External 2.5 "HDD (PX1279E - 1-12) does not work

Similar Questions

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• Satellite T135 how to enter Safe Mode and HDD Recovery if 'F8' does not work

  Hello everyone

  I have a laptop Toshiba Satellite T135 and it crashed recently. Since then, whenever I turn it on, startup repair is enabled automatically. But it does not fix the error.
  I tried to solve the problem with the system restore, but that no longer works. So I think I have to go through the procedure of HARD drive recovery.

  The problem is that I have a lot of data on my laptop that I must first of all safe. I wanted to do it via Safe Mode that supposedly, I should be able to enter by pressing "F8" at initialization, when the Windows logo appears. But my laptop is not responding when I press F8, but rather getting a sound alert, if I press the button for a long time.

  Apart from how to enter safe mode by pressing F8 during initialization does not work, I have a second question: Toshiba Recovery Wizard is the equivalent for the HDD recovery procedure? It is the only similar option that I could find...

  Thank you very much for your advice.

  Hello

  The recovery of HARD drive installs the image of Toshiba.
  The image is the package that contains the operating system, drivers and all the tools that have been installed on the first day of purchase; simply said; using HARD drive recovery you would set the laptop back to factory settings.

  You want to save the date before you install the operating system once more?
  Well, remove the HARD drive, put this in a USB HDD enclosure and move the file to the HARD drive to another computer.
  It would be the best way to get the file save.

• Try to include external jar in Eclipse IDE, but it does not work

  Hello world

  I try to use the BB for Eclipse plugin.  I saw the other posts in the same direction as mine, but nothing seems to solve the problem or the person was referring to an older version of the plugin.  I try to include a jar named J2meMap_lib_cldc11.jar.  Here's what I've done so far:

  I created a new Blackberry project called J2MEMap.

  I right-click on the project and select Properties.

  I go to the Blackberry project properties. Click on the Application tab.

  Under Project Type, change in library.

  Then, I go to the Java Build Path.

  I go to the library and add the jar as an external library file.

  Click OK.

  Then, I create a new Blackberry project named MyApp.

  For this one, I'm doing a moped.

  In the Java Build Path, I add the J2MEMap project as a project dependency.

  First thing I notice is that MyApp has compilation errors because he doesn't seem to find the jar file in the other project.  If I look in the Console of the Blackberry manufacturer, I see the following error when I Isaiah to compile the J2MEMap project:

  C:\programs\opensource\eclipse\plugins\net.RIM.Eide.componentpack4.5.0_4.5.0.16\components\bin\launcher.exe C:\programs\opensource\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\bin\rapc.exe-silencieux import =...... \.. \.. \.. \.. \programs\opensource\eclipse\plugins\net.rim.Eide.componentpack4.5.0_4.5.0.16\components\lib\net_rim_api.jar;...... \.. \.. \.. \.. \programs\opensource\j2memap\sdk\cldc11\J2meMap_lib_cldc11.jar library =... \J2MEMap\J2MEMap warnkey = 0 x 52424200; 0 x 52435200; 0 x 52525400 - sourceroot = C:\Local\develop\eclipse\workspaces\psu\J2MEMap\src C:\Local\develop\eclipse\workspaces\psu\J2MEMap\bin
  Error! : not found of course
  CAP has failed for the project J2MEMap

  Previously, I did not receive this error, but I began to acquire a reason any.  I am able to generate the Midlet example that comes with the JDE and deploy and run on the Simulator.  For some reason, I can't get libraries to work properly.

  Thank you

  Eric

  In fact, I thought that I'm answering my own question in case someone else has the same problem.  In the library project, I had to go to the project properties and go to the Import/Export, and then select the external jar as one of the elements that must be exported.

  Thank you

  Eric

• Backup - recovery deleted HDD - A300-1ID satellite does not work

  Hello

  Hope you guys can help me.

  I have a problem with my labtop and formatted the hard drive... but there was the HDDRecovery. Luckly (I think..) I save this file in my other pc as a backup.

  Now the problem is: even when I put the HDDRecovery in the same exact place where it was originally it don't work...

  Theres a way to fix this?

  Thank you...

  Hello

  You see, there was a hidden Toshiba Recovery utility that you deleted during formatting hard drive. Folder HDDRecovery you doesn't help you.
  You can order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] price of Toshiba or get disk Windows Installer, all the drivers are available on [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• External microphone does not work - HP G62 Windows 7

  Hi all

  My microphone works fine. Also, if I plug in a headset, his mic works fine as well.

