Export project

Hello dear members,

I did a film for a long while on the first Elements.I finished it today and the total duration of it is 01:10:58 minutes. Yes, a lot, I know.

After finishing to do, I pressed Enter and made it all. Now, the last thing I need to do is to export it. I want to be able to put the movie on a disc, and in the properties to export I have no way to do so, but in the usual way, that is going to give me almost 14 GB weight.

Did anyone know what I can do so I'll be able to export my movie in a normal weight, so I can put it on a disc?

Thank you very much

Rotem

You don't say what version of the program that you are using. But, assuming you are using version 7, go to share and choose the option to export it to a disk.

Your video must fit on a standard DVD.

You can also add menus if you wish.

Tags: Premiere

Similar Questions

  • After the export project from FCPX thud in QuickTime

    Hello

    I have looked for a solution all over but can't find any solution. I really hope someone here can help me.

    I have produced a song myself and now want to add some video clips and then send the final product on YouTube. The music file I imported to FCPX is 48 kHz, 16 bit Wav. Everthing sounds good in the FCPX scenario. In addition, the music file sounds good in iTunes.

    The problem occurs when the final product is exported from FCPX. After export, the sound becomes deaf. Other things also happens to the song. For example: in the intro, I have a trap of working capital. At the end of each measurement, I a harder drum hit. When that hit the drum, the volume of the snare is declining. What is happening not in iTunes. This destroys the sound and is a bit frustrating.

    I tried to export with all the different parameters, that I can find. The same issue occur in iMovie.

    The noise level is not above 0 dB and are never in the Red tip in FCPX.

    I also tried to put the level-12 dB and export the project. Subsequently, the overall volume is too low and the problem persist.

    Hope someone out there have a solution.

    (Sorry for the bad English)

    Kind regards

    Jonas

    Could you post a piece of the original file somewhere?

  • Windows Movie Maker - Audio only, which plays in the exported project

    Hello.

    I did a project in windows movie maker with video and audio files. Project perfect cheek (the two audio/video playback) in windows movie maker when I am in the phase "creation/editing. When I export it and save the project as a. MP4 or. WMV file and try to play in Windows Media Player, Quicktime or VLC, as the audio of my theatre project. There is no video. However, when I play the other. MP4 files or. WMV files via these media players, they play very well. So I think that the problem is with the export of the Movie Maker project. Also, thinking that I have perhaps incompatible video files to Windows Movie Maker, I tried just using Jpeg files with audio to create a slide show, thinking that it would work with standard Habitat. Yet once, however, that the audio is played with a project containing pictures (no video). Any ideas?

    Audio was working fine, just no photos or video showing once the project has been saved as a movie. So, I tried your solution of creating a short slide show with photos only and no luck. I uninstalled and reinstalled movie maker and still no luck. Downloaded the pack codek for windows 7 and still no luck.

    So, I decided to download the Vista windows movie maker for my OS to windows 7 and everything works like a charm. Don't know how or why, but the version of Vista is flawless on my windows 7.

    Thanks for your suggestions. I appreciate the help.

  • Crunches and appears when exporting project cs5.5 to mp4

    I've finished a big project in cs5.5 and it sounds good in the timeline panel. When I export to mp4 I have crackling and pop throughout the 16 minute video. I work on a mac pro with os x el capitan. Seems to be a new issue. I never noticed this with previous projects.

    Kevin and Sean thanks for your help.

    After working with that some more I found that it comes and goes. I noticed that I can find a crack in the mp4 and then return to the top of my head to play at this same point, press play and the Crackle is gone. I think it's a matter of computer processor? Although it surprises me because I have a mac pro robust enough. It also seems that it helps to use media encoder rather than export them to the media since the project window.

    I'll clean the cache and delete the preview like Sean suggested. It's probably a good practice regardless. (Thanks Sean)

    Pat

  • How can I export projects, including securities, in Final Cut Pro XML format?

    When I export a Premiere Pro project in Final Cut Pro XML, I get the error message:Article synthetic (Martin Luther King) translated not, Slug is used as a placeholder.

    Graphs created with the title of the first have no equivalent XML language/control that would be compatible with Final Cut.

    Your best bet is to recreate all titles in Final Cut, or replace all the titles of the first with the Photoshop files that can then be used in Final Cut

  • Export project HD of CS4 - assistance needed!

