Export Audio stuck encoding at 0%
Hello
We have tried to export a video of 3 minutes for days now with 17 audio tracks full of small sound effects with different effects on (so not able to re-do unfortunately). I managed to export it ok a few days ago and then I made a few minor changes and now it will not encode from 0%. I managed to export just the video so I know that it is the sound. I tried to export by AE, SOUL, and it does not work. I also tried to resume old automatic backup files but for some reason any, that they are doing the same thing.
Any suggestions?
Thank you very much!
Thanks for responding John! After days and hours stressing I finally understand how to solve this problem. Incase anyone else has the same problem (Adobe and the internet have been very useful, and I also had 3 technicians University unable to fix), I thought I would post how I managed.
I managed to export the video just fine, as it was only the audio that is not code or export (despite good rendering on the timeline). The only way I found to make it works, right-click on the sequence in the project Media tab, then open in Adobe Audition. From there on, I exported the entire session. I then imported that back into the first and replaced all of the audio with it. I honestly think that he has no other way if you are facing this problem, and it must be a bug with the latest version of first.
Tags: Premiere
Similar Questions
-
CS4 Pro Export to Media Encoder Audio a, w/out video titles
My sequence is complete and looks a lot like the program playback. I export via Media Encoder and all is well. I have Media Encoder output is superb as well! The encoding takes about three minutes to end successfully. However, when I open the movie, I have sound, titles without video (black screen). I tried many output formats, including quitcktime & h.264, as well as different presets with the same result. That is what it is?
Can you tell us the exact export parameters chosen?
For many formats, you can choose video, Audio or both and can then determine the multiplexing. What's your game of multiplexing to?
A test, you can export to an empty folder and tell us what you end up with in this folder?
Good luck
Hunt
-
Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different files with different after encoding names?
Located in and out on a section and that export brands.
.. .Rinse and repeat for the other section.
Name each section and where it is exported to separately... and as you wish
-
I have a large wav file to finish securities as a mixer and inserted the CD markers where I want the marked pistes. Icon "Are the selected markers to separate the export audio files" is grayed out outside in the markers window. The titles show starts but no end of times, and yet time is calculated. Why can't I export those items marked as separate files?
You must make the markers of track in regions for the Export of work function. Make sure that you have placed a marker at the end of the file, as well as at the beginning of each track. Then select all the markers in the marker list by left clicking the first then shift left click on the last. You can then merge markers in the channels using the comb as icon (3rd from left) at the top of the list of markers. You will then be able to export the lines marked as separate files.
-
First CC 7.2.2 crashes when you try to export via Media Encoder
Hello
My computer is:
2 x Intel Xeon processor E5-2650 (2000 MHz, 20 MB);
16 x Kingston DIMM 8 GB PC3-8500 ECC REG. ;
PNY Quadro 4000 with 2048 MB GDDR5 - RAM;
PNY Tesla C 2075
2 x 2000 GB Western Digital RE4 (7200 UPM/S-ATA II) as a RAID I
1 x 120 GB OCZ Vertex 3 SSD
1 x 240 GB OCZ Vertex 3 SSD (system disk)
Card mother Tyan S7050GM4NR
Windows 7
I recently installed Windows 7 and the CC-Apps PremierePro, After Effects, Media Encoder, Photoshop, and Speedgrade.
When I try to export any video from first to the first Media Encoder crashes without an error message. The problem is not the project: I created several new projects and even if I don't have that one Photoshop file in the scenario that I try to export: first goes down. When I export directly from first it works, but there is no chance to go via media encode. The strange thing is that I can export AfterEffects the encoder to media without any problems...
Does anyone have an idea?
