External keyboard works only after the restart with Port Replicator III Plus

The problem is that when I start the laptop, the external PS/2 keyboard does not work. When I reboot keyboard this one turns around and then I can use it.

This problem occurs on a laptop Toshiba Tecra with an Advanced Port Replicator III Plus. I used several keyboards, so this isn't the problem. I changed a value in the bios which is used for devices USB (mouse/keyboard). I disabled the option, because I use a keyboard and a PS/2 mouse, but the problem is not resolved. I hope someone has an answer to this problem.

Hello

It will be interesting to know what model Tecra you use. Is it perhaps Tecra A6?

Tags: Toshiba

Similar Questions

  • Printer works only after the reboot or shutdown

    I use win xp sp3 computer. My only works only after the restart or shutdown. If I reinstall the printer driver, then it will work. I have reinstall win xp but similer happen again. I scanned my system with kaspersky. But no change. I need a permanent solution. Please help me...

    Hi Pierre,.

    1. what exactly happens when you try to use the printer?

    2. you receive messages or error codes?

    3. What is the brand and model of your printer?

    Method 1:

    You can try to start the fixit printer and check if it helps:

    Diagnose and automatically fix problems printing and printer

    Also see the article and check:

    Resources for the resolution of the printer in Windows XP problems

    Method 2:

    You can check the event viewer to learn more about the problem.

    Procedure to view and manage event logs in Event Viewer in Windows XP

  • Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

    Hi all.

    We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
    Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

    I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

    In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

    At any one another experianced this problem and what was the resolution.

    Thank you very much

    Jonathan Davies

    Hello

    As far as I know additional drivers are not really needed to use the USB ports.
    This is why I m wondering why don t USB ports work.

    It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

    So maybe it s a software problem.
    First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
    After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

    Keep high speed Port Replicator III connected to the computer and restart the device.
    Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

    I hope that the USB ports don't work after this short workaround solution.
    Keep your fingers crossed.

  • Tecra A4 and the docking station Port Replicator III

    HI, I would buy a Tecra A4 with the staition of home, but I see that the docking POrt Replicator III has no s-video, bur the pc Yes. Anyone knows if I can use the s-video on the oc when I put the pc on dockin station?

    Hello

    Sorry, but it is not possible. You can only use the S-video port on the device directly.

    Good bye

  • PC laptop Envy 17: Envy 17 laptop PC fingerprint reader works only after the start

    The fingerprint on my Envy 17 reader reads only a fingerprint the first time that I connect once the system is booted (after shutdown or restart). From time to time, it will read once the system is locked, but that is extremely rare. I put the system in place using my MSN account and also configured SimplePass with default settings. SimplePass version is 8.00.57.

    I looked on several other issues in the forum and did not find something like this. Other issues reported when related to player doesn't work do not, for example. I found a few link in some messages describing such tasks that go back to a previous version of SimplePass.

    I don't know if it is related to my problem or not, but I noticed that the drive light sometimes flashes a sequence once the system is running. It seems that when the light flashes, it will not be read. It stops flashing when I placed my finger on the reader. (I think that the typical sequence is 3 flashes, pause, 1 flash. This cycle repeats.) This isn't always for that well, and I have found no correlation between the flashes and the measures taken after the initial logon.

    I made the fingerprint reader driver, rather than later.

    I uninstalled SimplePass (after update to the last with no luck) and the drive works fine now. I use RoboForm for my password management and it supports using the fingerprint so I'm covered there. I guess it should be renamed "SimplyNoPass."

  • I'm having problems after the restart with docking station, applications, etc.

    OS X: 10.11.3

    Mac Pro 2010 2 x 2, 66 GHz 6-Core

    Graphics NVIDIA Quadro 4000 card

    24 GB Ram

    50 GB of free memory

    4 additional hard disks

    Hello community,

    I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.

    Help, please.

    Lars

    Please, back up all data before proceeding.

    This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

    Step 1

    If you have more than one user, and the one in question is not an administrator, then go to step 2.

    Triple-click anywhere in the next line to this page to select this option:

    sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

    Copy the selected text in the Clipboard by pressing Control-C key combination.

