Export failed: file not found (<; path of the VM folder >; \autoinst.flp).
I'm trying to export server Ubuntu LTS 64 14.04 OVF format and I get the following error:
Export failed: file not found (< path of the VM folder > \autoinst.flp).
It works for my other OS as well as Ubuntu LTS Desktop 14.04. I have a 10 Workstation on a windows machine 7 and 11 of the workstation with the latest patch on 14 Ubuntu LTS Desktop and get the same error when you try to export the specific operating system.
I solved this problem myself. The original virtual machine had its hardware settings pointing to autoinst.iso. She does not have this file and when I ran the error did not prevent the virtual machine to boot the system. I cloned VM and the setting of the material had the floppy pointing to autoinst.flp. I removed this material setting and now I can create an OVF file for it.
Help please!I have the exact problem described below, but do not have a folder with the same name as the volume created on the volume. Please can anyone help - I have tried everything. This problem happened when I upgraded to Fireworks CC!
This problem has been resolved by renaming current Martin of the Volume of work. The reason to get the "file not found" error in the case of Martin is because there is a folder inside the current workload that has the same name as the Volume itself (the name of the "system" folder. Please refer to the screenshot above).
@cabolivar, can you please check if you have any folder in your root folder which has the same name as the name of current workload? If it's confusing, please post a screenshot as Martin. Try out us and solve it for you.
I'm in developer edition Coldfusion9 on Ubuntu 10.10 x 64. I followed the tutorial found here. So far, I was able to do everything with the exception of the visualization of my pages in the browser. When I try to view the page, it gives me the error shown below.
I have been using cfEclipse to build pages and I followed the instructions as much as I can, the difference is that I replaced the paths of Linux for windows those.
Thanks in advance
Error occurred while processing request
File not found: /home/forrest/workspace/Learning/Gallery.cfc
- Check the ColdFusion documentation to verify that you are using the correct syntax.
- Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/5.0 (X 11; U; Linux x86_64; en-US; RV:22.214.171.124) Gecko Remote address 0:0:0:0:0:0:0:1 Referrer Date/time October 11, 10 10:44 Stack trace
coldfusion.runtime.TemplateNotFoundException: File not found: /home/forrest/workspace/Learning/Gallery.cfc at coldfusion.filter.PathFilter.invoke(PathFilter.java:90) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:138) at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:264) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
@David thanks of Watts for the help that I tried to change the port to 8300 that does not work. That makes sense, I think because I have to go to 'http://Mypc:8500 / etc. in order to get to the CF administrator.
This means that content in the/opt/coldfusion9/wwwroot/directory will be served to the top by the url http://Mypc:8500 /.
I.e. /opt/coldfusion/wwwroot/myFirstColdFusion.cfm == http://mypc:8500 / myFirstColdFusion.cfm
Unless you did something to the underscore configeration to change this behavior.
Hello support team,
Lenovo Onekey Theather File Not found error, when we try to download it.
Lenovo Onekey Theater
Problem solved thanks
I wrote a little VI (my first!) to send a string to a DLL that has written:
Our DLL exports two functions, DACQInputMsg() and DACQOutputMsg(), who receive and output channels, respectively. DACQ.dll also called PIDebug.dll, which we use to write debug information to the Windows debug stream.
The DACQ.dll and the PIDebug.dll live in C:\Program Files\Pulse20\
The VI _always_ complains when I load first, that PIDebug.dll could not load, and the VI is not executable. If I change the library function call, I see that the path I had entered as C:\Program Files\Pulse20\dacq.dll has been replaced by...... \dacq.dll. If I just retype as C:\Program Files\Pulse20\dacq.dll and click OK, it still is unexecutable. But if I then click Browse (which opens C:\Program Files\Pulse20\) and then click OK, then everything works.
But if I save it, close LabVIEW and run it again, I have to start all over again.
Note that I have by clicking Browse does not change what LabVIEW sees as the path to the DLL. It seems just "wakes up" something and actually load the DLL (and possibly the DLL depends on it?). The actual function call, calling convention, and the arguments are correct because everything works after I re - specify and re - browse to the DLL.
Yes, we use LabVIEW 5.1. If I can get some things fixed and complete this proof of concept, then maybe I can get approval to upgrade!
Sorry for the Kipper, it was PEBCAK. Put C:\Program Files\Pulse20 in the Windows environment variables corrects the problem.
Sorry to bother you.
Firefox 9.0.1 gives file not found for all the recipes on BBC.co.uk, either on this site or on Google, even in safe mode, although IE and Firefox earlier has
Firefox in version 9.0.1
Problem started with the latest Firefox
IE 8 support revenue very well from the food of BBC, or Google page
Try to clear the browser cache, if it fails to remove all cookies on the sites of the BBC. If you still have problems provide examples of specific recipes from BBC with the url that you are unable to link to Firefox 9.
