Export video w / first Sound do not play correctly After Effects.

Similar Questions

• Sound does not play correctly

  computer is a DELL and I have Windows Vista Basics

  During playback of a movie onlie I can hear sound and effects all sounds that are not a voice of people.  I plugged the speakers and I am able to hearthe voice barelly but all other sounds loud and clear.  When I play something lively, the sound is very good as well.  How can I fix it?  The music plays very well.  The only problem is with DVD

  Hello

  How can I stop my music skip or break down when I play?
  http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC

  1. right click the icon of speaker near right lower clock - peripheral of reading

  Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
  Apply - OK

  2. check the configuration - Device Manager - sound, video and game controller

  Note name and complete model of the audio device - full decription - now double click it.
  Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
  behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
  the driver stack.

  Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
  your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMIN

  Then do the same for the manufacturer of the device (like Realtek or who made the device).

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  
  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ==================================================

  You need Codec - get these

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ---------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• videos of iphone 4S do not play correctly

  IPhone 4S vedio vista problem

  When I insert a vedio from my iphone 4s, he plays not corectly.  Is microsoft vista problem or will pro quick time solve the problem or doI need to change my OS to windows 7?

  Hi BennyVigil,

  ·         What is the file format?

  Follow these methods.

  Method 1: Uninstall and reinstall QuickTime.

  http://support.Apple.com/kb/HT1923

  Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Update the latest codecs.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Audio does not play - CS6 After Effects

  After you import a .mov to a canon t3i.

  Not in the preview, and even after the audio rendering.

  Why?

  Help.

  Thank you.

  If it worked in CS5 so that sounds like it might be a bug with the T3i format.  Try to report a Bug here: http://www.adobe.com/go/wish

• sound does not play when windows vista starts or stop

  sound does not play when windows vista starts or stop

  Hello

  • When the issue started?
  • Will there be any changes made prior to this issue?
  • Otherwise, the sound works well?

  Step 1: Refer to "the startup sound is not played correctly when you start Windows XP or Windows Vista
  ' http://support.microsoft.com/kb/321735 '.

  Step 2: To change the sound on closing down.

  Audio a.Open and Sound themes by clicking the Start button, clicking Control Panel, hardware and sound, and then clicking sound.

  b. the sounds tab and then, in the list programs, select the event you want to change the sound.

  c.Under sounds, click the sound you want to associate with the event. If the sound you want to use is not listed, click Browse to locate it.

  'Change the sounds of the computer '.
  ": http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds "

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Sound will not play on my uploaded personal videos.

  I use Windows Media Player. Sound works perfectly for the downloaded music and video and CD audio will not play on my uploaded personal videos. I have the software to manufacturers, but they told me that it is a Windows problem. Ideas for a solution? Thank you very much.

  Download Media Player Classic "not stable", without any fear.

  Install it and play your files 3gpp without problems.

  Download button is on the right.

  FFDShow has no need to be open, if you can not get your audio to play because you do not have the appropriate separator installed.

  Media Player Classic doesn't have this divider.

  A bit of theory:

  A video file is usually identified by its extension ("avi", "mp4", "mkv") etc.

  These are only "containers" like a box.

  Inside them, we have streams encoded in different formats (video, audio, subtitles, etc) (for example: audio in MP3 or video in Xvid or MPeg, Dolby etc..)

  So we need two tools:

  1 to open the container and separating ("separator") flows

  1 to decode the different streams, which was the intelligence of reverse the encoding into decoding. It is the role of ffdshow.

  What you're probably missing is the separator to separate streams. Try Haali splitter media (http://haali.su/mkv/). This should allow ffdshow to watercourses and that WMP works.

  After return your results.

  Carlos

• Video will not play correctly in Premiere Pro CS4

  Hello

  I imported a video file in first Pro CS4. but he does not play correctly. The sound works perfectly, but for some reason, the video does not start even to the end where you will have about a second and a half of the video, and then it stops because it has reached the end. How can I get the video to play properly?

  The video is:

  Format: AVI

  CODEC: XVID

  FPS: 25 fps

  The project file is:

  FPS: 25 fps

  Standard 48 kHz

  NTSC

  Note that the video sequence that is, plays very well apart from the fact that it poses very slowly and begins at the end.

  Thank you

  The search form to XVID

  It's a VIEW codec that is not designed to be edited

  Convert DV AVI Type 2 with its 48 kHz to change

• Satellite L665D - sound is not played smoothly - crackling sound

  Dear readers,

  I am the owner of a toshiba l665D and there is a problem.
  Whenever I have to use something to involving
  sound looks like garbage.
  The sound is not played smoothly there are breaks, and there's a big cracking
  sometimes sound in it.

  It's not because of the speakers, I also tright through the headphone output tube.
  Pourrait this possilybe because of a card of its damaged.

  It's sound really garbage and the laptop is not yet 2 years old yet.

  What could be?

  Hello

  I think that this is unrelated to its faulty card but due to the old driver TSRI (Intel Rapid Storage Technology).

  I found a thread on the issue very similar.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60231

  Update TSRI (Intel Rapid Storage Technology Driver) to the version V10.1.0.1008 or later to resolve this issue.

  I recommend trying this!

