Extender for hotels

Similar Questions

• How to connect the Airport express as an Extender for airport extreme to El Capitan

  I have a model extreme A1521 airport and a model express airport A1392 and upgraded my OS to El Capitan. I want to use the express as an Extender for the extreme because my old House is long and has thick walls. My problem is that Airport utility will not 'see' the express, regardless of its proximity to the main router (extreme). I tried to move and reset.

  Of course, as soon as I get the utility to see, I need instructions on how to configure the express as a booster for my extreme.

  Any ideas?

  Unplug the Express and put it in the same room as the AirPort Extreme.

  Put power on the Express for a few minutes, then hold down the reset button on the back of the Express for 7 to 8 seconds and release.

  Allow a minute for the Express to restart

  

  Click the WiFI icon at the top of the screen of the Mac

  Look for an announcement of the new AirPort base station

  Click directly on the AirPort Express Terminal

  

  When you click on AirPort Express, the "Wizard" will open and take a few seconds to analyze things, and then see a screen that looks like the figure below, except that you can see your cameras.

  

  Type a short and simple name that you want to call the Express

  Click next

  The installation wizard will take care of everything for you

  When you see the message Setup is complete, unplug the Express and move to halfway between the AirPort Extreme and the area of the House that needs more coverage of wireless signal

  Turn on the Express and you're all set

  Important note... the Express to expand the quality of the signal it receives. About half of the potential speed on the entire nextwork is lost when you extend using a wireless connection between the airports.

  It would be much better if you could connect the Express to the extreme by using wired Ethernet wired, permanent, since there is no loss of signal via the Ethernet cable and there is always a lot of loss of signal through the air, the (thick walls especially) walls, ceilings, etc.

• If on a support contract extended for XP and 2003, will we receive MS16-077 as part of this support?

  * Original title: MS16-077

  Hello

  If on a support contract extended for XP and 2003, will we receive MS16-077 as part of this support?

  Try to determine what to do if the netbios disabled is not an option?

  It is a forum for specific consumers. If your TAM can answer your questions, you can find appropriate in the partner-online https://partnersupport.microsoft.com/ forums support

• I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else).

  Hi all.

  I just installed windows XP Pro on one of my computers. Now when installing, it showed me the main partition C and another extended partition (which was very small). Now windows gave me the option to install Windows on the C partition and it me has failed to use the extended partition, he said is reserved for windows. Now my problem is that it does give me an option to create a new partition (except on the extended unallowed was D). I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else). I want only the OS on C. How do I do that? The PC has a single 79GB hard drive

  Hi DextrousDave,

  Refer to the article below to learn more about partitioning during the installation of Windows XP.

  How to partition and format a drive hard using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

• Media center immediately crashes when I try to add the extender for the Xbox 360

  I am running Windows 7 Home Premium.  I try to add the extender for the Xbox 360 to Windows Media Center. When I go to Media Center tasks and add an Extender, Media Center crashes immediately after I enter my Xbox console 8-digit code and click Next.  I have disabled the firewall of the router and firewall windows without success.  Restart the computer and the Xbox has not helped either.  Any suggestions that I can not yet put in place the Extender?

  Thank you.

  Hi Eric,.

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you have trouble connecting Xbox 360 extender for Windows Media Center.

  I will certainly help you with this issue.

  Here are some methods that you can try in order to solve the problem.

  Method 1: Disable the antivirus software and make sure.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Clear the Xbox 360 console system cache and check.

  http://support.Microsoft.com/kb/971755

  Method 3: Reconnect to Windows Media Center

  In the event that something happened to your connection, try to disconnect and reconnect to your Windows Media Center computer.

  To disconnect and reconnect to Windows Media Center:

  a. in the Xbox Dashboard, go to My Xbox and open Control Panel.
  b. Select computers, Windows Media Center.
  c. Select Disconnect.
  d. Select the installation program and follow the instructions on the screen to complete the Media Center Windows Installer.

  For more information, see the articles.

  www.Microsoft.com/Extender/Help

  Here is a demo for an Xbox 360 as an Extender for Windows Media Center unit setting http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/help/Extenders-firewalls.aspx

  Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• I need to install my Adobe Photoshop CS6 extended for mac (was: I)

  I need to install my Adobe Photoshop CS6 extended for mac os on my new computer. My last computer is broken and cannot acess nothing on it more. How can I do this?

  Please see this link:

  Download Creative Suite 6 applications

  I hope this helps.

  Concerning

  Megha Rawat

• Hi, I bought a new laptop and I would like to install Photoshop 5.5 Extended for the new laptop computer. Something to consider before you begin to install?

  Hi, I bought a new laptop and I would like to install Photoshop 5.5 Extended for the new laptop computer. Something to consider before you begin to install?