    I could use some tips working my way out of what looks like a delicate situation. Partially because I'm not very experienced with video production (espcially export), but also because I was a punk and broke this cardinal rule not to move to HD before you know what you're doing. And so wedidng video cousin took more time to mount and export the author a DVD than expected...

    It's a big mess to untangle, so if anyone can offer advice, I'd be happy.

    I edited with Premiere CS4. The problem is that I can't figure out how to export images in such a way that 1) fills a widescreen tv completely and 2) is actually great quality, I think.

    A few details:

    (1) export in a format screen wide (my preferred export setting is H.264) during playback of the DVD on a TV big screen, it plays on the big screen, but there is a beautiful large black border around the whole image - it is not just to fill the entire screen. On a TV not screen, it does not appear correctly Letterbox and looks very closely a 4:3 ratio. You can see the difference between the menu of the DVD Letterbox widescreen and the much thinner black "Letterbox" of the wedding video. How can I fix?

    2)

    The quality is not HD as I expected, and it seems that during the first edition. In fact, sometimes it doesn't even seem as good as the quality of SD, especially when there is movement in the frame and in the follow-up of movement. I shot with two different cameras I borrowed from different people. A camera shot in 1440 x 1080 and a glance at 1920 x 1080. I didn't know this until I was shooting the footage for editing. I do know that if it has nothing to do with the export quality - both look about the same in the first when editing. When you watch the video exported, it does support any motion in the framework of all - blurry motion is in all directions. It does not at first. I wonder if it's because I should deinterlace pictures? I don't know if my camera records in 1080i or 1080 p (and have no idea how understand this). Or should I try to transform the images of 1440 square pixels to correct proportions?

    I have read a few forum posts and wonder if the problem is that CS4 can't export images HD for DVD standard bat. I thought that if the size of the file ends up being small enough to fit on a standard DVD, it would work very well. I exported. Maybe that's the problem with the quality of the movie? In this case, what suggestions are there to learn how to export?

    Essentially, I could use some suggestions on how to export these images in a format that plays on the widescreen or proportions standard (I'm game for anything that will provide the best quality of image at this point, even if I lose the sides of my images, conversion to 4:3). Or do I need to make some changes before going even to export?

    Thanks for your thoughts. And Yes, I am so incredibly, fully aware of the madness to move towards a format I know aboslutely zilch. In fact, I had this thought when I was preparing film marriage - meh, I had no trouble before real with any of my video projects, I have to try HD one day! UHG!

    Thank you

    Heather

    If you PLAY your DVD on a standard DVD player, attached to a TV, you won't get HD quality DVD is, by definition, 720 x 480 (US... PAL standard is different)

    Export from body as MPEG2 - DVD Widescreen and give the two files (audio and video) to even the author of the DVD

    If you play the DVD on a BluRay player, there is a way to 'about' 20 minutes of HD video on a DVD... but who will NOT play on a standard DVD, only a BluRay drive

    Comparison of video screen photo sizes http://forums.adobe.com/thread/1120039

    ADDED - Image on a http://forums.adobe.com/thread/871854 DVD BluRay

  • Migration of export project

    Hello

    is it possible to export a migration project?

    Best regards
    Tareq

    Hi Tariq,

    Unfortunately there is no option to export a Migration project currently. In the meantime, you have access to your objects in schema of database data migrated (preferably in the form of DDL script) and also all migration files necessary for example for a Migration from MS Access, this would be a script SQL, for example Northwind.sql and for a conversion of Oracle Forms, it would of the XML files for the libraries of Menus/Modules/object of forms and reports Oracle and LDP convert PLL , then you can easily re - create the Migration project in a different workspace. I appreciate that the selections that you make in the Migration project may not be exported, then we could look at possibly address this in a future release.

    Kind regards
    Hilary

  • JSFF fragments for reuseing in several export projects

    Hello

    I have created a few pages jsff and used in the current project.

    Since these are fragments of the page, I should be able to reuse these pages in other projects.

    Unfortunately, the jsff pages have backing_beans and other parameters attached with it.

    Y at - it a good way to export jsff pages from one project to another, as well as its dependencies.

    No work around...