  However, I tried to use an external microphone like this:

  

  but it does not work on my laptop HP G62, although it works perfectly on a PC.

  I'm running on Windows 7 Ultimate.
  Any tips?
  Thank you

  heheheh... Sorry, I was wrong! I've changed the mic to stop rather than switch!
  The word 'on' should appear when you switch, not disappear.

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• Toshiba 1 TB external HARD drive does not work

  I have a 1 to external drive what cards via usb cable, Ive put a lot of multimedia files on it and have been using it without problems don't have nothing put on for a little while, went to look for some files off it and comes up with usb not recognized, put it in another computer and the light comes done hard disk a rattling for a few seconds then hummes just as if it turns While the light stays on and is not all pulse, on the computer, it emits a sound to say ive plugged the on the bottom, it says safely remove hardware.

  Ive tried on two computers when in my computer it does not record.

  PS im not the tool sharper in the hangar when it come to tech stuff.

  The same problem. I bought edition 2015 last fall. It has a power supply problem (electrical problems). I thought it's because of my laptop. He made her crazy, but SMART was ok. Yesterday, it makes noises again and now it does not work. I saw light blue and only a little sound of pcb as start start. I saw that head of player on the Board.
  It's really a defection from the factory.

• External USB 3.0 HARD drive does not work on USB 3.0 port

  Hello guys,.

  I have a problem with my external HARD drive and the problem is that it is USB 3.0 feature does not work in my computer.

  The curious thing is that it works very well in the SATA port or a normal USB 2.0 port.

  Y at - it a failure with the HARD drive or is there something wrong with my motherboard (M5A99 fx pro r2.0)?

  Thanks in advance.

  From my point of view of the few is not HARD drive problem because the HARD drive operates in a USB 2.0 port.

  I m wondering if you tried to update the USB 3.0 driver.
  Have you tried this HARD disk in another computer / USB 3.0 ports?
  I think that its worth a check.

  Also, I read on some problems of USB 3.0 controller from different manufacturers.
  Sometimes, it might be possible that some problems of compatibility between different devices may arise.

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite U400-12F: LED power button & HDD protector tool does not work

  Hello

  I have a Satellite U400-12F and I bought a Vista Ultimate.
  After you have installed all the drivers and Toshiba of the corect order downloads, the button to turn on the power lights does not work.

  And I tried to install HDD protection Utility but the installer returned an error like 'cannot be installed on this model.
  Do you know why these problems?

  Thank you very much
  concerning
  Daniel

  > After installing all the drivers and software of Toshiba by order, the button to turn on the power switch lights does not work.
  Please check the BIOS settings. As I m not wrong not it takes an option called LED illumination or something like that. There you can turn on and off.
  Also, try to customize the special button of TOSHIBA using the Toshiba control utility.
  There are also some useful options.
  But to be honest I n not know exactly if this button doesn't work with Win XP. Maybe this feature is not available in XP.

  > I tried to install HDD protection Utility but the installer returned an error like 'cannot be installed on this model.
  This error message appears if you try to install a tool that was not designed for this series of laptop.
  The U400-12F seems to belong to the PSU40E. Check if it s a good tool.

• Satellite L50-B916 - recording external Microphone does not work

  Hello

  Connect an external microphone to * Headphone\Microphone combo socket *, still records through portable microphone instead of externally. Registration of external Microphone does not work.

  What Miss me? Please notify.

  Model: L50-B916
  Screenshot: http://s12.postimg.org/j8h3v5k4d/laptop.jpg

  I can't say with certainty what may be wrong here, but two things confuse me:
  -somehow your external MIC is obviously not detected because in the case when the external microphone is connected laptop switches automatically to it
  -I don't understand why there are two identical entries under recording devices.

  When I connect my headphone it is always a single entry (Conexant SmartAudio HD default unit), but my machine automatically goes to the external microphone only.

  Have you tested the feature with some applications like Skype?

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• EliteBook 1020: External keyboard does not work in the form of Bitlocker

  We had a few HP 1020 and 1040: models recently, and all have the same question. When the laptop is connected, the external keyboard does not work in the form of Bitlocker. It works in the BIOS and in Windows itself, but not in Bitlocker. This means that we must open the laptop screen to enter the Bitlocker pin, then let it open and GPO that dictates the computer into hibernation when the lid is closed. We have twisted the GPO, but in vain. Anyone else seen elsewhere or a solution?

  If the bios is up to date, I would look at the BIOS settings. I think that Fast Boot is enabled in your case, this may cause usb devices not to see in the stadium that BitLocker requires

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft