Extended attributes are incompatible - need help urgent please!

Hello Microsoft Forum,

I want to keep this short, as I now have serious problems.
I have Windows 8 Pro, with each update installed.
I was looking through the net by chance, then the messaging with a friend.
My friend has design a logo, which he sent via Skype in a .png format.
When I double click on the logo, the problems started. Everything has become very slow.
The image does not open and only after 5 minutes of waiting Windows Picture Viewer began to appear.
The strange thing is, open Windows image viewer my file .wav file music stored elsewhere, not on my desk (the photo was about all this on my desk).
Image viewer of course could not open the music file.
So I decided to open the Task Manager, but the error described in the title, "Taskmgr.exe - extended attributes are incompatible" error came, does not let me to open the Manager.
This also occurs with most of my programs. I get the same error with Regedit, MSconfig and other configuration utilities, and also some programs starts, as Mumble (Murmur Server can, however).
In fact, all system tools and, more generally, all in need of Admin privilege does not work. Some of these programs give the error message, some simply do nothing at all.
I'm the admin user and UAC is set to the last row (no notification).
In safe mode, everything is normal. In addition, disabling antivirus (ESET Smart Security 6) does not solve the problem.
I followed a few articles I found, which describes the fix from my sound theme on None or default Windows Setup.
I have, however, never changed anything with my theme, the sound was enabled by default.
Setting the sound theme "None" did nothing, just like the definition of the theme options.
Opening to the top of anything with sound (once again a left-click on the icon in the taskbar to bring up the small volume) literally takes ages.
Right click on the sound opening in the bar of tasks and sounds to change the theme, then takes forever.
With forever, I hear, I see the labels and buttons to come with 5 second delay between each.
This is a high end machine with an i7 - 3770K and a Corsair SSD ForceGS, 16 GB @ 1600 MHz RAM and a GPU GTX 670, so normally everything happens at the moment.
The sound is the only part affected the slow opening of Chrome, Explorer, and some programs that do not work, are at the moment.
I'm now writing this getting messages of "program does not" and "Incident at sending information" certain programs, in fact utility built into Windows.
I wish I had of emergency aid, as this is my main work computer
. I'm missing a few hours of serious work because of this bug, which was published in a 'stable' of Windows version.
Edit 1: I forgot to mention that I already tried cmd as Admin ' sfc/scannow' option in Mode safe mode (with or without network, cmd does nothing when open as Administrator without mode safe, does not yet show upward) and in the Advanced Restart public services
Edit 2: I have not installed new hardware or software when this happened in the same State as everything worked.
I really want to reinstall everything, I hope that a solution to this.
Edit 3: One of the programs, which frequently closed (I received a message '(program) stopped working' him) is the host of Console window.
Edit 4: I have disabled all the codecs to start in safe mode, nothing has changed (an article describes install codecs Audacity caused the same problem).
Edit 5: Now after a second attempt in SafeMode as administrator cmd, command "sfc/scannow" reported an error that the problems have been found, but could not be repaired.
Edit 6: I also tried (Cmd as administrator in safe mode with network) repair DISM, could not complete because of an error.
Edit 7: Tomorrow, if I can not find a solution, I'm going to take drastic measures, like restoring to a previous safe point, using the options of recovery and if necessary, even refresh/powerwash/reinstall everything. However, I hope that these measures are not necessary, because they require a lot of time.
I hope that my question is understandable
. Excuse me for my arrogant desire to answer, I normally invite people in the forums, but this made my computer unusable work, resulting in some (financial) problems.
Kind regards
Richard

Hi Richard,

Since the problem started happening when you tried to open the image file that has been sent to you on Skype. There might be a chance that the image file would be infected by the virus, due to which your computer is facing this problem.

I suggest to run the Microsoft of Networking in Safe Mode Security Scanner and check to see if it helps:

http://www.Microsoft.com/security/scanner/en-us/default.aspx

 

Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

I hope this helps. If you need help with Windows, let us know and will be happy to help you.

Tags: Windows

Similar Questions

  • APPCRASH error - then "extended attributes are incompatible" when I try to do something

    My laptop started to lose connection problems and I kept resetting linksys and it would work and then quit again. I had a mistake some time ago when the download of Norton, but it works very well since their. I then downloaded PC health and scanned and do add on errors. Today I really can't do much. I scan with Spyware Doctor and it said no infections, but still I can't do anything. Every error I get says APPCRASH or BXE and I cannot download anything to try to scan or system restore even the computer I only errors. I had to download Perfect Optimizer, but it will not work... just says everything has stopped working, Windows incident reports even stopped working... APPCRASH wermgr.exe said then C:\Program Optimzer/PerfectOptimizer.exe perfect - extended attributes are incompatible... said that whenever I try to do something? Any ideas?

    Hello
     

    It is not recommended to install several security software at the same time. Remove the additional security software, then check. Make sure you have at least a software installed.
     
    Method 1.
    Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
     
    a. follow the link below to start the free online scan:
    http://OneCare.live.com/site/en-us/default.htm
    b. run the malware removal tool from Microsoft.
    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    Method 2.
    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows

     
    We can use the approach 50 / 50 to narrow down the root cause of the problem.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • At the opening of the various programs I get the error message 'extended attributes are incompatible' and "Consent UI has stopped working" in windows vista.