    Launch the Terminal application integrated in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

    You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

    The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

    Step 2 (optional)

    Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

    Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

    If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

    Select

    Utilities ▹ Terminal

    in the menu bar. It will open a Terminal window. In this window, type this:

    resetp

    Press the tab key. The partial order you entered will automatically end this:

    resetpassword

    Press return. Opens a window to reset the password. You do not need to reset a password.

    Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

    Select your username in the menu option allows you to select the account if not already selected.

    Under Reset Home Directory Permissions and ACLs, click the reset button.

    Select

    ▹ Restart 

    in the menu bar.

  • File deleted on esxi system after the restart with the last patch (256968)

    Hello

    Since I installed latest patch on esxi (build 256968), every time that I reboot server esxi, I lost the files in / opt and the .ssh folder.

    Before this patch, the files were still there on reboot.

    Do you have any idea what's going on? Is this a new limitation of free esxi?

    I ' am, using this file to VM backup with ghettovcb and everything works fine (until I reload )

    Thank you.

    This is provided with ESXi, there is difficulty set of files, including any of the local VMFS volumes that are kept at the restart. There is a cronjob schedule that works for the configuration files important backup automatically at a local bootbank, which is then loaded after the next reboot, all files created by the user and most likely using the Busybox does not support console will not survive a restart by default.

    If you use the ghettoVCB.sh - Free alternative for backup of VMS to ESX (i) 3.5, 4.x & 5.x , recommendation would be to store the script and all relevant files is the local VMFS volume or on the shared storage (NFS, iSCSI/FC SAN) volume.

    There is a script in "/sbin/auto-backup.sh" that you can actually run to see what files are being backed up, you can easily modify this script to save additional files which will ensure that they are saved on a restart.

    =========================================================================

    William Lam

    VMware vExpert 2009,2010

    VMware scripts and resources at: http://www.virtuallyghetto.com/

    Twitter: @lamw

    repository scripts vGhetto

    Introduction to the vMA (tips/tricks)

    Getting started with vSphere SDK for Perl

    VMware Code Central - Scripts/code samples for developers and administrators

    VMware developer community

    If you find this information useful, please give points to "correct" or "useful".

  • Unable to connect to the Internet automatically after the restart with Linksys WAG 320n

    We have a problem with Linksys WAG 320n router that after rebooting the router it does not connect to the Internet automatically.

    instead I required to connect manually by clicking on State-> Connect.

    As previously he was showing server status DNS IP addresses, now it does not appear after connecting also.

    "" Could you let me know wheather miss me an option to automatically connect with LAN "' after reboot or anything else the cause.

    Thanks in advance.

    Thanks guys...

    After changing some settings wireless - bandwidth to value 'Standard' and MTU change, its done!

    Finally, the problem has been resolved. Now I can connect automatically when I restart the router and display the DNS IP addresses too.

    Thanks once again for most people trying to help me.

    I have another question and I would like to post separately instead of mention here.

  • Acer 1810TZ webcam works only after the new installation of Windows 7

    My hard drive died so I don't have access to the recovery partition. I did a fresh install of Windows 7 on a new drive.  Everything works except the webcam.  Windows has recognized and installed the drivers (and works) but nothing can connect to it.  It was working before the accident (also W7).

    The Acer website says it is made by Chicony (is ID 0 c 45 6310 suggests Sonix) so I downloaded and installed the drivers installed and appropriate Acer Crystal Eye, but it crashes at startup without error message.  Skype and other applications cannot connect to the camera webcam.  I also tried all the other drivers on the Acer website, just in case.

    Comparability Windows Center suggests that the pilot was developed by Suyin that might be the problem.  I found some Sonix drivers that will install on the Microsoft ones but make no difference.  I tried to install and Crystal Eye running in compatibility mode.

    Any ideas how to solve this problem?  I am now at a total loss.

    Help much appreciated. Thank you.

    Hi Shalini

    Thanks for getting back to me.

    I am running 64 bit.

    Yes, the webcam is detected under as WebCam imaging devices.

    Drivers been uninstalled (reboot) and re-installed (reboot)

    Webcam programs have been removed (CrystalEye & Skype)

    I downloaded for a Chicony (WebCam_Chicony (AP) _1.1.95.71_Win7x86x64) drivers as Acer judged my Chicony camera Suyin not

    I heard support from Acer, who say that the problem is caused by a difference between OEM and sales at retail of Windows 7 and I need to re - install Windows from the recovery DVD.  I prefer not to do that.

