Extension NI_Flow_For does not insert good end specified in BlockEndStep step

Hello!

I need expand the capabilities of my sequences.

So I buil a new type of step (My_For) that I have combined with the type of NI_Flow_For I then added properties to meet my needs.

I did the same with the step of NI_Flow_End type (My_End).

Two step definitions have been created in MyTypes.ini.

In the definition of type 'My_For', I put the "BlockStartTypes" to the empty string (""); and 'BlockEndType' to 'My_End '.

In the definition of type 'My_End', I put the 'BlockStartTypes' to 'My_For '; and 'BlockEndType' to the empty string ("").

Then, when I insert a "My_For" step in a sequence, it creates a "NI_Flow_End" step, but not a step of "My_End!"

If I delete the step of "My_End" created automatically, and Drag ' n drop a "My_End" below the "My_For" notch, it works!

So I guess that the problems come from the lower level OnNewStep which is a bad thing, but I don't see what is wrong in the properies I put...

Any idea?

The lower level custom OnNewStep is programmed to insert the step of the 'end '.  Must NOT be smart enough to know the specified end block and insert this step.  You must write your own code lower level OnNewStep that inserts end of 'my_end' block stage where you want and configure properly (half of the problem is also that when you insert pairs of steps, you have the steps from beginning and end must be configured specially, not only inserted.

Tags: NI Software

Similar Questions

  • error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

    Hello

    I get this error when you try to run the sample of cards on the corrugation Simulator:

    Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

    The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

    Someone else have this error and know why?

    PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

    PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

    Thank you

    The two directories (in the extensions directory and maps project directory) have permissions to 777.

    But you gave me an idea...

    It turns out that simply by putting

    "Packages".

    in setting output wasn't enough, I need the full path

    for example: "/ Users/username/RippleSites/Maps/packed."

    and presto, now it works!

    Thank you!

  • I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

    I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

    Hi edwards39572619 ,

    Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

    Let me know how it goes.

    Kind regards

    Christian

  • Why the function "Insert an Image" does not insert the code at the location of the cursor?

    I mainly work with php files and I'm still working in code view only.  I am editing the php files that I wrote using a different code a few years ago Editor.  I place the cursor to the place in the code where I want to go the image tag and use the menu "insert an Image".  The code is then placed directly under the < body > tag.  It is always placed in the same place no matter where I place it in the code.  Can someone tell me what is happening here?  Thank you.

    Not sure why it does not insert the image where the cursor is, but my workflow is much easier. I mainly work in code view and I will drag the image from the files Panel to where I want to in my document. Simple

  • Extensions Manager does not come with Adobe first CC trial?

    Hello

    The extensions Manager does not appear with Adobe first CC of the trial?

    I like to add the plural eyes 3, can someone help me?

    Thank you

    Georgia

    Please try: https://helpx.adobe.com/x-productkb/global/issueswithinstallingaddonsCC2015.html

  • The extensions Manager does not see Adobe Photoshop CC 2015?

    96EESahc43k (1).jpg

    The extensions Manager does not see Adobe Photoshop CC 2015. All applications using ustanovliny creative cloud

    That's right, that it is no longer supported. Please refer to this article: Adobe Exchange

  • The extensions Manager does not in 2015 CC

    Just installed CC 2015, but the extensions Manager does not work.   I've deleted and reinstalled and it still does not work.

    Hi Alfredo.

    See a related discussion on the same topic: Re: Extensions CC2015 gone

    I heard the team there are some problems with the Add-ons and the command line tool, and the team is trying to solve. I'll let you know as soon as I have an update.

    See Adobe Exchange for official communication on the extensions Manager.

    Thank you

    Devendra

  • The CC extensions Manager does not see .mxp

    I can't open .mxp in the CC on Mac OS 10.8.5 extensions Manager. The CC extensions Manager does not see the files.

