Extender installation does not, can now access the internet

Similar Questions

• Reinstalled XP, but now I can't access the internet

  Hello

  I recently reinstalled Win XP on the same computer on which this copy has been installed.  The computer will have access to our home WiFi network, although he does not always see other computers on the network.  Worse, is that when I run IE6 Service Pak 2 (the version that is installed on the original disc), I can pull up the MSM homepage which will remain for about 15 seconds, then I get an error that IE has to close.  I think it boils down to "I can't access the Internet."  Tried everything that I can think and followed a number of suggestions on this forum.  I've seen comments that I need the update to Windows Service Pak 3 here, but, of course, I can't that without access to the internet.

  Any ideas?  Thank you, Susan

  A few thoughts...
  -from another computer...
  -Make sure you get all the drivers for your computer from the manufacturers Web site
  -Download a form any anti-virus (MSE for example)
  -Download SP3 from here: http://www.microsoft.com/en-us/download/details.aspx?id=24

  Once you have done this, I hope you can get on the Internet. Once there, get all your updates.

  I hope this helps.

• After three days of my 3g modem works fine, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped.

  Last week for mobile connection, I bought a 3G modem on my laptop. After three days, works very well, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped. It occurs when I try to establish a Dial-Up connection.

  I searched the Internet and found a section of troubleshooting on the Microsoft Web site. However, although I have followed all the steps, the error continues. I've already uninstalled and again installed the program, does not. I use Windows Vista Home Premium.

  What should I do now?

  original title: 3 G Modem

  Hello

  I suggest you to contact your internet service provider for assistance.

• I can't access the internet with IE 11 on my PC so I would like to download Firefox on my laptop and install it on my PC. I have been using Firefox on my laptop.

  I use Mozilla Firefox on my laptop and I would like to install it on my PC because Internet Explorer 11 stopped working. I can't access the internet so I downloaded the installer of Firefox on my laptop and saved on my PC. It initializes, but unable to connect to the internet to retrieve the program. How can I work around this problem and install your browser?

  Unfortunately, it did not work. I tried downloading earlier and it cannot connect to the internet. I need the program to install. I reset IE 10 as their recommended technical support and I even tried to reinstall, but that no longer works. I'd rather have Firefox

• I have a laptop with Windows XP that show an icon connected to the internet, but I can't access the internet.

  Hello

  I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.
  Thank you
  original title: wireless internet

  Do you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.

• I can't access the internet with any browser without proxyfire

  I can't access the internet with any browser, without proxyfire software & internet option checked to see if the proxy server is marked or not. I think I checked everything I know now I will be honerd if someone help me with this problem.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  3. what version of Internet Explorer is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 3:

  Try the following steps to turn off the Proxy connection and check if it works.

  Follow the steps to disable the proxy:

  a. open internet explorer.

  b. click on tools and then click Internet Options.

  c. click on the Connections tab, then click LAN settings.

  d. turn off the server to use a Proxy.

  e. click on apply then Ok to save the changes.

  Hope the information is useful.

• I try to enable Microsoft XP on a laptop and can't access the Internet to activate.

  I try to enable Microsoft XP on a laptop and can't access the Internet to activate. I have 8 sets of code available, but the phone activation computer said that the codes were not recorded. I need to save this software to get this laptop for my daughter. I can't download and upload diagnostics using my computer. All I get is the splash screen, click the user, and then it will activate the windows screen. When I can't activate online, it suits me and turns off. What else is there to say?

  Of course, you can get online with something :)

  Download the tool on your current computer and transfer it to the affected - save the output in a Notepad TXT file and copy to your functional PC, and then copy the ocntent you your answer.

• I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green.

  I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom?

  original title: IPConfig and lack of internet access

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers.
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  =========================  IpConfig ===========================

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• Using Virgin go 2 broadband, why am I not allowed to access the internet?

  I want to use the Virgin @ go broadband on my laptop, why am I not allowed access to the internet?

  There could be several reasons why you can't access the internet. Are you getting any sort of error message? If so, what would you say?

  He has already worked, or is it a new product?

