ExpressCache does not work properly '%0' Caching problem»
Hello
I really need serious help
ExpressCache rest blue curves to & 0 for always and does not work. But the program itself says 'caching '.
According to my meter to start, I did 25 boots because I install the program.
SanDisk readycache player is NOT in dynamic mode
It doesn't have any partition on it
system sees the drive and his health.
My C drive is also a disc of sandisk SSD incidentally.
Can someone help me how to make this Expresscache function correctly?
How many disks is connected to the computer? Just the SSD C drive and the readycache? If so it cache never puts anything because drive C is an SSD. This solution is for HDD + SSD readycache for cache. Your C drive is already on an SSD, so there is not need to hide something on this subject.
If you have another HARD drive connected to the computer to ensure that they are not dynamic disks, and you would have to access data or run programs that are stored on or installed on the HARD disk before any caching occur.
Tags: SanDisk SSD
Similar Questions
-
recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work. I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found. So I restored by computer back to before I left on vacation, but still no sound. No pop up with the dll is not found though. I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance. said the task of event 20 116. I have an ACER one with windows. the computer has HDMI dolby and realtek.
Judy Hello,
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.
Certainly, I understand your concern and will try my best to help you.
I appreciate all your efforts really to try to solve this problem.
This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.
I would suggest trying the following methods and check if that helps.
Method 1:
I suggest you to refer to the procedure described in the article below and check if it helps.
No sound in Windows
Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.
Also try to install the latest drivers from the chipset in the system and check if it helps.
If the problem persists, follow method 2
Method 2:
How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.
https://support.Microsoft.com/kb/929833?WA=wsignin1.0
Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?
My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
-
Satellite L775 - mouse pad does not work properly
I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.
What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.
What's past and how to fix this?
Thank you very much.
> What's past and how to fix this?
After reading your ad, I still don t know what is your problem.
> My mouse pad is not working properly
How to understand this? What does not work properly? What happen exactly when you start your laptop? -
Mat * one years (uj-840) DVD player does not work properly
The Mat * one years (uj-840) DVD player does not work properly.
A symptom of the problem is that the icon does not appear in 'my computer '.
more and she does not recognize the CD.I went to the properties of the drive through Device Manager and saw the following message is displayed:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Click Troubleshoot to start the troubleshooter for this device. »Following the instruction of the troubleshooter, I tried to update my driver through
Device Manager, but it tells me that the current driver is the more up-to-date version.
In the properties of the drive, I found that my driver version is: 5.1.2535.0What is a simple problem that has a solution?
I don't see other actions to find the root of the problem.Thank you
I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
Check it out! -
Keyboard does not work properly
Hello
I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.
When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?
Thank you very much
Tom
Hi Tom
Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.I think the keyboard needs to be replaced to check if only this part is affected
-
Carpet * a DVD - RAM in Sat M55-325 drive does not work properly
The Mat * one years (uj-840) DVD player does not work properly.
A symptom of the problem is that the icon does not appear in 'my computer '.
more and she does not recognize the CD.I went to the properties of the drive through Device Manager and saw the following message is displayed:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Click Troubleshoot to start the troubleshooter for this device. »Following the instruction of the troubleshooter, I tried to update my driver through
Device Manager, but it tells me that the current driver is the more up-to-date version.
In the properties of the drive, I found that my driver version is: 5.1.2535.0
I have RecordNow from Sonic/Roxio which is preinstalled on the computer.What is a simple problem that has a solution?
I don't see other actions to find the root of the problem.Thank you
Hello
Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 Microsoft
I had similar problem. The ODD (optical disc drive) did not appear in Windows Explorer. Method 1 from this page solved the problem. Please try the same thing and let me know if ODD working again.
-
Satellite C850 - internal MIC does not work properly
my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please
You must mark the internal mic as the default device.
This can be done in its tab → click right on internal mic to record and choose the default device -
Satellite P25-S520 - DVD player does not work properly
Difficulty of DVD player or buy the external drive
My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).
I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.
An attempt to update the driver has also fails.
I was able to copy a CD of music last night so that at least works properly.
Does anyone know how can I fix? The important part is to be able to load my new program.
Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?
Thanks for any help,
Humbaba3000BCSatellite P25-S520
PIONEER DVD - RW DVR-K12D
Driver provider: Microsoft
Driver date: 01/07/2001
Driver version: 5.1.2535.0
Digital signer: Microsoft Windows PublisherAny external USB CD/DVD drive will be compatible with your laptop.
However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.
So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
my laptop pointer freezes sometimes and does not work properly
I have a sony vaio notebook. This pointer does not work properly most of the time, and it freezes. I have to restart my computer to fix it temporarily, but it happens again and again. I wonder if my system is infected with a virus or not. can fix this or I need to recover my laptop. I look forward to your reply. Thanks indeed
Try to go to the sony web site and get the last mouse and mouse pad drivers.
If an external mouse, clean and check the batteries if applicable.
If this isn't an external mouse, try an external mouse and see if the problem persists.
Then...
If you use Microsoft Security Essentials, start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.
If this is not the case, go to your provider AV.
You can also try this web site - http://www.bleepingcomputer.com - contains details for most common infections, often immediately after that they started to appear in the wild, and instructions are provided for how to remove infections using their malware removal guides. They also have forums where you can seek assistance from people who specialize in the removal of malware.
Here are other free programs that can help:
Malwarebytes anti-malware free - http://www.malwarebytes.org/products/malwarebytes_free Please note, do not accept the trial version of MBAM Pro that it will conflict with MSE while the free version won't.
SUPERAntiSpyware Free - http://www.superantispyware.com/downloadfile.html?productid=superantispywarefree
TDSSKiller (free) - http://support.kaspersky.com/faq/?qid=208283363
HitmanPro (free for 30 days) - http://www.surfright.nl/en/hitmanpro
-
Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color. It's still orange, not mater if your speakers are on or off. His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.
I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there. The problem is about 2 weeks old. Have not added any new software that I know. But computer installs updates as received.
SimonHello
First download the audio driver by using the links below and save the installer to your desktop.
Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version. Once the installation is complete, restart the laptop.
Kind regards
DP - K
-
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
ATI Graphics Driver does not work properly
All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
I have checked all the updates of Windows, said that I installed all available updates. Help, please!Hello
First manually check the updated drivers with ATI and ask their support and Forums on all known
questions. Use the methods to update the following drivers.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx============================================================================
Other troubleshooting methods would include the boot minimum and others who might help determine
the cause and eliminate problems.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Maybe you are looking for
-
can I block someone to send iMessages
CCan block someone to send an imessage?
-
G6-2330ee Pavilion: Widi software for windows 10
Hi all How are you all and hope all are well. I upgraded my g6-2330ee Pavilion with Intel HD Graphics 4000 & ATI Radeon 7670 M to 10 windows. I tried to install the Viewer software Wifeless Intel I downloaded the version of Windows 8 software to the
-
Satellite A300 1 5 - freeze at startup
Hello.. I [Satellite A300 1 G 5 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1055589] which came with windows Vista SP1 32-bit initially
-
Pavilion HP500-a60: mp3 cd
I am interested in buying an audio cd MP3. He will play on computor subject or do I need special software to be able to play this type of cd? Kindly help if you can. Thank you very much. Norman
-
When I synchronize text messages in my treo 680 not transferred into my palm desktop. How can I download text messages to my pc? Thank you!