    I did the update and all the steps: http://helpx.Adobe.com/Flash/KB/install-extensions-Flash-Professional.html

    CC extensions Manager can't mxp extensions that have some limitations and have been deprecated in CS6. You must use the CS6 extensions Manager to convert the mxp zxp extensions extensions. There is a menu item for it. If you have not installed Extension Manager cs6, you can get it from http://www.adobe.com/exchange/em_download/em6_download.html .

  • I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

    I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

    Adobe Audition: For Macintosh

  • Help my extensa 4420 does not illuminate

    I have a laptop Acer Extensa 4420 2009, that does not illuminate.

    He sat for 4 months unused. Don't work on battery power (15 min max)

    Finally bought a new battery.

    When I press the button start is there no response.

    I checked the power supply: good 19.1 V dc

    I have a new battery.

    When I plug in the power supply, I get the fire A GREEN on the incicator of battery charge.

    I tried the static reset: remove the battery & power supply, press on & hold start for 30 seconds.

    I deleted & reset memory modules RAM (2 x 1 GB).

    I opened back and reinstall all connections of Ribbon & connectors, hard drive etc.

    Last fall it's intermittent start up, I replaced the cmos battery, that fixed.

    Could use some suggestions where to look next.

    Mike D

    Problem SOLVED:

    I did more reading. Find more on the reset procedure.

    (1) I unpluggged the battery & left overnight.

    (2) in a hurry & has held start button for 1 mniute.

    (3) to replace the battery (new) & start-pressed: the UNIT POWERED UP!

    I am trying to load updates.

    Microphones

  • Builder 3 extension debugging does not work

    Hello

    I'm developing an extension with extension 3 for Indesign CC (9.2.1) builder. The application runs, but I cannot provide debugging.

    I am using Luna Eclipse (Eclipse 3.6 does not work too) on Windows 7

    It is the ID of the extension in my manifest.xml:

    "< ExtensionList >.

    < extension Id = "my.extension.name.extension1" Version = "1.0" / > "

    < / ExtensionList >

    "

    It's my .debug file (I put in my root folder):

    "<? XML version = "1.0" encoding = "UTF - 8"? >

    < ExtensionList >

    < Id = "" my.extension.name.extension1 extension"/ >" "

    < parameter Listehotes >

    < host name = "IDSN" Port = "8088" / >

    < / parameter Listehotes >

    < / extension >

    "< / ExtensionList >.

    I launch the extension in eclipse with "debug as" and creation in Indesign. Then, with Google Chrome, I the url: localhost:8088, but it says that the page is not available.

    I checked the 8088 port is open.

    In localhost, I installed IIS but can work in the default port.

    Here is the CEPHtmlEngine log file:

    "2015-01-21 10:30:36: LogLevel INFO: 1.

    2015-01-21 10:30:36: ERROR occurs when getting debug port. "< unspecified file > (8): name of the element that is expected.

    I don't know what to do. Can you help me? Thank you

    Here are a few suggestions, you can try

    #1. Change your debug on port 8899 for example

    #2. Add this line to your main.js, well that its not mandatory with CEP 4.2 or later

    Window.__adobe_cep__.showDevTools ();

    #3. Make sure your .debug file is created using the command line tool and ends with the line break.

    #4. Double your .debug file is root of the extension.

    Mac

  • New Firefox v. 29 - Extension 'Cult' does not show in the main toolbar

    Just got the latest update of Firefox this morning. I used to have the extension 'Sun Cult' on my 'add-on bar' and expected to see this extension in the main toolbar now. However, it is not. When I open "Customize", I can't see the extension, but is not on the toolbar main but UNDERNEATH. I tried to go back by dragging and dropping, but it will not move at all. I even tried to drag to the new box 'Menu', but it still does not move. This is kind of stuck in limbo. Can someone help me get this extension in the main toolbar? Thank you!

    On which toolbar is this icon currently positioned if check you through the extension settings (display > display investment)?

    Have you tried to put the button on a different toolbar via its settings?