  You might consider posting your question in the forums of Virgin Mobile here:http://www.virginmobileusa.com/mobile-broadband/

• Can't access the internet, the error message: runtime error! Windows/system32/spoolsv.exe

  I noticed my extra long taking computer to start from a few days ago.  I can't access the internet until the second message appears after the error message.  This message says "spooler subsystem app stopped working and was closed".  I have Norton 360 protection and my OS is Vista Basic.  I did a scan antivirus with no problems detected.  The only time that this message is when I start my computer.  Help!

  Hi DawnKemm

   

  Method 1:

  You can check if the problem occurs in safe mode. In safe mode; you have access to only the drivers and base files.
  Check out the link to start the computer in safe mode and then check-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2:

  If you are not faced with the question in safe mode, then you can check in a clean boot state. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Error message: "Lightroom can't access the internet, check your firewall and security applications. »

  Hello.  I have an Acer Aspire under Vista 64-bit desktop.  I have an error message when I try to export photos from Adobe Lightroom on my zenfolio online gallery.  The error message reads:

  "Lightroom can't access the internet.  Please check your firewall and security applications (Little Snitch, Norton, Zone defense,...) and add exceptions to the need to allow lightroom to connect to zenfolio.com. "

  I, to the best of my knowledge, did in the Security section of the Control Panel, adding to the list of exceptions in Lightroom.  However, it did not connect.

  I'd appreciate any help on this!

  Hello.  I have an Acer Aspire under Vista 64-bit desktop.  I have an error message when I try to export photos from Adobe Lightroom on my zenfolio online gallery.  The error message reads:

  "Lightroom can't access the internet.  Please check your firewall and security applications (Little Snitch, Norton, Zone defense,...) and add exceptions to the need to allow lightroom to connect to zenfolio.com. "

  I, to the best of my knowledge, did in the Security section of the Control Panel, adding to the list of exceptions in Lightroom.  However, it did not connect.

  I'd appreciate any help on this!

  It might be best if you find the solution of Adobe Lightroom forum. After all, the forum is dedicated exclusively to the Lightroom application.
  Here is the link to the forum (there is more than one available forum.)
  http://forums.Adobe.com/community/Lightroom

  t-4-2

• I need save a compleetly on flash or hard drive website and study it offline in a place that I can't access the internet

  I need saves a Web site completely on my flash or hard drive and study it offline in a place that I can't access the internet.

  Usually, you can try to access the menu of Firefox and click Save under...
  Make sure the full web page is selected for the page and the major part of its dependencies will download.

  In any case, if the Web page is just a web or a different kind of canvas where you don't need to click anywhere to see it as you want, just print the pages you need in PDF.

  To do this, you can download a free PDF printer, like doPDF or PDFCreator. Just to get Firefox /... print and select DoPDF or PDFCreator as printer. Follow the steps on the screen to convert Web page to PDF, where you will be able to move it and read it with the more comfort you can imagine. Don't forget that the second computer should have a PDF reader, like Adobe Reader, SumatraPDF or Nitro PDF, all free.

• My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

  My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

  original title: internet connection.

  Hi vonhatten,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you try to connect to the internet?
  3. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• I can't access the internet. I get a message that I do not have a network card.

  I can't access the internect in my Pavilion s3707c slimline, message window: do not have a network card, replace a

  Message: no netwrok (from my HP pavilion s3707c) adapter, needinstall it and configurad, where and how can I buy a new installation? can I buy a USB WiFi dongle for instead? What kind?   Pls help, yourhelp are much appreciated.

  Hi eddy Chow.

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         It was working fine?

  Follow the steps in the article.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  For reference:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3882331

  If the problem persists, contact HP support for more help and information.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• Load firefox 3.6.14 and now can't access the internet. Computer restored to the previous version works now. 3.6.14 I tried again and the same problem, any ideas?

  Using windows 7. As soon as the update of firefox, I can not access Internet. I tried Internet Explorer works well. I have restored the previous computer Firefox and it works fine. Tried the update again and the same problem can not access the internet.

  This is usually caused by a firewall blocking the new version of Firefox. For more information, see https://support.mozilla.com/kb/Cannot+connect+after+upgrading+Firefox