Here is the debug database file that was created:
SOUL. False false EnablePresetDB
SOUL. False false EncoderHost.NoXMP
SOUL. True true UseExportProgressCallback
False false AME.amewrapper.donothide
False false AddDebugClipInfoToTimelineTooltips
False false AddTimestampToLogFileNames
False false AddUTCTimestampToTraces
False false AllowDynamicLinkToOwnProjectType
False false AllowMergedClipsToBeOpenedAsSequences
False false AllowSetPositionDuringPlayback
False false AnalysisDataIsAlwaysCompressed
False false AnalysisDataIsNeverCompressed
ApplicationLanguage en_US en_US
True true BE.CompressProjects
AEM false false DisableCS7RelinkUpdate
AEM EnableNewSerializer true true
False false Bravo.defaultLanguage
CTPreDefinedEncodingType 13 13
CloseAlwaysTimeoutInSeconds 300 300
CloseIfContentionTimeoutInSeconds 15 15
False false CodeProfiler_AutoStart
False false CompareMediaNodeRenderers
False false CreateLogFilesThatDoNotExist
DLG. True true DebugRelinkAsync
GSM Disable10BitSupport false false
GSM DisablePixelFormatShaders false false
GSM ForceCPUOnly false false
False false DVA_syncWindowEnablement
False false DisableGPUMediaNode
False false DisableHighQualityAVCHDPlayback
False false DisableNewMediaNodeRenderer
True true DisableSequenceSettingMasterChannelType
False false DisableSpeculativePrefetching
DistanceFromLastStateToNeedANewMPEGInfo 20 20
False false DumpProject
False false DvaMarshalRPCLogging
False false EnableDogEars
True true EnableGPUDebayer
False false EnableRedGPUDebayer
False false ExporterQT.DNxHDNativeSupportEnabled
FE. True true AudioPluginScanOnFirstLaunch
FE. Fake fake PerformanceLogging
GF. False false DisableAcceleratedDisplay
GF. False false DisableAcceleratedRenderer
GF. True true EnableMultipleGPUs
GF. False false EnableNVIDIAOpenCL
GF. False false ProfileKernels
GF. False false SupportCPUDevices
HandlerProject.HoverScrubDelay 250 250
False false IgnoreDirtyState
True true ImporterMXFEnable
True true LinkLocate.Auto
True true LogTimeInTicks
MC.AudioRenderer.ComplexityBeforeRender 200 200
MC.BE. True true AddDocIDOnImport
ML. fake fake EnableDiskCache
ML. fake fake LoadTestingPluginsAtStartup
ML. fake fake SimulateGrowingFiles
False false MPEGDisableMainConceptIndexing
False false MPEGDisableMultipleOpens
MZ. False false DisableMetadataDatabase
MaxLogSize 0 0
MinimumDelayBetweenFlushesInSeconds 1 1
2 2 Monitor.PlaybackQuality
2 2 Monitor.ScrubbingQuality
4 4 Monitor.StoppedQuality
NumberOfInstancesBeforeContention 5 5
False false Player.EnablePerfomanceStatics
False false EnableQEDOM REM
QT. False false DisableQuickTime32
QT. True true EnableNativeExports
30000 30000 QT32ServerManager.StartupTimeout
False false REDRocketCompletelyDisabled
REDRocketMaximumNumberOfCardsToUse 0 0
False false ShowExperimentalEffectParameters
False false SuppressPeakFileGeneration
False false TimeWarpFilterEnabled
False false TraceAsync
TraceSyslog
True true WindowMediaPARApproximation
False false Assert.Enabled
Hi Mark,
Thanks for your reply. Without having changed anything, he works all of a sudden... I got the block all day and now it works.
Thanks for your response, best regards
Wolfram Wagner
-
How to export audio from Flash?
Really. How do you export audio in Flash? This is a regular problem, I have to work. There is audio which has need of a word or a sentence out. I'm used to be able to select the audio file from the library, and then export.
None of these export options work. We were re-recording audio to adapt to changes, but honestly, it's ridiculous.
I don't need anything fancy - just the export audio mp3.
Someone knows a way to do this?
Thank you
Elaine
Dam it's in 2012, lol its 2015
put the audio in a video separated, and then drag on the stage
-
Export Audio (.wav) of my file animate
Hello
I can't figure out how to export just a file audio (.wav) file of the animation (animate file) I build. The reason why I want to do it is because I have several different compiled .wav files in my file animate and I want to export the file, I work in a single .wav file.
Your help is appreciated!
Thank you
Christina
Yes, of course!
Basically, you export video as I said, and then once this file opens in Media Encoder, you select the menu drop-down he... In my example it is H264... change now in AIFF, rendering click (the green play button) and you're golden!
