Extend hardisk does not increase the size

Similar Questions

• Is it me? Does not increase the height of page...

  Good so I was looking and looking for a response.  I set my header and footer, but adding content in the body does not increase the height of the page.  My site will have length and content of page various.

  I continue to watch the tutorials where size adjusts and lowers the foot of page, but on my layout, left 500 when I add elements to the body, and the elements overlap the footer.  I know that I can fool the site by adding a hidden box that draws the page downwards. I know that I can go to the properties of the site to adjust the height individually, but I would like to take the sensitive element.  The site is assigned to the fluid properties by the way.  Can someone tell me what I'm missing?

  Make sure you place elements are has no upper element 'footer' (check box in the command strip). If you place items in the footer box, this attribute will be checked automatically and perhaps unwittingly. In this case, the element will not push the foot down.

• I am connected but the network properties window does not show the size of the packets to all the

  I am connected but the network properties window does not show the size of the packets to all the

  Hi asaimas,

  You can follow this link & check if it helps:

  Configure the Option of configuring server network packet size

  Hope the helps of information.

• frequently viewed topics report does not increase the number of new hit

  Hi experts,

  I have a project published on RH 9 server with webhelp pro. the frequent search term gives me reasonable counties, each time when the same search term, the number has increased. but the report of frequently viewed topics does not increase the number for the topic I clicked several times (whenever I have click on another topic and then return to click on the same subject). adobe support told me that I should close the window, then re - open the link and click again on the topic, but it still doesn't work. We finally know is that I have to delete all historical data in the cache and reopen the window, then click on the same subject, then the County will go through one.

  I wonder if this behavior is normal or not. If it is normal, how to use this report?

  Thank you

  Frances

  Hi Frances.

  I'm not an expert in browser, but it seems plausible. The browser cache is designed to avoid having to download content locally whenever a page is opened. Whenever a page is open to scrutiny is conducted to determine if the cache already contains elements of it. If it has, it uses this local version. With the local HR server as the version of the cache statistics are not being updated, because the page is not viewed from the server.

  It may be an idea to set your browser options to delete the history of every time that it is closed. Also, be aware that it is possible that different browsers may have slightly different options.

  Colum

• Removal of documents does not increase the amount of available space (Cruzer facet)

  When I delete files on my drive Cruzer facet Flash to make room for other files, the available space does not increase and so I can't add more files. Everyone knows this? How should I do?

  You use a PC or a Mac? If you use a Mac, you must empty your trash, while the disc is still connected or will not remove the files.

• total size of the files of Windows 7 does not match the size of partition

  In the D: partition

  total space: 265 GB free space: 59.1 GB

  There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

  Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

  Of course free space does not match the file size.

  Do not partition system, no problem to update windows and restoration, sleep or page file.

  Some strange things:

  1. with the help of file size 3.4 correctly see the size of the file

  Daisy file occupies 206GB

  Once I copied the whole file to the other partition Daisy

  and the result is the record more like 2xxGB

  so I guess that 206GB is the right size

  /////////////////////////////////

  may be ignored.

  2 folder being read-only Daisy

  Even uncheck or untick read only box in the properties of the folder does no effect

  After loading, it still shows read only

  3. 'read only' does not work

  2, daisy file is read only

  but I managed to delete files inside

  ////////////////////////////////

  ////////////////////////////////

  Is it a mistake to folder structure?

  It's a newly installed windows, so I guess that windows is clean

  Hope to see the solution and identify the problem

  Thank you very much

  OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

  No other information seems more relevant.

  Ideas-

  1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

  2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

  I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

  Denis

• Exported size does not match the size of my work plan?

  Using CS5.5,.

  I created title screens that must be carried into a screen recording program. I create a new document RGB, 72 dpi and 1680px X 1050px. I create my text and graphics and every time that I export as one. TIFF, it looks to export to a different size? I have them open in Photoshop and checked the size of the image and it is not the size, that I put the document up. Looks like that it exports only the part of the artboard that displays, content, because a lot of my work plan is empty. I just tried export as one. PNG with the same results.

  What I am doing wrong?

  Thank you.

  See "Use of work plans" in the export dialog box

• Pavillion DV4: Does not increase the level of battery

  Laptop is connected however increases the level of the battery, even when the laptop is turned off. I already tried a new battery and a different charger, I already tried to uninstall and update the drivers of battery, bios update, update Windows 7 and nothing has worked.

  I would try all the possibilities before you send the laptop to someone else attempt a repair.

  Thank you.

  Seems to be a problem with the motherboard, charging function, but unfortunately my laptop is an old unsecured more.

  I hope that all the other steps described in the post can help others with similar issues.

  Thank you.

• Does not change the size of the font on my request

  Hi guys,.

  I'm asking and I realized that if you change the size of the font of the letters of the device, the application is messy and seems very bad

  How can I solve this problem?

  Kind regards.

  Suggestion of BBSJdev is very good for the people of Visual acuity but if you want that,

  You can use the following code to it:

  textStyle.fontSize: FontSize.PointValue
  textStyle.fontSizeValue: 8 //Give value according to your requirement.
  textStyle.fontWeight: FontWeight.W500 //Give weight also what you want.

• Application window does not retain the size

  I'm running a Windows 10 with the following Adobe CC machine. A few weeks ago I had to move temporarily from ports of entry on my monitor to DVI to HDMI. The max for the HDMI ground was lower than the DVI port. When I went to the DVI port, my Adobe apps keep opening up to a smaller dimension on the left side of the screen. I keep having to resize the app is no longer on the right side and I also have to make it bigger.

  Why the size of the window remembers in the registry?

  Is there a way to fix this?

  Reset preferences https://forums.adobe.com/thread/1567425 can help

  -or #1 in https://forums.adobe.com/thread/2079509 reply

• Deletion of images does not reduce the size of the photo library

  I deleted about one third of my images from my library of Photos (Yes, I went to the "Recently deleted" and clicked on "Delete All") but his 45 GB in size was not afraid significantly at all.

  Is there a hidden method or even the third parties who may release and utilities compact the photo library?

  Is your photo library a library iCloud with optimization of the storage activated?

  In this case, you don't have much control over the storage you use.

  Just to be sure - if you remove photos from albums, did you remove it using 'delete album' or 'remove... photos "?

  The key to delete only delete album - pressing command + delete will delete the library.

  And if your photo library is a migrated iPhoto library or an Aperture, the storage library won't be released, if you delete the photos in both libraries, because the photos in both libraries are connected by hard links.

• CS4 print does not list the size of a tabloid page

  Mac OS: Snow Leopard

  Printers: HP Deskjet 9300

  Pilot: Gutenberg v.5.2.3

  I try to print an image that is 11 x 17 inches.  When I choose the page size, the choices are enormous, but curiously there is no 11 x 17.  I advanced and custom of this size and underlined.  However, when the image is printed, it only prints to a 8.5 x 11 page size.

  What I am doing wrong?

  Franny

  Sorry to hear that you stuck with "legacy" support

  If the Gutenprint driver is all that is available, then that's all you can use - bugs and all.

  But I suspect that MacOS 10.5 driver from HP for the printer would work on 10.6 as well.

• brush cursor does not match the size of the brush I use

  The cursor brush changed recently so that it is much larger than the real brush to which is applied a background or a picture.  I can't tell where or how large the brush will apply.  I have reset the Brush tool and checked the Brush tool options.  All are set to zero except the brush spacing which is 25%.  He is always spacing of 25%.  I recently started using a magic mouse on my iMac instead of a regular computer mouse.  I am using the brush in Photoshop Elements 10 and Photoshop CS4 tool.  What is a mouse problem?

  What version of mac os x are you using?

  See if will System Preferences > accessibility > display and the normal size of the cursor setting solves the problem.

  
  

  
  

  

  or

  System Preferences > universal access > mouse

  
  

  
  

  
  

• Why jpg export does not change the size of my document?

  This is a minor annoyance I noticed once I upgraded to CS6.

  It's the right size of my InDesign document...

  

  So why the dimensions change a fraction of an inch when I export my document of identity as a jpg?

  

  (from Photoshop)

  Well, you can't half a decimal pixel.

  Like - 6685,2 pixels

  So he must work around somehow.

  What if you start a document InDesign using the Web instead of print in the file > new Document

  Then open in Photoshop?

• HP psc 2400 all in one printer does not print the size of the image that I take

  I have the picture appear in Windows Photo Viewer, and then choose to have two 4 x 6 photos.  Then a window of HP is I hit print and it prints a picture of 3 x 4.  Computer of my wife in my home group and use the same printer, and it doesn't have the same problem. It is Windows 7 and I am running windows 7 pro.  It didn't happen when I am running windows 7.

  Nothing to do with MS or Win7 and everything to with the HP print settings

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=303753&LC=en&cc=UK&DLC=en&lang=en&cc=UK