"

    We do not do anything.

    It is not Microsoft.

    These are public Forums set up by Microsoft on their servers and animated by them.

    We are mainly Windows users help each other here.

    Here is the link to Epson to the latest drivers for your printer model.

    Choose the appropriate operating system from the Menu drop-down.

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=58606&BV_UseBVCookie=Yes&infoType=downloads&platform=OSF_W_VISTA-32

    And a Troubleshooting Guide for it.

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=58606

    See you soon.

  • Progams moved to Windows.old when Windows has been charged.

    My computer was messed up. I rebooted windows with the disc provided by Dell. When windows has been reloaded it moved my Microsoft Office program to a folder named old Windows. Is it possible I can progam office mve to the new Windows program folder without reinstalling Microsoft Office?

    Hello

    None

    I'm sorry but the programs cannot be retrieved from the windows.old folder

    programs need to be reinstalled from the original media

    Windows.Old folder is only to retrieve data

    How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

    http://support.Microsoft.com/kb/932912

  • Why the option "show me other ways to activate" in 'Screen of Activation Windows' has been disabled and grayout outside?

    Hello

    My company PC have installed the version of 7-64 bit window, these computers are not allowed to connect to the internet for security reasons. On other computers phone allows us to make the windows activation. But on a PC, the option "Show me other ways to activate" in 'Screen of Activation Windows' has been disabled and grayed out out. Any suggestion to solve this problem?

    Thanks in advance.
    Allen

    Try this method

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    Activation and registration of a Microsoft product
    http://support.Microsoft.com/?kbid=326851
    Windows activation: (888) 571-2048
    (888) 725-1047 or 800-936-5700

    How to contact a Microsoft Product Activation Center by phone
    http://support.Microsoft.com/kb/950929

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    J W Stuart: http://www.pagestart.com

  • How do I know if my windows has been activated

    I installed my copy of windows 7.i have also received message "your windows has been activated successfully" when I was reviewing. Tell me what are the other ways to know that my windows is genuine and active? Another allows my fraudulantly product key?

    Astrid

    How to tell if Windows is activated?
    http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-Windows-is-activated

    Not so much a do not give it/post to any forum or send it by e-mail. Anyone who uses your computer can also see your product key.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Explorer Windows has stopped working.

    I don't have an error code. Explorer Windows stopped working altogether, and I have no windows on my computer. It started after installing SP 2. for vista. I have an Acer Aspire 5535-5452 and have had problems in the past with updates. I had to recover my computer many times sence buying this computer in 9 / 09. not even 6 months yet and this is not the time to throw. I am not happy with this system or with vista. But my school said I should use this system.

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • How to reinstall iPhoto after his withdrawal?

    Hello world My iPhoto was not able to export a slide show and did not of course sharing photos by e-mail. I read a few posts on the same question and the answer was to remove it and reinstall it in the list to purchase the App. So I put iPhoto to the

  • OSX Server: invisible folder

    Hello For several days I have a strange problem: my shared folder is invisible, but the content is accessible from my network. This folder is located on the main hard drive and does not appear in the FINDER, at the same time, I can find content by us

  • Reading files of multiple data individually

    Hello I made a program that writes data into several files .lvm spectrometer. They are saved in the same folder with sequential names like 'file_001.lvm', 'file_002.lvm', 'file_003.lvm', 'file_004.lvm '... I use the "List Folder.vi" to list them all

  • A problem with this web page caused IE to close and reopen the tab.

    The foregoing is what I get when I try to play my pogo games. Need help to play again.

  • LabVIEW stop when you drag items on the before diagram

    Hi everyone, I met a problem recenty. Whenever I tried to drag or change the size of all the items on the diagram, the labview application will stop and my work is not registered. Do you have any suggestions? Thank you CAMU