Explorer Windows has stopped working when I try to open a folder
When I tried to open a file under low load it stopped working. I use windows vista. I don't have windows installation CD because it was pre installed when I bought the laptop. I downloaded windows vista service pack. but the problem still persists. Please help me with solutions
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).
----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685
Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html
A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx
There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx
-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html
There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html
Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/
===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.
Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.
Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us
Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125
Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3
Hope these helps.
Tags: Windows
Similar Questions
-
Explorer Windows has stopped working when you click FLVfile
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER
Hello
What version of the windows operating system is installed in the computer?
I suggest you to see link and check. (That applies to windows vista and windows 7)?
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
-
Explorer Windows has stopped working when you open the folder movies
Original title: about a week ago my windows Explorer began to close and restart but only when I try to open 1 specific folder... Help
in the folder my documents, I have a folder called my muvies when I try to access it I get a window that tells windows Explorer has stopped working the TI restarts itself. also, if I try to change how the icons in this folder look same result, but not with anything else. I can access all my other files without problem
Also, can you check here?
Start > Control Panel > system and Maintenance > Problem Reports and Solutions > view problem history
You can right click on some of the mistakes "Stopped working" "Windows Explorer" > view problem details
What information is given?
-
Explorer Windows has stopped working when I right click on the files
When I need to click with the right button on folders, windows Explorer has stopped working.
up to now, still can't use the right click menu ~.Yes, it's the details of the problem.
Unfortunately, it does not identify the failing module.
At this point, it may be useful to try to capture a dump of user of the explorer.exe crash mode.
You can configure Windows to create dumps of user mode. First, create a System Restore Point.
If you copy and paste the following text in Notepad and save it as a .reg file, then right click on the .reg file and select "Merge" to add to the registry, when the .dmp file explorer.exe plant should be created in the C:\CrashDumps folder:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
"DumpFolder" = hex (2): 43, 00, 3A, 00, 5 c 00, 43, 00, 72, 00, 61, 00, 73, 00, 68, 00, 44, 00, 75,.
00, 6 D, 00, 70, 00, 73, 00, 00, 00
After Explorer (explorer.exe) crashes, you can, and then make the .dmp file available (provide the link) via Windows Live SkyDrive or similar site?The following link has information about the use of Windows Live SkyDrive:
More information on the collection of user-mode dumps:
("msdn.microsoft.com/en-us/library··· .a 85)
You can also try to use ShellExView, as suggested by BurrWalnut, to try to eliminate a problematic third-party shell extension.
-
Explorer Windows has stopped working. (when I open ANY folder)
any folder, I try to open, (my documents, downloads, photos, C drive, folders on the desktop, my computer, readers Flash and even mp3 players) an update Microsoft security Essentials scan clean and sfc/scannow does not solve the problem, nothing works it is so annoying because I can't to anything that is not on the desktop
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have EVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps: (ran SFC so you also run CheckDisk?)
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob Brown - MS MVP: Bike - Mark Twain said it right.
-
Explorer Windows has stopped working when I click on the start icon
Gud afternoon, I have 2 problems.
1 problem is inCD.exe (which i already clear it but sure my window stopped Explorer working Isit because of this problem stop does not work)
2nd problem is whenever I click on the icon start at the bottom left and right now I move my mouse select the icon Any1... I had to have this word says
Explorer Windows stopped working
Explorer Windows restarts...
And everything is empty unless I keep trying many times.
It happen since last night until now.
So far, I only download Call Of Duty: Modern Warfare 2
ISIT there is Sthing wrong download this game?
If someone knows how to Slove this... Please help me... Thank you very much
Hello
Check to see if the following is useful.
Step 1: Run the next Fixit and check if it helps.
Problems with the overall speed of the system and performance
Step 2: Search for the issue in a clean boot state. To do this, follow these steps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Let us know the result of clean boot.
Step 3: Check out this thread that might have a possible solution to your problem.
Explorer Windows stopped working
See also:
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance
I hope this helps.
Kind regards
Ramata Thakur.
Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.
-
CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problim
CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problem. He seams to have started when I downloaded the ICC profile
reset your preferences-
Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0
Adobe media encoder: https://forums.adobe.com/thread/1713540
Legacy: http://helpx.adobe.com/after-effects/using/preferences.html
hearing: https://forums.adobe.com/thread/1079494
Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
InCopy: https://forums.adobe.com/thread/526990
InDesign: https://forums.adobe.com/thread/526990
Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
Photoshop: https://forums.adobe.com/thread/375776
Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall
-
Driver.exe has stopped working when you try to play Driver.San Francisco.
I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7
Hello
1. what game do you play?
2. have you made any changes to the computer?
3. this problem occurs only with the particular game?
4. What is the exact error message you received?
Method 1:
I suggest you perform the clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I suggest you to see link and check.
"Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
http://support.Microsoft.com/kb/2665946
See also:
If the problem is related to Microsoft, I suggest you to see link and check.
Game hangs or quits unexpectedly
-
Original title: Windows Vista 32-bit Edition home
Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.
HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.
Nobody knows what's happening with pc or how that I should do to fix this problem. Any help or advice will be
appreciated.
Thank you
EJ
Hello
1. you remember to make changes to the computer before this problem?
Method 1:
If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Put your computer in a clean boot state and then check if the problem persists
Follow step 1 in the link.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3:
The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.
-
How to fix Explorer Windows has stopped working...
Afer resolve about a dozen questions, I have all issues resolved, except one, the dreaded "Windows Explorer has stopped working, Windows is checking for a solution to the problem..." "click on in Windows Explorer, of course. On right click, the error message appears, followed by another message error "Windows restart...," then is firm and does not restart? Since it seems there are a lot of variations or at least several methods to solve the problem, someone the precise solution or know what is the cause of this problem?
Found this digging in the archives, 2009, by Chief Brody, fixed problem successfully.
Deactivation of the CEIP Customer Experience Improvement Program
1. click Start and type gpedit.msc in the search bar or on the command RUN
2 now navigate to
Computer configuration-> administrative templates-> system-> Internet Communication management, and then click Internet Communication settings
3 locate Turn off Windows Customer Experience Improvement Program , double click or right click Edit.
4 click Activate . Apply and Ok and close gpedit window.
http://www.Blogsdna.com/2137/fix-Windows-Installer-Explorer-update-has-stopped-working-in-Windows-7.htm
-
I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.
An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.
Press Win Logo key + R, type: fsmgmt.msc
If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
SE error message "Windows Explorer has stopped working" when you try to search for document files
Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727
When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!
Please help meHello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below and see if it helps.
Error: Windows Explorer has stopped working
Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.
Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.
Hope this information helps.
-
installation of Windows services has stopped working when you try to install the software
Unable to install software.tried cmd method, nothing happens
Original title: installation of windows services has stopped working
Hello Mohit,
Welcome to the Microsoft Community Forums.
I understand that you have a problem with the Windows Installer service.
But I would like to know some more information on this issue to help you better.
(1) what is the full error message?
(2) what software are you trying to install?
(3) have you tried to install any other software?
(4) when you say, "tried cmd method" what exactly mean you?
In the meantime, please try to follow the following suggestions to solve the problem.
Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.
How to fix problems with the Windows service installNote: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.I hope this helps. Otherwise, feel free write us back and we will be happy to help you.
Thank you. -
Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.Please help, I need to uninstall something!---------------------------------------------------------------------Windows host process (Rundll32) has stopped workingSignature of the problem:Problem event name: APPCRASHApplication name: RunDll32.EXEApplication version: 6.1.7600.16385Application timestamp: 4a5bc637Fault Module name: StackHash_9629Fault Module Version: 6.1.7601.17725Timestamp of Module error: 4ec49b8fException code: c0000374Exception offset: 000ce6c3OS version: 6.1.7601.2.1.0.768.3Locale ID: 2057Information additional 1:9629More information 2: 9629b7be96a6d05c3ae74dcb4df31847Information additional 3:2716Additional information 4: 271690c76c60b0182163ae26acc5f429Read our privacy statement online:http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:C:\Windows\system32\en-US\erofflps.txt
Hello
Method 1:
I suggest to set up the computer in a clean boot state, then try to uninstall the software.
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
Method 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
host process for windows services has stopped working a problem caused the program to stop working correctly windows closes
Original title: host process for windows services has stopped working
See if you have rootkits. Run tddskiller, if it finds rootkits, select cure, wait for it to finish and then restart your computer
Maybe you are looking for
-
MacBook is totally insensitive after the installation of Sierra. Is there a solution?
Computer left last night so he was going through installation of Sierra. This morning, it is totally insensitive. Any suggestions to wake up this back?
-
Re: Tecra S10 G11, extremely slow boot after BIOS update to 3.00
My laptop was working fine until I updated the BIOS to 3.00. It takes a lot of time to start all the trunk was support (disk, CDROM,...). Once I have selected the bootable media, the screen goes black with a white blinking cursor for about 5 to 10 mi
-
On the Satellite P30-131 power problem
I have a power problem and I tried the process of elimination, but could do with help, I gave as much detail as possible and appreciate any help or advice. This started a few weeks ago and seems to be deteriorating slowly.I turned on the laptop and a
-
X carbon 1: after open the cover in mode 'sleep' it doesn't wake up
Dear all power option is implemented in sleep when I close the lid and after opening it, he did not wake up. I have to press the power button for 5 seconds about to reboot the system I use windows 8 Help, please... Thanking you in advance Asher
-
Hello. I wonder if a tech-savvy person would be able to recover scans of the internal memory of the all-in-one M276nw? As in, is it possible that confidential info of the analyses could be recovered by the unit once it has been sold, recycled, etc.?