  The reason is to avoid any inconvenience. What do I need to uninstall Photoshop beforehand?

  Thanks for the tips

  The mobile fact have separate start-up and data readers?  If so and the boot drive has limited space, you may want to consider relocation of things like bridges on the data disk cache.  I can't think another thing to consider from the start, however.

• Transfer the Software Photoshop CS6 extended for Windows Edition student from a Windows PC to a Mac

  I bought Photoshop CS6 extended for Windows Edition for my PC online student year last of Curry of PC World. I was told, at the time of purchase, that I would be able to transfer this software from my PC to a Macbook. I've now bought the Macbook and would like to transfer the software on my old Windows PC on my new Macbook. Please could I have assistance for that purpose. thank you!

  You don't mention who told you you can transfer the software, but I suspect it wasn't someone from Adobe.  Versions are platform-specific, so there is little chance of the installation of the version of Windows on a Mac without the use of a Windows emulator any.  Since it is CS6, you have the possibility to request an exchange of platform.  See the following...

  Product change or the language platform
  -----------------------------------

  You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

• Warranty extended for Portege Z930-8113

  Is extended warranty (part number: EXT103I-V) available for Portege Z930-8113?

  In my opinion you should take warranty on Toshiba official page as news http://www.toshiba.eu/services/warranty-extension/
  Otherwise contact the nearest authorized Toshiba service provider in your country. They can help you and provide accurate information.

• Configuration error when you try to set up my Extender for Xbox 360 installation

  I bought a new belkin wifi router, but library ready to run through my xbox 360, although it worked fine with the old router. I use only Windows Firewall with my Virgin firewall security and own routers firewall turned off, but get the same error in config to come. Am I missing something? I believe that I opened all the ports, as requested but not joy. I'm thick, or have I missed something?

  Hello

  1. did you of recent changes to the system before the show?

  2. What is the exact error message you get?

  Method 1:

  Follow the link below and follow the steps and check if it helps.

  Using Windows Media Center with the Xbox 360

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center

  Method 2:

  Follow the link below and follow the steps and check if it helps.

  Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  In addition, check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Let us know, it helps.

• Problems adding our HP Media Extender for Windows Media Center

  Hello, we have about 15 HP Media Extenders (MEX) laying around the place, connected to 2 x Win 7 computers laptops and 1 x Vista desktop, all running Windows Media Center.

  Previously, the MEXs all the connected without problems on the computers in the library, but for some reason, they do not want to connect now.  What happened was I uninstalled all MEXs on the Vista computer as they were all saying disabled and did not know how to enable them again, so I thought that all delete and just add.

  But the thing was, I did not add that Vista Media Centre, outside of the Xbox 360.  But I managed to add a bit of MEXs in other media Centres.  I also noticed there is a Media Center W7 which seems to be able to add when the other two cannot.  The error messages I received were: "an error occurred during the configuration of your computer with the Extender" or "Unable to Find Media Extender.

  I'm not under a firewall on all computers, or the other.

  Sorry if I missed any information.  Thank you for your help.

  Hello Robert,.

  Windows Media Center should look at the file's existing database of the same Media Center once you have disabled the feature and he re-enabled.
  You can view the troubleshooting in this thread for more information on how to repair a corrupted database file Windows Media Center:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/WndOws-Media-Center-will-not-open-the-movie/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

• Laptop when extended for use on a projector have a reddish tint

  Original title: Portable, extended desktop reddish?

  We use a computer laptop w/vista for several months, this Sunday when we connected, when the post office came on the projector, it was reddish (almost looked hidden), you could see the picture and everything, but with a strong tint reddish. I tried to post the same on both, but with the same result. The laptop screen is fine, I tried to reproduce the screen with no luck. I tried to change the resolution on the desktop extended with no luck, just change the appearance. We use powerpoint, but no matter what slide us looks the same. The dvd works well on the projector, and when he starts the colors are ok. I'll try a 2nd laptop on it this afternoon, but I don't think this is the projector. I think that a parameter has probably changed. Any help would be appreciated. Thanks, Bruce

  Hello

  Found the problem after a few game. Pins of the connector on the projector, a few of them seems to be done back up a bit. If you slightly turn it works.

  Thank you. Bruce

• Video error, XBOX360 as extender for Vista MCE Sp2

  Guys,

  Thought I would ask here that I drew a little white elsewhere.

  I have a Vista MCE (Home Premium) that works very well I have not topics with that at all. I also had an XBOX360 connected as an Extender also with no problems.

  Some time ago (8 months or almost) the Extender began to display a message when you try to read a recorded program (dvr - ms) or watch live TV.

