Export to Flash (.fla) file! -Media encoder does not work. Export failed!

Similar Questions

• My media encoder does not work anymore and finally fails when it gets to the jpeg format...

  .. few of the jpegs, I got it to fit the size of the screen, som, I didn't--doesn't seem to matter.  I'm relatively new to working with Adobe, so any help would be appreciated.

  Thank you!

  Hi Ray,

  Make sure that the jpg is in RGB format (check in Photoshop or other). In addition, is not superior to, say, 4000 x 4000 pixels.

  Thank you

  Kevin

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...

• Windows media player does not work, no sound

  the sound has stopped working and Windows Media Player does not work.

  Click on the link below. Enter your product number as that indicated on the Service tag on the bottom of the laptop (can be under the battery). You can also get the product number by pressing Fn + ESC key. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & save the last Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Go into the Control Panel, programs & features - software uninstall IDT. Reboot the laptop and install using the downloaded file.

• Windows media player does not work as no driver DVD

  Had to format drive (trojan) & reinstall Windows XP home. Now Windows media player does not work as no DVD driver download from Toshiba site?

  Hello

  Usually the Windows media Player is not able to read DVD movies IF no plugins were installed.
  To watch DVDs, you can use programs such as WinDVD or PowerDVD.
  These programs are designed for the DVD play!

  But you can also visit the Microsoft Web site and search plug-ins for Windows Media player.
  Then you can download and install to play a DVD with WMP

  Best regards

• Satellite A300 - easy key of Windows Media Player does not work

  Can someone help me?

  My easy key of Windows media player does not work and I have installed the package of value added. I don't know what's wrong all the other buttons seem to work well.

  When the VAP is installed this button should be enabled to start Windows media player by default.
  In any case, you can test the functionality if you set it to start another application.

  Configuration tool buttons you will find under:
  Toshiba Assist (shortcut on the desktop) > Optimize > Toshiba Button support.

• VI quadrature encoder does not work after programming of FPGA

  I'm rather new on the MyRIO, and I work on the motor of the MyRIO and read control in a quadrature encoder at the same time. Programmed individually, the two pieces of work at Marvel, but once I have combine them and try programming, control of motors not to not work signals, but the reader encoder does not work. I use the Express VI for the LabVIEW quadrature encoder reader, and I produce four stepper motors signals using FPGA.

  It seems as if the encoder is disabled when I program the FPGA with my code, because if I have two parallel loops, one for the reader encoder and the control of step motors, if I stop the loop of step motors, the encoder works immediately.

  Is there something simple that I'm missing?  Any suggestions would be greatly appreciated!

  Thank you

  Enan

  I realize now that my last answer could have been confused and not useful to someone else who may come across the same problems later.

  Here is how I solved the problem I've had:

  I had to derive Boolean expressions for an encoder quadrature (essentially to create my own) and then used the outputs (UP, DOWN) to increment/decrement a counter using the conditional statements. Then, I stored the value of direction in a flip flop implemented using two conditional statements of T/F in series and connected to a shift on the edge of the loop register.

  It was all able to be implemented in a single cycle timed Loop, and then I managed to place in the same loop that I used to control stepper motor.

  In this way, I could have a VI collected in a Bitfile and could be programmed to the FPGA.

  Hope this is clearer!

  Enan

• After a computer crash, I reinstalled Windows XP, but Windows Media Player does not work.

  After a computer crash, I reinstalled Windows XP, but Windows Media Player does not work. I don't have reinstall all disks. Will install tools software system Dell, Sonic RecordNow, Sound Blaster Live, or CyberLink Power DVD play cd possible? Thank you.

  original title: Media Player

  Hello

  1. What is the exact error message or error code when you try to open Windows Media Player?

  2. what version of Windows Media Player?

  3. What is the issue you are experiencing during playback of the CD?

  I suggest you follow the Microsoft article reference and check if it helps.