    Thank you and best regards,
    Amit

    Create a library of declarative components?

    http://technology.AMIS.nl/Blog/2562/JDeveloper-11g-declarative-components-rapid-no-programming-composition-of-custom-JSF-components

    http://Groundside.com/blog/GrantRonald.php?title=reusability_in_jdeveloper_and_adf_declar&more=1&c=1&TB=1&pb=1

  • Export projects to author iBooks for example files in the .epub format

    I keep reading in Apple items that I can export iBooks author as .epub files, however I have not found export options in the app or explained in the Apple support. I need the .epub and .epub3 format files.

    In order to export it as .epub, you must dial the book using one of the templates specifically marked for .epub provided in iBA.  Other models can be exported in the format .ibooks.

  • The highest quality DVD export project

    I couldn't find anything about whether the search through the messages of the forum... so I apologize if this question has already been addressed.

    I'm relatively new to FCPX, although I learned a LOT of things in the last 6 months. However, I'm not sure how to export to DVD using the best possible resolution/format. I'm looking to get the recommendations of the community who have a lot of experience with the software. I recorded content in 1080 p, but the DVD seems to be enough 'grainy' to me (export to 720 x 480 / 29.97 FPS). My content may last for 1 to 2 hours long, and I understand that this may require me to use 2 DVD's... which is good.

    No matter which recommended export configurations?

    Also, should I do all apple software additional to use in conjunction with FCPX?

    Thank you!

    CPF automatically selects the baud rate that will allow the video to fit on the disc. You can get better results if you use a disc double layer. But remember that if you're working with HD or higher, the quality will certainly deteriorate when compressed in MPEG2 SD. You can also consider Blu Ray of much better quality.

    Good luck.

    Russ

  • StarUML import/export projects LabVIEW?

    Hello

    I am aware of the free plugin that requires G # (StarUML G # plug - in), but is there a way to interface "vanilla LVOOP" projects with StarUML, or any other tool for UML modeling also?

    'Everyone a MOM, I want it too'

    Late response, but the G # StarUML plugin can generate pure LVOOP. When you generate the code, you simply select the template of LVNative.

  • Exported project plays fine on windows but unstable on mac?

    For my bachelor's degree courses, I edited my last piece on Adobe Premiere Pro on a Windows computer at my school. However, at home, I work on a Mac (I unfortunately do not have Adobe or so I just re - edit). When it comes to reading the file exported .mp4 on my mac it is nervous/restless and virtually unwatchable, but computer at school, that's fine. I don't know if the length of the movie has nothing to do with it, as the problem/unstable file is long 30 minutes, however, another piece I've edited and exported which is only 3mins long plays very well on windows and mac?

    Really at a loss here, as I exported it in several different file formats to try to see if it solves the problem, but in vain.

    Would really appreciate if someone could help me because all my work is about to be deleted and I need a copy of this before!

    Thank you very much.

    Jazz

    Hi Jasmine,.

    Checked it with some other media player like VLC?

    Kind regards

    Navdeep Pandey

  • Not available in Premier Pro after the export project AE direct text templates

    Hi team

    I tried to create a few lower third models in AE to use in first pro more later. To speed up the process, I downloaded a few models of a site, but unfortunately after a few minor changes to the export of the AE file does not seem to support models of living text of Premier Pro so I need to create lower thirds in AE and export them individually which I hope to avoid.

    Any ideas why this happens? I use both products CC version.

    Thanks in advance for the help

    Do not forget that you are using the same version of CC for the first and AE (2014,2015...)

    and that each After Effects compositions that you want to import have the option enable the model in settings of composition in advance.

    It will be useful.

  • When will we be able to export projects model adobe for Muse?

    The new version of Adobe did a demo at AdobeMax 2015 and there is the possibility to send to Muse (with Ps, Id, Ai)

    I've updated to the latest version of the model (mini iPad and iPhone) but you do not see this option... Was this a beta feature?

    Hi Ewhyn,

    Hmmmm, how to say it without saying too much... Hang in there. It is not much more time.

    Sue.

  • export of multiple projects since photoshop fix

    Hello

    I have 128 projects created in Photoshop Fix on my iPad. I can see the Mobile creations creative cloud folder and can export projects one by one, but is there a way to move/export all 128 in the folder of files?

    Thank you

    I can see in a browser creative cloud but cannot move all the in the folder of files on my desktop unless I export one after the other.

Maybe you are looking for