Working on jdev 126.96.36.199.0, ADF BC with Rich faces.
I download the file from the network file system, I am successfully the integrated download weblogic Server file, the application even when I'm running with my managed server (DEV server), I get the error message like
# < 10 August 2010 23:39:02 CEST > < opinion > < Stdout > < sunt2000 - 10.wfs.com > < wld1_ms1 > < ExecuteThread [ASSET]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > < 21291a4e37aed913:-38a2f9a1:12a5d38d756: - 8000-0000000000000275 > < 1281476342286 > < BEA-000000 > < downloadLetters file name*://bwi-wfp-v01/Apps/SCII/TEST/LOG/Cards/ONDEMAND/Xyz.doc* >
# < 10 August 2010 23:39:02 CEST > < opinion > < Stdout > < sunt2000 - 10.wfs.com > < wld1_ms1 > < ExecuteThread [ASSET]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > < 21291a4e37aed913:-38a2f9a1:12a5d38d756: - 8000-0000000000000276 > < 1281476342313 > < BEA-000000 > < < 10 August 2010 23:39:02 CEST > < WARNING > < org.apache.myfaces.trinidadinternal.taglib.listener.FileDownloadActionListener > < BEA-000000 > <
javax.el.ELException: java.io.FileNotFoundException: */bwi-wfp-v01/Apps/SCII/TEST/LOG/Cards/ONDEMAND/Xyz.doc* (no such file or directory)
my file location is://bwi-wfp-v01/Apps/SCII/TEST/LOG/Cards/ONDEMAND/Xyz.doc, I am getting the correct location of the file during playback in the managed bean, but the error is showing that /bwi-wfp-v01/Apps/SCII/TEST/LOG/Cards/ONDEMAND/Xyz.doc one / is missing, why what is happening in the managed server.
Can someone help me, what is in this case.
What comes to mind, is that the managed server is unable to access a network file system.
The server is running under the same operating system?
Could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:
Help, please. I copied this over from a backup and it does not open. I joined the collection of support...
Thank you very much!
it2webber wrote: could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:
Help, please. I copied this over from a backup and it does not open.
How the Virtual Machine has been backed up and restored? If Time Machine then...
It is a known fact that Time Machine is not 100% reliable backing up/restoring VMS in all circumstances/conditions. Also back up Virtual Machines via Time Machine of disk/time intensive and wastes a lot of space for something that may be corrupted and worthless time to restore it. At least I would exclude the Virtual Machines with virtual machines and Time Machine shutdown, not suspended and VMware Fusion closed and then manually copy the VMS to another location, preferably on a different physical hard drive. So keep the user data stored in the virtual machine saved out of the Virtual Machine on a regular basis in order to always have a backup of the current user data. If you need to restore a properly saved by VM is not as common at least you will have a virtual working Machine and data user to go forward with when you find out your Time Machine backup of the virtual machine fails. Also take a look at: best practices for backup of virtual machine (programs and data) in VMware Fusion (1013628)
That said, if you don't have a copy of the file "Windows 7 - f004.vmdk" and then to try to retrieve the data from the user, you can try the following:
Download then unzip it (double-click on) the joint "Windows_7 - f004.vmdk.zip" file that contains the file "Windows 7 - f004.vmdk ' an empty logical binary measure that has been created on the metric of the existing drive and add to the Package of the Virtual Machine. This should allow the VHD to be considered as a virtual hard drive, assuming that there is no damage to the extent of the binary left headers. Take a look on: work with Virtual Machine packages
At this point, that the VHD has the scope necessary to show as a full disk, assuming that it is not corrupt the header in other binary extensions and can now attempt to access for the recovery of user data.
There are several ways to try to retrieve user data. The easy, although not necessarily work properly according to what now lack us due to replace the missing binary extensions with a logical empty measure, is trying to start the VM normally. If the virtual machine starts up on the desk and VMware Tools load properly you should be able to copy your data to user off on a USB or slip and fall on the side of Mac or if you have a configured VMware folder then copy the files through it.
Other methods involve starting the Virtual Machine with a Live OS ISO Image and copy files from a USB key or temporarily assemble the VHD to another Virtual Machine work.
With the right tools installed the virtual hard disk could also be mounted as another accessible Volume through Finder.
Original title: oleaut32.dll xp
My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
However, I can't in the operating system to do a re-install.
If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:
Lsass.exe - Unable to locate component
This application has failed to start because the OLEAUT32.dll file not found. Reinstalling the application may fix this problem.
If the missing file is the only problem, you might have to do a reinstall to fix.
There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.