  Now, at that time two things changed; the graphics card in the MC is dead and has been replaced by another card (GeForce 9400-> GeForce 210) that prompted a reactivation of Vista.

  An update to SP2 was also at the same time.

  I had no time to really watch this angry (a newborn that makes you...) But I looked at a number of positions elsewhere and did some research:

  1. not a permissions problem. At the start of MC on the XBOX it displays icons with the thumbnails of the recorded shows. Users have total control over the directory of recorded TV.

  2. firewall issue. the MCE PC has had its firewall turned off for the duration; and I've tested that I can connect to the MCE PC on all ports listed; Curiously, a handful do not seem anything it either listen 10244 and 8554 at 8558.

  3. I tried to connect a new xbox (the original has been deployed in the bedroom for the sole purpose of extender; the second is for the games) and it has the same behavior.

  3 remove and re-add the bar end several times.

  4. Curiously, I can play the videos of sample included with Vista MCE without problem.

  In short, I wonder if it's a codec issue or some kind of DRM problem (caused by the reactivation).

  Don't know where to go with this one. I'm fairly certain that I've covered all the obvious bases.

  Oh a few last bits of useful information:

  1. There is no antivirus installed on Vista MCE
  2. the XBOX and the PC of MC are hard cables; that is, no Wi - Fi.
  3. I can play records (dvr.ms) on another PC (Running vista Ultimate edition) to share on the network. (Have yet to try to connect the xbox to the second PC and saw this work; something I'm considering)
  4 Windows Update is enabled must so up-to-date with all the patches.

  Lost my answer somewhere here...

  I solved this problem, and Yes, it was a long time to come... I solved this with a reinstallation of Vista.  A tad drastic and as fustrating as it would have been nice to understand the nature of the problem.  Tip to solve if we consider that Media Center is "production" so to speak.

  Everything is now running as it should.

  The question of crackling was a Kipper has been resolved by a BIOS update.

• Windows Media Center Extender for Xbox 360. "Configuration error".

  My setup is step 120 failure. I've tried EVERYTHING. There is never a certificate to remove. I disabled my firewall, tried to join a different workgroup. I tried every fix I could find on these forums and forums of windows 7. One thing that I notice it is whenever I restart the installer on xbox and get a key of 8 different figures, when I go to the installation on the PC it always shows the last digits of the key I tried initially the installation failed. It won't let me not uninstall the Extender, there just a configuration option. That makes me crazy is there no solution for this? My God, it's been a year!

  Material

  Windows 7 x 64 ultimate

  Belkin F6D4230

  Xbox 360 has completely updated and on live.

  CactusJones

  Yes, it's been a year since I've tried last. I was avoiding reinstall them. I just installed a fresh copy of Windows 7 and got it up and running instantly. I think that the problem of errors where there is no group policy on the machine and it was impossible to create a certificate. Problem solved.

• 1290 error when you try to install Media Center extender for X 360 in Win7 Pro x 64

  OK, here's one for someone who knows Win7 Kernel internals.

  I am trying to connect my XBox 360 to my PC MC with Windows 7 Pro x 64. When I type the code 8 digits of the Xbox in Media Center, I get an error "Setup." Check the system error log, I found that it was a failure of the Media Extender service to start. Stop of is an error 1290, that says "service start failed because one or more services in the same process have a service SID inconsistent type parameter.» SID type has something to do with the core permissions or somesuch. WAY out of my League.
  The only thing that I could find online is that this error occurs sometimes in what concerns the time Service Windows, and that a registry edit to fix it. I tried a similar "fix" on this service registry entry, but it had no effect on this error, so I changed the return register.
  Someone has an idea of what I might try next? I did all the standard things that are recommended for problems of Media Extender, including uninstalling and reinstalling all components of media. Re-installation of Windows is NOT an option at this stage, this computer is used by all my children, and there would be a mutiny if he became unavailable for a long period of time (especially for as "lame" reason like this). I'd really listen to my media to my XBox. I hope that someone with some knowledge of the works of this service lies this question one day.
  Thanks for reading.
  "Bottom in Phoenix.

  Hi Ken Nichols
  You can perform the steps below and check them if they help you to solve the problem-
  Step 1:

  a. click on start toreduce this includes this image, type regedit in the Search box, and then click regedit.exe in the list of programs .

  If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  b. Locate the following registry subkey and click on it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mcx2Svc

  (c) in the part of details, right-click ImagePathand then click change.

  d. in the value data box, type the following registry value, and then click OK:
  %SystemRoot%\system32\svchost.exe k fontcache

   

  e. make sure also that the ServiceSidType is set to 1.

  f. exit the registry editor and then restart the computer.

  EDITING REGISTRY WARNING:
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Step 2:

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the Media Center Extender Service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

   

  I hope this helps.