-
Export audio clips of several scenes for mixer
Is there a quick way for each export to put on a hard drive of all individual (like saying stage 1A, 2A scene) audio clips so that it is available for my sound engineer?
If you have them all in a pan and the duration, drag all the files from the location in Media Encoder and a WAV or AIFF preset of your choice or creation. If you then select all in the SOUL, you can change the destination of the output file.
-
Export video to encode locks of the first place for any purpose
I'm new on creation and Media Encoder, but for the last two days, I tried several times to edit a video in first and export the video ready via the 'Tail' of encoder option. The big problem comes at the end of the process, where the status bar continues to say, "remaining: 00:00:01 ' and never changes, even if I leave it alone until half an hour. As a result, I am unable to do anything with my video ready. Can anyone offer advice on how to fix this?
Some video exports require multiplexing. Basically, import video and audio and they are separated and at the end they get multiplex back together. for some formats, this happens at the end of the export and it may seem that the encoding is frozen at the end, but multiplexing is underway. We are in the process of adding the progress bar for these special cases. Maybe that's what you see. Keep track of how long takes encodes it, if it takes 30 minutes, let it stay there at the end for another 30 minutes or even an hour see if encoding finally ends.
Another thing you can do is to export to other formats, and the screening and see if that ends. Please let us know what export preset works and what is suspended at the end.
-
Export audio to the third audio editor
I searched the archives to try to find relevant articles about it, but all I could find were articles published in 2012 in the aftermath of the FCP - X was introduced. I know at the time, Apple was pretty well rooted out FCP all export capabilities that were in FCP 7 for the purpose of export the titles so they can be translated in a third-party audio editor (such as Pro Tools or Adobe Audition) to water down the audio.
Now, I suspect that this feature is in FCP - X in the form of export > XML option in the file menu.
But I wonder if anyone is familiar with this operation could me step through it. I'm eager to bring discrete tracks (i.e., "storylines attached") within the PCF - X in a third-party audio editor. I usually use Pro Tools to a job like this. But I also plead for a friend, and he uses Adobe Audition. Neither one of us is a fan of Logic Pro. (I have it, but my eyes glaze every time that I try to give a sense).
Anyone here knows how this is done when you go to Pro Tools or Adobe Audition?
Thanks in advance.
You must look in X2Pro, which is a conversion utility that will bring the CML FCP to ProTools.
-
Try to save all photos via export but stuck download
I tried to download my entire library (using export), but it gets stuck every time with 2 remaining files. So 24 k + downloaded stands out. My guess is that there are two files that are corrupt side iCloud... I know how to find the files corrupt on the Mac side, but how do I find these files two problem with Cloud?
Try to export your library in small portions. First of all try to export in the first half.
- If this is successful, you will know that the problematic files are in the second half. Then try to export some of the pictures in the second half.
- If this fails, try to export the second half of the photos, which should be okay. Now split the first half of the pictures and try to export half.
- Keep dividing all of the photos in the half, until you have isolated the problematic pictures. Divide all of the photos in small series can quickly isolate the problematic pictures. With the divide and conquer method, you can isolate corrupted between 1000000 photos with split only 20 times photo.
-
Audio stuck on Digital Out when Windows starts
I just finished to install 10 Windows on my Macbook Pro retina mid-2015, and whenever I start Windows, audio is stuck on the digital output. I tried to remove Realtek and reinstall it, but no go.
You can perform the following two procedures
Reset the management system (SCM) controller on your Mac - Apple Support
How to reset the NVRAM on your Mac - Apple Support
and test?
-
Audio stuck all playing without stop-Windows 7
Hello
I have a dell inspiron 1545 laptop, running on version Home premium to Windows 7. Recently, I re-installed the windows by using the backup utility dell to the factory settings and after that, my audio started stuck while playing music (audio feels like the computer hangs). I tried to update the IDT audio driver by using Device Manager, but says that the driver is up-to-date. I tried to uninstall and reinstall the driver but no use. Will this be the problem of my audio driver or hardware problems. Please suggest something that I can fix this...
Hello, Annick,.
Thanks for posting your question on the forum of the Microsoft community.
I would like to know some information about the problem so that we can help you better.
You did the hardware changes to your computer recently?
Make sure that your speakers are properly connected to your computer.