Once started in the XP Recovery Console, you must enter this command at the prompt:
Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32
If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:
Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32
Answered in the affirmative if invited to replace any existing file.
I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you. I think that the MSE is just throw a few things to try and some links. You don't describe symptoms consistent with the need to use one of these methods. I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.
If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).
Boot into the Recovery Console Windows using an XP bootable installation CD.
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
Download the ISO from here:
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
When you install ImgBurn, DO NOT install the Ask toolbar.
Here are some instructions for ImgBurn:
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
I can't build a blu - ray of my film image with yet. I get the error after some time after starting to build:
Blu-ray Object : "MASTER/MASTER.prproj", export file not found
Where the MASTER is the name of the sequence.
Here's what I did:
1. under the direction of the film in Premiere Pro in six projects of each length ~ 30 minutes (this was because the project got too big with all that in one project)
2 imported all of six projects in a large.
2. exported it to still with Dynamic Link
3. making menus in Encore
4. construction of a Blu - Ray image
Everything worked as expected until I started to build the iso again. I tried to redo the project twice now, but without success. I get the same error every time.
Little help is very appreciated because I spent a lot of time editing this movie now, and I would really like to see the end result on a blu - ray disc
Please let know me if you need additional info on how I did things, or anything else. Thanks in advance.
I wonder if I can do the first rendering instead of export to everything first? And then import the file in again.
Yes. This is the way that the folk do much. You will need to do a little bit-budgeting (this could be a good term for Google and read on), but you will create a DVD/BD-compatible MPEG-2 (or MP2 H.264 for the comic) and this will be imported in en as a timeline.
I can't access some websites using Firefox. Pages say "File not found" or in the case of Yahoo and Facebook, they resemble the on-screen text files. No problems with my computer and it is not the case with my browsers IE and Chrome. Already deleted and reinstalled Firefox and it has not solved the problem
You can also do a check of malware with some digitization programs of malicious software on the Windows computer.
Please scan with all programs, because each program detects a different malicious program.
All of these programs have free versions.
Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
- Microsoft security scanner:
- Windows Defender: Home Page:
- Spybot Search & Destroy:
- Kasperky free Security Scan:
Alternatively, you can write a check for an infection rootkit TDSSKiller.
- Utility anti-rootkit TDSSKiller:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
- Malwarebytes' Anti-Malware:
I've written a dll that has a number of panels in a .uir file.
When I have it, debug using "debug SeqEdit.exe", everything works fine.
But, if I just use "run SeqEdit.exe" (without debugging and using the same sequence file, I get the error message:)
"Error in the call to LoadPanel.
Handle of parent of Panel: 0,
The IUR filename: HiPot.uir.
Resource Panel ID: 4.
File not found. "
The IUR file is always in the same place, the only difference is that I do not use the debug option.
It's probably something simple I've forgotten?
You should not use LoadPanelEx in this case?
Apparently there is no way of contacting Adobe on a problem - at least by telephone, dear to the United Kingdom.
Cannot download my files to the cloud, even if they appear in my account. error message says 'file not found' regardless of the file - new or used.
Any help would be grateful.
Welcome to the Adobe Forum!
There is a planned maintenanace announced as directed by the Adobe customer service.
Please go through this:http://forums.adobe.com/message/6004766#6004766
You can visiti this page also:
Hope this helps you.
I used autorun and I see there are a lot of entries that say file not found. Should I remove them? It would make my computer run better? IAM using xp home edition. Thank you!
No! You need to search these entries carefully before deleting an any of them, file not found does not necessarily mean what he says, it's how and where the Autoruns seeks the path of the image that causes these entries 'file not found '. Read the FAQ on the SysInternals site: http://forum.sysinternals.com/topic4719.html
My 5610 on Windows 7 64 bit don't scan, so uninstalled the Solution Center and printer and tried to reinstall the driver and software. It fails by giving a file not found error for the following file:
How can I fix?
No, it's not worth it and the new printer is already installed and working properly. It took about an hour or less of closed box to operational.
Besides, why would I need two printers that have the same functionality on the same computer.
Maybe you are looking for
New (1 month) P7 - 1446 s Desktop PC (bought at Office Max). Looking for * provided by HP * recovery... media not those I can do for me (I understand HP for years, I assume all responsibility for discs and how / if they work). I want that the disks
the min and MAX values maintain their good values tia sal22 Hi all I have problems a little value to stay in their correct min and max values min and max.Continue to change their values (up and down) trying to get the max value to only display the ma
Hello I have corrected exercises training on Labview (free). Thank you
I complete the same program I write it and when I run it to another computer it works fine, but for mine it cannot work I want to know what problems does my pc has or something wrong in the settings?
need to activate my copy of windows 7, where it is on the computer?