Explorer Windows has stopped working when I right click on the files

Similar Questions

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• Explorer Windows has stopped working when you open the folder movies

  Original title: about a week ago my windows Explorer began to close and restart but only when I try to open 1 specific folder... Help

  in the folder my documents, I have a folder called my muvies when I try to access it I get a window that tells windows Explorer has stopped working the TI restarts itself. also, if I try to change how the icons in this folder look same result, but not with anything else. I can access all my other files without problem

  Also, can you check here?

  Start > Control Panel > system and Maintenance > Problem Reports and Solutions > view problem history

  You can right click on some of the mistakes "Stopped working" "Windows Explorer" > view problem details

  What information is given?

• Explorer Windows has stopped working when I try to open a folder

  When I tried to open a file under low load it stopped working. I use windows vista. I don't have windows installation CD because it was pre installed when I bought the laptop. I downloaded windows vista service pack. but the problem still persists. Please help me with solutions

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Explorer Windows has stopped working. (when I open ANY folder)

  any folder, I try to open, (my documents, downloads, photos, C drive, folders on the desktop, my computer, readers Flash and even mp3 players) an update Microsoft security Essentials scan clean and sfc/scannow does not solve the problem, nothing works it is so annoying because I can't to anything that is not on the desktop

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have EVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps: (ran SFC so you also run CheckDisk?)

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• Explorer Windows has stopped working when I click on the start icon

  Gud afternoon, I have 2 problems.

  1 problem is inCD.exe (which i already clear it but sure my window stopped Explorer working Isit because of this problem stop does not work)

  2nd problem is whenever I click on the icon start at the bottom left and right now I move my mouse select the icon Any1... I had to have this word says

  Explorer Windows stopped working

  Explorer Windows restarts...

  And everything is empty unless I keep trying many times.

  It happen since last night until now.

  So far, I only download Call Of Duty: Modern Warfare 2

  ISIT there is Sthing wrong download this game?

  If someone knows how to Slove this... Please help me... Thank you very much

  Hello

  Check to see if the following is useful.

  Step 1: Run the next Fixit and check if it helps.

  Problems with the overall speed of the system and performance

  Step 2: Search for the issue in a clean boot state. To do this, follow these steps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the result of clean boot.

  Step 3: Check out this thread that might have a possible solution to your problem.

  Explorer Windows stopped working

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  I hope this helps.

  Kind regards

  Ramata Thakur.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• My windows Explorer stops working when I try to use the file menu on a file.

  My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) how often does the problem occur?

  Method 1:

  Step 1: You can check if the same problem occurs in safe mode.

  Please follow the link on how to start the computer in SafeMode below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: Choose a date before that the problem occurred as your restore point while performing a system restore.

  WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• When I right click on the files or the desktop icons, the normal menu does not appear

  When I right click on the files or icons on the desktop, the normal menu does not appear, but only the outline of a box.  The menu appears that if I slowly slide my pointer on the box.  Here is the menu starts with open but ends by properties.  All the help and get a fix on this issue, so it appears immediately as it did before?

  Hello

  I suggest that you reset the Visual effects, then check if that helps.

  (a) click Start, click Run, and then type sysdm.cpl

  (b) click on the Advanced tab

  (c) in the course of execution, click settings

  (d) click the Visual Effects tab

  (e) If you have custom settings, note the configuration in a document.

  (f) set it to adjust for best performance

  (g) click on apply

  (h) repeat the above steps and reset your settings favorite again.

• How to fix Explorer Windows has stopped working...

  Afer resolve about a dozen questions, I have all issues resolved, except one, the dreaded "Windows Explorer has stopped working, Windows is checking for a solution to the problem..." "click on in Windows Explorer, of course. On right click, the error message appears, followed by another message error "Windows restart...," then is firm and does not restart?  Since it seems there are a lot of variations or at least several methods to solve the problem, someone the precise solution or know what is the cause of this problem?

  Found this digging in the archives, 2009, by Chief Brody, fixed problem successfully.

  Deactivation of the CEIP Customer Experience Improvement Program

  1. click Start and type gpedit.msc in the search bar or on the command RUN

  2 now navigate to

  Computer configuration-> administrative templates-> system-> Internet Communication management, and then click Internet Communication settings

  

  3 locate Turn off Windows Customer Experience Improvement Program , double click or right click Edit.

  4 click Activate . Apply and Ok and close gpedit window.

  http://www.Blogsdna.com/2137/fix-Windows-Installer-Explorer-update-has-stopped-working-in-Windows-7.htm

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• Why the function "move to new window" that I used to use does not work when I right click on the tab more?

  It was when I right click on the tab in Firefox I could use the option 'Move to the new window'. Now when I go down to this option, it seems it will work, but nothing happens. The other day I changed some options in Firefox, but I don't remember changing anything that sounded as if it would have this effect, and now I can't find all the options that seem to fix. Thanks in advance for any help.

  Hello Beorn, probably the problem is an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you

• Menu 'Open with' do not appear when I right click on the file

  Even if I right click on the file I want to open, the "Open with" menu are not displayed. I wish it would be a way to restore the menu "open with."

  Even if I right click on the file I want to open, the "Open with" menu are not displayed. I wish it would be a way to restore the menu "open with."

  Take a look at this tutorial:
  http://www.Vistax64.com/tutorials/140508-context-menu-enable-disable.html

  Use Option 1: via a download.
  Use the Enable download button.

  t-4-2

• EXPLORER WINDOWS HAS STOPPED WORKING. EXPLORER WINDOWS RESTARTS. RIGHT CLICK

  Have Windows Vista.  When right click on photos, files photo or zip files error message appears: WINDOWS EXPLORER has STOPPED WORKING.  EXPLORER WINDOWS RESTARTS.  This error message also appears when you use the Remove button to delete the photos.  I did a registry cleaner, disk/driver cleaner, catering to a specific date.  I get to the point of confusion when searching for answers.  All opinions on the ShellExView or should I do a clean boot?  Help!

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Explorer Windows has stopped working. Same for the Task Manager.

  I have Windows Vista and have had this computer for several years.

  I tried to work on something yesterday and I found that all my Office 2007 programs would be would break immediately at the opening, while they were working fine a week ago (the last time we used them).  I ran the diagnostic program came not upward with anything and then installed a bunch of windows updates I received automatically.  When the computer restarts now, I get a window in the corner that says 'Custom settings', then a window appears and says that Windows Explorer has stopped working.  I can ctrl/alt/del and open Manager tasks, but when I try to do no matter what to whom, it also stops working.  I not to download anything so I really don't think it is a virus.

  I can't open programs or menus, even if I think I can get a screen of command.  I ran all the tests in the installation disc and did not get any where or the other.

  If anyone can help, I would really appreciate it.

  Thank you

  Mike

  I can show you a workaround until Microsoft fixes their problem.

  As soon as you enter the office hit

  1-CTRL/ALT/DEL to get into the Task Manager
  2. click on the tab Applications (top left corner)
  3. click the new button on the task (lower right corner)
  4. in the Open box, type explore and click the Enter key
  5 do step 3 and 4 once more as quickly as possible

  This should stop the process of recycling the error message

  After stops in the process recycling, you can leave the Task Manager and minimize the Explorer window.  Also, you should be able to leave the Task Manager and windows Explorer now.  If this is not the case, just keep the Explorer minimized window.

  You should now be able to use your computer as usual.

  Let me know how it works for you.  If it works well, spread the word.

• Explorer Windows has stopped working the pop

  When I try to drag or copy and paste appear a folder that the message windows Explorer has stopped working and I can not then action I was trying to do. My laptop is running on Windows 7

  Hello

  This error may be due to one of the following problems:

  • System files on your PC can be corrupted or incompatible with other files
  • You may have an infection of viruses or malware on your PC
  • Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working

  To resolve this issue, try the following solutions:

  1. update your current video driver: update a hardware driver that is not working properly.

  (To make sure you have the latest video driver installed, you can also get in touch with your computer manufacturer and download the latest version of the driver on their part).

  2. run the File Checker (SFC) system to check your files.

  1. Click Start and type cmd in the search box.
  2. In the results, right-click on cmd.exe area, and then click Run as administrator. You may be prompted to type the password for an administrator account.
  3. Click on continue if you are the administrator or type the administrator password, and then click on continue.
  4. At the command prompt, type Sfc/scannow, and then press ENTER.

  Refer to this link for more information on file system checker.

  3 scan your PC for Virus and Malware infections.

  4. perform clean boot to isolate if there is no third-party application or program causes this error.

  5. test the image files that can contain corruption.

  1. Click Start, then click computer
  2. Click on organize, and select folder options and search in the drop-down list
  3. In the Folder Options window, click the view tab
  4. Check the option always show icons, never thumbnails
  5. Remove the control from the option to display the icon of the file on the photos
  6. Click OK to close the Folder Options window

  6. run System Restore.

  If the same product after all the steps mentioned, the next option is a upgrade on site.

  Thank you.