Many computers have taken three or more who connect to a sound card or sound processor, including a jack for microphone, line-in jack and line-out. Your speakers should be plugged into the line-out socket. If you don't know what it is, try plugging your speakers to each of the jacks to see if any of them produce the sound.
In some cases, you can work around the problem by disabling optional speaker effects that are known as improvements. If the disabling effects speaker resolves the problem, you may need to update your audio driver.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the troubleshooting of Audio playback
Reference:
Open the troubleshooting of Audio playback
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-TroubleshooterIf this does not help, then use method 2.
Method 2:
Please use the suggestions contained in this help article and check the issue.
Reference:
How can I stop my music skip or break down when I play?
http://Windows.Microsoft.com/en-us/Windows/stop-music-skipping-breaking#1TC=Windows-7In addition, Please update the latest audio drivers from this link:
http://www.Dell.com/support/drivers/us/en/04/product/Inspiron-15Additional information:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7I hope this information helps.
Please let us know if you need more help.
Thank you
-
Export audio comes form a nested timeline
Is there a simpler way to do what I do?
Below is a description on how I made audio for season one of the pets in Paradise TV for international distribution according to my syndication partner.
Please let me know if there is an easier way to do this process.
I figured this out on my own little and made patterns in the model for it, but I wonder if there is a better way. Sorry about the long explanation, please let me know how I can explain more clearly if necessary.
Here is what I do
21:30 show consists of 4 segments nested in a master chronology for export.
All segments 4 chronologies are audio multitrack with 12 tracks is a master track 4 channels.
Tracks 1 and 2 are for the narration, routed to channel master 1 & 2
3 12 thru tracks are dialogue, music and effects sound, routed to channel master 1,2,3,4
In this way the main timeline (chronology with the 4 segment in nested timelines) has 2 stereo channels, tracks 1 & 2 mixed, tracks 3 & 4 mixed less narration. This method works.
I hope there is an easier way of the below
Exporters stems form the main timeline.
Because the main timeline has 4 timelines embedded in it, I can export only the audio mixed master 4 tracks. I need to export one stereo stem for each audio clip (Narration, dialog, music, effects, mixed, mixed, without narration, narrative only) for the duration of 21:30. To do this, I make a duplicate control the timeline and name it Audio stems. Then I go in each segment of chronology and copy the audio channels. Then paste it into the chronology of Audio stem and make sure it's sync with the audio master of this segment. I do this with all 4 segments until the 21:30 Audio stem chronology is complete and in harmony.
Then I export a track at a time. It gives me a 21:30 audio stem that synchronizes upward with the master export.
I wish I could just export the individual tracks of nested master chronology.
If someone knows a way easier please let me know, otherwise I'll continue with the process described above, it dose work.
Muffler or solo audio channels on the nested sequence, then export the master works, thank YOU
-
Export Audio OMF and XML files
Hey there,
We should be able to export OMF Audio files for editing in Pro Tools and also to export XML files to facilitate the color calibration. These options are available in the elements?
Thanks in advance
Laughing out loud
Maybe you are looking for
-
Satellite P10 554: I want to replace my carpet ODD-Drive * a UJ-811
Hello everyone, I want to replace my carpet ODD-Drive * a UJ-811. My question: is this master drive or balm or cabelselect und is compatible with the Slim NEC AD - 7540A?Thanks for the reply
-
Has anyone ever used a Hall sensor to measure the speed of the engine and crank angle? I'm trying to understand how to measure the lunatics of angle of a single cylinder engine using any data acquisition system. I just need to know what settings or V
-
HI guys,. I am facing a problem: I want to create a trace that shows me a car and a bus moving according to the data I receive telemetry. So, I would like to know if you guys can help me with that. What type of chart should I use? How can I call a (c
-
Windows 10 with photo software?
Since I've upgraded to Windows 10, my HP Mediasmart Photo software is "incompatible". How to solve this? Thank you Carrie
-
Pavilion: try to install my printer for laptop HP with Windows 8
Hello I am trying to install my printer HP photosmart c4180 to my laptop HP Pavillion (Windows 8 not sure if 32 or 64 bit). I downloaded the software but when I try to install my printer on my laptop via a USB cable, I get an error troubleshooting.