• Windows XP default sounds do not play

  Sounds of Windows XP by default do not play__

  I have Windows XP home on my laptop.  By default, as a new email, etc sounds do not play.  I ran "How to solve audio problems in windows XP" and he says that he can not detect a problem.   The speakers and all other sounds work fine. I really want my opinion to express email outlook to the sound, I could doing others. When I go to control panel, sounds and devices, windows, notifications, browse and play the sounds that they work very well, but they do not play in normal operation. I have "play sound when new emails arrive" checked in OE, still nothing.

  Any advice would be appreciated!

  Hello

  ·        Remember to make changes to the system?

  ·        Since when are you facing this problem?

  Method 1:

  I suggest to run the SFC (System File Checker) analysis on the system and check if the problem is resolved.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  I suggest to uninstall and reinstall Outlook express on the system and check if the problem is resolved. Follow the steps mentioned below.

  a. Click Start, and then click Run.

  b. type appwiz.cpl in the run box, and then press ENTER. This will open Add and remove programs on the system.

  c. click Add and remove Windows components and look for Outlook Express and then clear the check box that is next to it and click Ok. This allows to uninstall Outlook express on the system.

  d. again to open the Windows component box, place a check mark next to Outlook express and then click ok.

  Note: This will reset the settings for outlook express.

  Check whether the problem is resolved.

  An Outlook Express basic repair kit

  http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Notification sounds will not play

  Original title - game sound recording.

  My notification sounds will not play. No matter what scheme I use, some sounds are coming. The little green triangle is turned on, but when I use it to test the sound, nothing happens. Apart from that, all other sounds work fine

  Hello

  No sound in Windows is a relatively common problem. Try the instructions on this site from Microsoft and see if that restores your sound.

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• I need help on how to audio output when I go. I ticked the box at the bottom, but when I go to view my video on quicktime, it does not play audio.

  I need help on how to audio output when I go. I ticked the box at the bottom, but when I go to view my video on quicktime, it does not play audio.

  GUYS, I GOT IT. AND THE SOLUTION IS WAYYYYY WITH JUST A RENDERING. So after countless time I spent trying to make it, I found a way that me really happy that my old rendering has not worked. All you have to do is download adobe media encoder and BAM your gold. I make it in h.264 that i couldt using the old rendering and now it works fine.

• Sometimes sound does not play when you play multiple sounds simultaneously

  It is also a matter of best practices, too.

  I built a game that uses many different sounds (about 48 I think). Many are short, less than a second and a few are longer, of the music cues, etc..

  Example problem: sometimes when there are a lot of play sounds and a music signal is supposed to fire, the sound of the music does not play. I did a trace on the function that plays the sound music and performs this function. Are there limits to how sounds can play at the same time? (It does not only happen to a particular sound, could be any noise)

  Also, regarding best practices, if there is a sound that could be played several times at the same time, a new instance of the noise must be created each time as its played? If there is that a single instance of this noise, will be the previous reading of this noise cancelled when it is called for replay?

  Thank you

  Adam

  There is a soundchannel 32 limit (which may exist at a given time) imposed by the flash player.  all two identical sounds may not play in a number of ms on the other.  There is no perceptible advantage and refusing the deductions that you may be able to play the sounds that are noticeable.

• Sound is not in stereo after rendering

  My big problem is in the title. I made a nice video of my study in Hawaii, but unfortunately the sound is not in stereo after rendering. Any settings that I use, the sound just the left speaker on my 5.1. System. Does anyone have an idea how I can fix this problem? Thank you very much! Sam

  Unfortunately, you cannot change your settings in mid-project. You can only configure them when you begin your project.

  You can find more this kind of basic information in my basic training tutorial series part 8 to the first Elements Muvipix.com support site.

  http://forums.Adobe.com/thread/537685?TSTART=0

• Plugins does not work in After Effects CC15.3

  Everything worked perfectly yesterday. A project of client using some of my favorite plugins like Trapcode Form and particular.

  After update today, would continue my project where I left.

  However, the majority of my plugins disappeared, leaving me unable to progress, short on time.

  I had to completely start over, with a new idea and the standard after effects plugins.

  I tried to reinstall them, but they may not appear.

  Did anyone facing this problem too?

  Can you please help.

  Like HippieBoy, but on Windows 10, I tried to copy the plugins trapcode manually from the

  "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Plug-ins\Trapcode.

  TO

  "C:\Program Files\Adobe\Adobe after effects CC 2015.3\Support Files\Plug-ins\Trapcode."

  and my trapcode plugins where backward. The amazing thing is that I have installed the Plugin Trapcode after having updated to 2015.3 CC. The reason was probably that the Trapcode plugins trial version installed to AE CC 2015 and that the folder was still here the licensed version of Trapcode installed in the old folder.

  Re: Plugins does not work in After Effects CC15.3

  Hope this will help

• Stop on images will not import into After Effects

  I created a still image in Premiere Pro, I've tried to "Replace with After Effects Composition year" in order to animate a little. However, for some reason, the image does not load in After Effects. I tried it with several other images, all that worked. AFAIK nothing has changed since these instances to it (be put aside, obviously, the fact that I use a different image).

  Any idea what I can do to fix this?

  Thank you!

  Temporal changes and frozen images of Premiere Pro are not AE. No more titles or transitions. It is a limitation, you must live with for now.