  • Installation of extension Spinner does not work

    I am trying to install the user of Spinner to WebWorks interface and I get the following error in the console to ripple Web Inspector:

    TypeError: 'undefined' is not an object (evaluation of "blackberry.ui.Spinner.open")

    I followed the instructions on the following site:

    https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/Smartphone/SpinnerControl

    But the site indicates that these instructions are "is no longer up-to-date" and that I should use:

    https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/using_the_js_extension_in_your...

    which States I need a jar file.  There is no jar file in the file list.

    Please help to explain what is needed to make the user of available Spinner interface:

    -SDK WebWorks 2.3.0.9

    -Waving 0.9.0.16

    -Windows 7 64 bit

    I think that the ripple does not support extensions, try using a Simulator or real compatible devices

  • 4.0.4 Tranfer of extension unit does not

    Call handler created with the extension and for standard hours configured to forward to a Subscriber no extension. Other disabled transfer.

    When I call the call handler it will Manager wishes, even if the call forwarding settings Specifies not to go to wishes. I said yes, "sound to the Subscriber to this extension" and this setting does not take effect for hrs standard or closed. He always goes to the host Manager.

    Removed and added the Manager with the new name, still the same issue. ContactRule.Extension specifies the correct setting for the standard rule.

    OK - do not work what you do, it's not supposed to. If a call to the front by another extension directly into the unit, the unit will automatically ignore the rule of transfer on the Manager or the Subscriber and get right to the home. This prevents the window "transfer buckles" If a call forward and the unit try to call the phone that transmits etc. until all ports are chewed and dirt hit system.

    You can get around this by making the different a couple things I talk about in the paper 'the audio text in the unit applications' on the Documents page of the site http://www.CiscoUnityTools.com . It is just the channel manager a 2nd - the flag of the 'transfer of skip rule"is used only for the first Manager/Subscriber the call strike in unity, after that she will make the transfer on the next Manager to what happens. That's how I'd do. You can also have blank greeting on the Manager and the welcome message after action defined for 'attempt to transfer' for himself. It's a little more dangerous but it only invovles a Manager. I would use two handlers for it, however...

  • Location.Replace does not go to the specified page in the BlackBerry browser

    I have a Web site that contains a database of bands and places. Blog visitors can consult the database and view schedules of when and where a band plays. The search results can be filtered based on one or more search criteria (the name of the band, genre, place name, city, etc.). http://atlbands.com

    I decided I would make a printable version of the mobile device of the search page. This page is taken down to the bare bones. I got rid of all the images and a pop-up calendar. The search page contains a number of drop-down lists SELECT HTML, which are populated by php/mysql. After making the desired choice, a "submit" button calls a javascript function that produces a URL and use location.replace to redirect to a new page.

    The new page parameters, runs a query and returns a list of the annexes. The page works as expected in IE and Firefox, as well as on an iPhone. It does not work on BlackBerry. I used the BB Simulater and I can see what is happening.

    The search page is http://atlbands.com/msearch.php

    Is an example of a URL that can be generated on this page

    http://atlbands.com/mresults.php?band=&genre=&venue=North%20River%20Tavern&city=&ZipCode=&County=&da...

    What is strange, is that this URL is generated on the BB,

    http://atlbands.com/mSearch.php?band=&genre=&venue=North%20River%20Tavern&city=&ZipCode=&County=&day...

    As you can see, the URL points to the msearch.php page and mresults.php page. Of course this page expected not all parameters, so that the user sees just the page reset, with all their selections deleted.

    I tried to use location.href and location.assign, but they do the same thing. The funniest is that the regular search page works on the BB (although it is not very easy to navigate on a mobile device).  The difference is that the search page and the results are on the same page. The results of a search using a small screen of BB, I wanted to have all the space available to display the results and takes all the space displaying the options SELECT again.

    Is there a known problem regarding the redirection on the BB page, or have I made a mistake in coding?

    TIA

    Dave

    atlbands.com

    Is there a reason that you use javascript to make sending the form?

    Well, there is certainly no good reason. You're right, using the standard post method is all that is necessary in this sceario, solves my problem. Thanks a lot for your help. I have renamed the page http://atlbands.com/mobile.php

Maybe you are looking for