Extend a thickness of stocked SCSI disk?

Similar Questions

• H9 SCSI Disk Device

  My desktop computer HP Pavilion HPE h9 - 1215t Phoenix CTO has a hard drive WD 2 .0TB with the C drive, containing the Windows 7 operating system.  There is also a SCSI disk (MTFDDAK2 MTFDDAK256MAM - 1 K).

  What is the SCSI drive?

  "My H9 is an h9 - 1215t and the SSD 256 GB is not recognized when I go into computer, management of disk storage management."
  Computer Management displays:

  Disk 0 (basic 238.35 GB online) with 3 partitions; No name 100 MB EFI system Parition
  OS (C: 227,71 GB) and HP_Recovery (D: 10.54 GB NTFS).
  ---
  DISK 0 - it's essential / Micron (256 GB) Solid State Drive (SSD) with 3 partitions.
  DISC 1 - it's your drive Western Digital hard (2 TB).
  ---
  MS Windows 8.1 with UEFI and Secure Boot is significantly faster (almost compressed as) than MS Windows 7.
  I don't know how this specific HP computer was (originally installed) installation.

  You have applied the update driver Intel Rapid Storage Technology (RST)?
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-119917-1&cc=us&DLC=en&LC=en&OS=4063&product=5261660&sw_lang=
  ---
  The age of this SSD, MANY manufacturers released a updated firmware to date - to increase performance and respond to questions. For example, my SanDisk Ultra II SSD had a firmware update (2nd quarter 2014) that solved problems with Windows 8.1 reboot intermittently.

• What is WDC WD10 EADS-65M2B1 SCSI Disk Device

  What is WDC WD10 EADS-65M2B1 SCSI Disk Device

  Thanks a lot to explain that to me.  Yes, I noticed that the My Book device brought back ups info.  Thank you for helping me...

• Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable.

  Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt?

  Hello

  You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7.

  If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7.

  Hope this helps and works.

  Chris

• When you buy an extended image lisence adobe stock can I use it as the back ground for a mail announcing who will be on the first page of my business profitable online store?

  When you buy an extended image lisence adobe stock can I use it as the back ground for a mail announcing who will be on the first page of my business profitable online store?

  Adobe Stock license allows you to use your assets anywhere in the world, and the license never expires. You can use the assets, in print, presentations, Web sites and even on social media sites. However, you may not distribute digital assets by posting it online or in any other way that would leave other people to use the assets without permission it is.

  from there:

  Royalty-free images, pictures and graphics. Adobe Stock

• My daughter just got a new laptop... of course it is not a CD/DVD drive. On his previous laptop that she had Photoshop CS6 extended... loaded from a disk. So now, we try to know if she can download and use his 'KEY' of the disk?

  My daughter just got a new laptop... of course it is not a CD/DVD drive. On his previous laptop that she had Photoshop CS6 extended... loaded from a disk. So now, we try to know if she can download and use his 'KEY' of the disk?

  See download Creative Suite 6 applications

  Hope this helps

  Thank you

  Varun

• How to fix windows in virtual scsi disk?

  Hi guys,.

  I have a server windows server 2008 in my computer running on wmware preinstalled. A week ago my server crashed. Now when I try to repair using the windows image, it says "Setup not found disk units installed on your computer.

  The drive I have installed windows is a SCSI disk (a virtual scsi disk, I have not all scsi devices connected to my PC). Without disks hard appear in the BIOS but if I am not mistaken, it's normal because only the SATA and IDE are see the place in the BIOS.

  I just need to repair windows using the iso, I have... Help, please

  most of the time the problem of 'lack of pilot' on Win7 and 2008 is bad downloads

• How to find if a scsi disk can be used as a ROW or only use not vsphere CLI.

  Hi, I want to know if the SCSI disk can be used as RDM and a remote computer running vSphere CLI.

  I tried to use 'vicfg-scsidevs - l', but it doesn't have the required information list

  ===============================================

  Here is sample out put

  MPX.vmhba0:C0:T1:l0

  Device type: disk

  Size: MB 69459

  Full name: disk space from VMware (mpx.vmhba0:C0:T1:L0)

  Plugin: NMP

  Device console: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T1:L0

  Seller: VMware model: Block device Revis: 1.0

  SCSI level: 2 is nickname: status:

  : RDM Capable is removable:

  Other names:

  VML.0000000000766d686261303a313a30

  empty fields "Is Capable RDM" here.

  =======================================================

  When I executed the command 'esxcfg-scsidevs - l' on an ESX Server, he gave me the necessary info.

  MPX.vmhba0:C0:t0:l0

  Device type: Direct access

  Size: 138919 MB

  Full name: disk space from VMware (mpx.vmhba0:C0:T0:L0)

  Plugin: NMP

  The console device: / dev/cciss/c0d0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba0:C0:T0:L0

  Seller: VMware model: Block device Revis: 1.0

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: false

  Is Local: true

  Other names:

  VML.0000000000766d686261303a303a30

  So is it possible for vSphere CLI through which we can tell if the SCSI disk device can be used as ROW or NOT?

  and what parameter defined as capable of RDM?

  Thank you

  Chandra Sekhar P.

  Hi Chandra,

  In order to get the SCSI LUNS that can serve as RDM, you must use the QueryConfigTarget method. This method is defined on EnvironmentBrowser. You need to recover some EnvironmentBrowser object ComputeResource the HostSystem where the virtual machine is created. The configTarget.ScsiDisk returned after the method call contains the logic unit number information that is capable of RDM.

  I hope this helps!

  Neha

• VI 3 virtual machine SCSI disk is changed on the IDE drive in vsphere 4

  Hi Experts,

  When the virtual machine SCSI disk is add to the Vsphere virtual machine, only the scsci disk 3 VI is replaced by the mode IDE drive can be added.

  How to solve it? Thank you.

  Add a SCSI controller on the virtual machine and then add the disk

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  -Josh

  Trying to learn

• Several stores data on the Local SCSI disks?

  Hi all

  Is it possible to have several data stores on 1 partition VMFS on scsi disk?  or have you partition than to install multiple VMFS partitions?

  I have 1 VMFS 500 GB partiton, but it does not chop into several datatsores?

  The 'fb' partition created during installation is the VMFS data store. You can add another disk and use fdisk without problem.

  To do what you want, I guess you would need to delete the existing partition and then use free space to create new partitions 2 or more which could then be formatted with the VMFS. It is a question of intresting so I thought I'd look around (not enough to trash my interesting, but interesting test server). I found this ad that may be useful

  http://www.virtualvcp.com/content/view/67/26/

  Think I might give this whirl next time, I have a system still undelivered to the customer

  Post edited by: bulb for spelling and clarity

• split scsi disks under Vista in preparation for upgrading to W7

  I have a seimens with scsi drives office 5 x 18 GB.  I have Vista Enterprise on the first hard drive.  I want to upgrade to Windows 7 Enterprise, but there is not enough space.  I was hoping that I could extend to other readers, creating a more dynamic disk, but it does not allow this.   What Miss me?  Is there a way to span the primary transmission 0 additional disks to create a larger combined can accommodate W7

  Hello

  The issue of Windows Vista you have posted is related to Windows Vista in a domain environment. It is better suited for the IT Pro TechNet public. Please post your question in the

  TechNet Windows Vista forum.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to extend the volume so that the disk space is increased.

  original title: putting a space in the Documents folder

  Hi I want to increase the size of th of the folder my documents. I have an unallocated partition or whatever his name and my drive C is too small. I want to increase the forlder increased also soze documents. Windows xp dell is the system

  All I want is to use the unallocated space so that the part is given to my C and then I have a D drive as well thanks for reading.

  Hi Jack_76,
   
  See the methods mentioned below and check:
   
  Note: Back up all important data before performing the steps in the following methods.
   
  Method 1:
  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008
  http://support.Microsoft.com/kb/325590
   
  Method 2:
  See How to extend a Simple or a split Volume at the following link.
  How to use disk management to configure dynamic disks in Windows XP
  http://support.Microsoft.com/kb/308424
   
  For reference:
  To extend a volume single or split
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/dm_extend_volume.mspx?mfr=true
   
  Hope this information helps.

• Need to read a RT - 11 on Windows SCSI disk

  I have a SCSI-2 hard drive, formatted as a DEC RT-11 record.  I know that the structure and disk file formats.  I need to be able to read individual disk blocks.  How can I mount this stranger to allow C read blocks?

  Good question and one that will not be answered here.  Hit the forums of MSDN programming for assistance with programming issues.

• Windows 7, how to extend volume C, when the unallocated disk isn't adjacent?

  I've updated since a 250 GB HDD on a 750 GB hard drive, but can not access the extra space.  To extend the volume C is greyed out.

  From left to right, the displayed disks are:

  System > C > Recovery (D) > HP_Tools > 465,75 GB unallocated

  I want to thank the C drive in the unallocated space.

  Thank you!

  I've updated since a 250 GB HDD on a 750 GB hard drive, but can not access the extra space.  To extend the volume C is greyed out.

  From left to right, the displayed disks are:

  System > C > Recovery (D) > HP_Tools > 465,75 GB unallocated

  I want to thank the C drive in the unallocated space.

  Thank you!

  http://www.pcandtablet.com/Windows-7-General-Chat/236/although-i-have-enough-UN-partitioned-space-extend-volume-option-is-not-activated.html

  If your find it difficult to deal with the windows Disk Manager
  Use this version free http://www.partition-tool.com/personal.htm

• Thickness as Thin provisioned disks

  I had a strange situation this morning and I hope someone can shed some light for me.

  I have a virtual server with several big (300 GB and 200 GB) HARD drive.  The two HARD drives were created as thick put in service, as I recall they show also thick configured in the properties of the server.  The data is stored on an iSCSI SAN.

  This morning, I came to find one of my virtual servers had been frozen as he had ' not enough space to write.  I looked in the store and found the property that the disks have been configured in thick they are infact behave more like thin disks.  In the store, they show that 110 and 202 instead of 200 GB and 300 GB.

  Any thoughts?

  The screen capture, it seems that your VM has 3 virtual disks (~ 256GB, 60GB, 350 GB). The size of the snapshot files (the screenshot doesn't show timestamps), I guess that there has been a problem some time ago (one of the snapshots already is ~ 67 GB in size) with delete snapshots after a backup operation.

  You must take immediate action to get rid of snapshots! However, to know whether to save just delete catches instant in the Snapshot Manager (it can currently not display any shots even if you have a little) I need to know what version/buils of ESX (i) you are running and the amount of free space on the drive you have on data stores different (the virtual disks are located on different data stores)!

  Currently, the virtual machine works without problems?

  Please join (not paste) the last file vmware.log file for the virtual machine (see the screenshot).

  André