  Troubleshooting playback in the Windows Media Player for Windows XP: http://support.microsoft.com/kb/306317

  Resources for the resolution of problems in Windows Media Player: http://support.microsoft.com/kb/843509

  I recommend you to install the software provided by Dell disk and check if it makes a difference.

  Note : using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Windows Media Player does not work when I Google Chrome on pagers Web in Google Chrome

  Windows Media Player does not work when I go on Google Chrome on WebPagers in Google Chrome please help me

  Hello

  1 What is this problem occurs with the Google chrome or windows media player?

  2 are you able to play another song from Player Windows Media outside the Google Chrome?

  3. have you made changes on your computer?

  4. have you received an error message?

  I suggest you to follow the steps and check.

  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=95697

• Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Hello

  For someone to really help him, it is important to give as much information as possible.

  You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?

  If it happened "yesterday" did you updated anything or whatever installed?

  Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?

  What TV card are you using and have you verified that this works correctly?

  If you get not a photo is the antenna in place properly?

  Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• Windows media Center does not work correctly.

  * Original title: Windows Media Center

  Downloaded 10 hated windows he returned to windows 7

  Now, windows media Center does not work correctly. Very slow to do anything whatsoever at all, let alone play music

  Any suggestions please

  Try to uninstall, reboot, reinstall, restart WMC according to the http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/ article is for WMPlayer but just to check the entry of WMCentre instead.

  If that doesn't help, try a SFC/scannow and see if it detects and corrects something - https://support.microsoft.com/en-us/kb/929833

• Media Player does not work; message says to check the resolution and brightness.

  My computer just upgraded day and now the media player does not work. I use it everyday and it is a first.
  It says to check the resolution and brightness, and when I did they are recommended places.   Help, please!  Thank you!

  Hello

  1. are you referring to Windows media player?

  2. What is the exact error message?

  3. when exactly you receive this message? By playing any video/audio?

  4 does happen with a particular video/audio?

  5. have you made changes on the computer before this problem?

  If you use Windows media player, you can follow the methods.

  Method 1:

  You can run the fix - it from the following link.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2;

  Step 1:

  You can uninstall Windows media player. Check out the following link.

  Uninstall Windows Media Player
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck Windows Media Player.
  d. restart the computer.

  Step 2 :

  Reinstall Windows Media Player
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer and check the issue.

  For more information, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Post back with the results for you help more.

• Cruise control of Windows Media Player does not work.

  Original title:

  Cruise control of Media Player does not work - lack key where the mouse is going to slide upwards or downwards.  Microsoft fix procedures HAVE NO WORK!

  I have the latest Media Player and Windows 7 on my laptop and desktop.  Despite the procedures proposed by the experts from Microsoft, the slider that allows music to set speed still does not work because NO button on the slide to move and set the speed.  Please to don't ask me not to make the Control Panel, etc... procedures.  Already done.  Epic fail.

  Hello

  You can use the below mentioned link to post the question to improve the assistance:

  http://experts.Windows.com/FRMS/default.aspx

• Media Analyzer does not work in EPS 14-13

  My media Analyzer does not work in PSE 14 or 13.  It works in PES 10.  It is found in the menu Organizer - Edit > Preferences > media Analyzer. (Can also be called 'Automatic Analyzer').  In 10 of PSE, it analyzes the images for: development; Fuzzy; low contrast; long shot; etc.  Many other tests, so that you know which are good or bad, etc.  Also locates people if you choose this option, which I did not.  In Preferences > media Analyzer, you choose the options that you want, but it is not analyze all the images in the 13 & 14.  PES 10 there is a list of boxes of the analysis below the keywords and you can click on 'in focus' and all these images in short are shown.  Same for any other analysis, but not in PSE 14 or 13.  This is a great feature, if you can make it work. Someone knows how to operate?  PES 10 is great.  Also would be great in PSE 14 to identify shaky images for his new feature - Shake Reduction.  Thanks for the suggestions, answers, Trish

  See the other your discussion:

  Media Analyzer (Auto) does not work