    Original title: extended attributes

    I started getting the following errors with various programs "extended attributes are incompatible" and "Consent UI has stopped working". I tried to do a system restore but get error inconsistent attributes for 'rstrui.exe '. I also had the message to ShellExecuteEX.exe when you try to install an application and even trying to download the Windows 7 Upgrade advisor. Just to check, I tried to run msconfig from the start and even gives me the message attributes. I am running Vista Home Premium with Service Pack 2 installed. Advice please. Thank you, Roger P

    Hi Roger P.

    ·         When the issue started?

    ·         Remember to make any hardware or software comes to the computer before this problem?

    ·         What antivirus application is installed on your computer?

    Method 1:

    You can try to run a SFC scan and check.

    This problem may occur if a system file is missing or damaged.

    You can refer to the method-the System File Checker tool in the following article:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I suggest you to follow these steps and check if that helps.

    Methoad 2: try to run the windows recovery option system restore.

    What are the system recovery options in Windows Vista?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    It could be useful!

  • System hangs and displays that Windows has stopped working with a dialog 'extended attributes are incompatible. "

    original title: Mr

    Since the installation of Spyware Doctor, I've known crashes & Windows problem report has stopped working.

    and a dialog box "extended attributes are incompatible."

    I can't access features, etc., programs and support, help window. Y at - it an easy fix or should I

    request Spyware Doctor? Also cannot access the microsoft games.

    Robarm

    Hello

    try a system restore before the installation of spyware doctor

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    also run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  • Autoruns.exe serious problem, need help urgent please

    Hi, someone there is familiar with this software from sysinternals? Have accidentally disabled key drivers in my laptop with this software and cannot run again. Anyone know how to reverse the errors using this application? Posted full problem in the recovery and repair forum. Have had no response from sys internals forum and really need help. Thank you, Jay

    Try to reactivate the drivers tab drivers doesn't work, so did system restore. Thanks to all who responded, the problem is solved

  • Background fill? Start@last-page?? Need help urgent please :(

    Hello

    Is there a code for a low padding? I have a requirement that each Plan, a signature model is square to the bottom of the page. Please help me

    My script looks like this.

    For example, I put 3 of the Plan, Plan 1 has 2 pages and map 2 and map 3 have 3 pages each.

    My example scenario would be that in Plan 1, signature model is displayed in the page 2 and it will appear in the lower part of page 2 to map 2 and map 3, it will appear on page 3, in both Plans and it will appear in the lower part of page 3.

    Hope my explanation helps.


    Thank you

    Hello

    Depending on your condition, you must use the following XML tag before the signature line in your rich TEXT XML.

    **

    and also you must follow the steps below

    (1) do not use spaces between the tags above
    (2) and you will need to use Session-Break before the tag...
    To do this, you must go the INSERT MENU in your RTF
    and choose a JUMP
    and select SESSION-BREAK, CONTINUED before the xml tag...

    Then automatically 100% you reach your condition...

    Please do what is necessary...

    Kind regards
    Subrahmanyam.

  • Need help URGENT please!

    The word Hello!

    I need to deliver a project tomorrow and I < m experiencing a serious trouble!
    I created all the parts of my project on separate projects Director.
    but when I try to incorporate the "ALL" in a project, important parts exe files (project say partA and partB).

    but whene I import the partA exe file I get this error 'Having trouble readind C:/projectX/partA.exe' - 1!
    no idea please!

    zicco_n wrote:
    > The word Hello!
    >
    > I need to deliver a project tomorrow and I
    > I created all parts of my project on separate projects Director.
    > but when I try to incorporate the "ALL" in a project, important files exe
    > parts (project say partA and partB).
    >
    > but whene I import the partA exe file I get this error "in trouble."
    ' > readind C:/projectX/partA.exe '-1!
    > no idea please!
    >
    >
    I don't think you can import a projector in another. Your main
    options would be

    Launch of a film's Director published (exe) using the command open
    * Open a file dir as a movie in a window (MIAW)
    * Insert a dir in another directory as a linked Director movie

    Each method has its advantages and disadvantages. It is difficult to recommend one method
    without knowing more details of your program. Nevertheless, its something that
    is likely to require a fair amount of work. I think him propose
    tomorrow is going to be a challenge.

  • Problem with services shared - need help Urgent please!

    Hello Experts

    One of my clients has installed a new oracle instance and copied all schemas and data on the new instance.

    Now when they bring shared services, have lost all our supply. None of the projects are recognized by the shared serices and gets the following error message when we try to set up a user

    'xxxxx' is not a recognized shared services project. Please contact your administrator

    Is there something we can do to restore Shared Services to its original state?


    Thanks in advance.

    Kind regards


    Sonu

    Published by: 637223 on January 20, 2009 02:19

    Hello

    If all hyperion services were closed and the database has been moved then in theory you must have run the configuration utility to reconfigure the part of the database.
    This should be done for all databases that have been moved.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Extended attributes are incompatible

    running SBS 2008 R2 SP2.

    1 walk in the matrix RAID 5 failed - replaced ok.

    Cannot run any file system - like event viewer/consoles/disk management

    Windows update fails with 800706BE & 9 c 48

    file system error - 1073741819

    Hello

    The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the Technet forums below:
    TechNet forums

  • That El Capitan 10.11.1 extended attributes are needed?

    That El Capitan 10.11.1 extended attributes are needed?

    Some of them seem to be causing many messages from the Console.  Root, /, I have:

    ls-l | grep-@.

    drwxr-xr-x 4 sbehling 136 admin November 23, 2010 @ Google Earth.app

    drwxr-xr-x @ 2 root wheel 68 30 Nov 17:27 network

    drwxr-xr-x @ 4 root wheel 136 30 Nov 17:13 system

    drwxrwxrwt @ 3 root admin 102 1 Dec 16:05 Volumes

    drwxr-xr-x @ 39 root wheel 1326 17 Oct 18:47 bin

    drwxrwxr-t @ 2 root admin 68 30 Nov 17:27 carrots

    lrwxr-xr-x 1 root wheel 11 Nov 30 @ 17:22 etc.-> private/etc.

    drwxrwxrwt @ wheel root 4 136 Sep 22 2013 lost + found

    drwxr-xr-x @ wheel root 3 102 3 November 2013 opt

    drwxr-xr-x @ 59 root wheel 30 Nov 2006 17:23 sbin

    lrwxr-xr-x 1 root wheel 11 Nov 30 @ 17:22-> private/tmp tmp

    drwxr-xr-x @ 10 root wheel 340 30 Nov 17:42 usr

    lrwxr-xr-x 1 root wheel 11 Nov 30 @ 17:23 var-> private/var

    Extended attributes are com.apple.FinderInfo or com.apple.rootless, or both.

    partnership also had an extended attribute FinderInfo, but I removed it with xattr d

    I don't want to 'fix' things unnecessarily, but I hate my console logs, filling too.

    Suggestions?

    Just because it shows in the Console does not mean that it is a problem. The log messages are not normally intended for the user. Developers use them to monitor the activity of an application. It existence does not indicate a problem either.

    What are the messages and they repeat too?

  • How can I set the scope of the attributes are incompatible error in Windows 8 pro?

    How can I set the scope of the attributes are incompatible error in Windows 8 pro?

    Whenever I try to run a setup.exe file, it gives me this error. What can I do to fix this?
    Help, please!

    WOAH ARE RESISTING NOT EVERYONE!

    THERE IS A MUCH EASIER WAY TO DO THIS!
    Well, I looked for a solution on google (Yes google) for 20 minutes and found four sites that had a bajillion ways to solve this problem.
    Dang, I was wrong.  So, when I dropped, I searched it on youtube, and here's what I got it is frighteningly SIMPLE!
    These are the? indications that I give to you people of the video (easier to look at):
    1 right-click the volume in the taskbar icon, and select sounds
    2. scroll down about 3/4 on the events program: the list and select the option that says Windows user account control
    3. change the sounds: option ( no), and then click OK
    YOU ARE FINISHED NOW, AND THE PROBLEM IS SOLVED... I have no idea how it works, but it doesn't... I AM IN AWE IN FRONT OF

  • Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

    Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

    Hi, Mksethompson,

    What is your model of computer?

    Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

    http://support.Microsoft.com/kb/968279

    Dell issue

    http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

  • After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

    After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

    FAQ: Why am I getting yellow and red lines running through my images on pause?

    Update of El Capitan.

  • Need help Urgent, a Site on the 2 areas, edge of animation works only for a single domain (not the domain clients)

    Hello

    need help with something really strange.

    I create a Restaurant website: www.arkadasch.de

    I test on my server the Site: www.bbaur.com/arkadasch

    As you can see I got the top of the page an element Ede animated.

    When I look at the site on my server www.bbaur.com/arkadasch, you see the element works correctly. You see on the two sites of the 'face' of the apearing name.

    I have download the site now the clients site and the edge of animation is showning only half? Only the name of the left site is apearing and not that of the right?

    I downloaded the same site two areas and it is always the same. My only he is on the right.

    I have delate my cache also.

    Someone has an idea?

    WOW-found the error.

    The name is written 'o'. and the psd file is named «Özden»

    I have change the name of "ozden" to "zden', delate the German symbol 'o'.

    Modify the edge of animation, save again, insert into Adobe Muse and now it works

  • Ink cartridges stuck, need help ASAP please

    Hello I'm writint this because I need help! I get an error message my Macbook Pro on my Photsmart 6520 is blocked and it says to check if all obstructions are bloacking it. Hoever, it's like the 20th time I check inside the printer over and over again. Make sure that everything is in order, however when I turn the printer back on, he will say the same thing and I keep trying to make it work, but it won't! I just got the printer yesterday and I caanot establish it, please help it is urgent.

    In the paper here troubleshooting steps may help resolve the carriage jam message on your printer Photosmart 6520.  If the steps it do not solve the problem, I suggest you contact HP support.  If you are in the United States or Canada call 1-800-HPINVENt, also see details here.

Maybe you are looking for