    Thank you

    Nick

  • Tecra M9 longer works with the Advanced Port Replicator III

    Hello

    I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

    Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

    Question: * the M9 will work with my plu III advanced port replicator? *

    Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

    If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

    All thoughts welcome...

    See you soon
    Daniel
    --

    Tecra M9 and Tecra M5 do not have the same docking connector.
    This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
    You need the correct docker for each system.

    May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
    http://www.dynadock.com

  • Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

    Hi all

    I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

    I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
    Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
    No mouse, no keyboard, and no USB key.

    When I start my Portege I must enter a password after you press the power button.
    These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

    If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

    I ran Windows 7 Enterprise on the Portege.
    BIOS version is 3.30

    Do you have a solution for me?

    Hello

    The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
    You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

    Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

    By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

    Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

  • HP mini 210-2177nr: Wireless only works after the restart. No boot from HP

    HP wireless works only after a reboot. I turned my laptop off and then starts later and exactly the same thing happens: first try, no connectivity, restart: everything works. Weird, right?  I restart my laptop and voila: everything works as soon as I log in. Every time.

    This happened with my HP netbooks and laptops still rarely - I wonder what change can cause this sometimes or other brands for example my Toshiba.

    I tried to upgrade to the latest available wireless drivers but that didn't fix it. Someone knows why.

    When I tried Windows 10 overview, I don't have this problem - it starts every time.

    It seems to be related software.

    Thanks for the link - HP - troubleshooting your wireless network computers and Internet (Windows 7)

    What made 10 Windows to solve the problem?

  • External speakers work only with powerpoint.

    External speakers work only with powerpoint. DVD, internet, music files, are not. They worked for the first few weeks.

    I have a HP dv7-6c27cl with intel core i5 and Windows 7.

    When I have the system check it, it finds no problem.  Apparently, I have the latest drivers. The fact that the speakers work with powerpoint, which is confusing.

    When I play a video file or music, I get an error message: "Windows Media Player has encountered a problem while playing the file."

    The headset works for internet but not DVD.

    I've installed Weatherbug a week ago and had to uninstall other garbage that come with it. I think that's when the problem started.

    Well, I set myself just now. I did a system restore to a point before that I installed Weatherbug, and now everything's fine.

  • Hi all. How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

    Hi all. I am new and on a free trial right now.

    How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

    Monthly payment included cloud storage?

    Peut I manage backups? And how?


    -Amir

    Hi amireos,

    Yes, you can create your workflow where you can keep all your images on the external hard drive and the Lightroom catalog file as well.

    If you start with Lightroom and then use the Destination location as external hard drive when you import your image of the external source such as a camera or SD.

    If you already have your Images on the Mac HD drive, then play all your Image on the external hard drive first and then import images directly from there.

    Finally, you can change the location of the Lightroom Catalog as well.

    Default location: folder on the Mac Drive HD, there is folder called Lightroom that you can move on the external drive too (however catalog Lightroom can't memory space as its only import previews of the images is not the real image and full)

    Once you move the file catalog Lightroom external hard disk, then you need to browse the catalog file when you launch Lightroom only once.

    See thread: LR catalog moving on external hard drive

    Let us know if it helps.

    Kind regards

    ~ Mohit

  • After the restart of mac OS x lion, the scanner hp wireless officejet pro 8600 does not appear.

    The printer works properly from the computer with Wi - Fi. The copy of front button works correctly to print a copy of the document on the scanner. But when you run the HP Scan 3 application, the error message is displayed: scanner communication cannot be established. OfficeJet Pro 8600 [CDD814] is currently unavailable. Make sure that your device is turned on, check the connection and make sure that your network is working properly. If these conditions are correct, restart the device and try to scan the image. After clicking OK, the unexpected fast HP scanning error button appears. Turning then does not cause the parser should appear. Using the system preferences > Print & Scan shows the printer but does not show the scanner. By selecting the button scan in the box dialog does not reveal a scanner.  Device is only 1 month. Help!

    I have connected to the Live cat HP, which has accompanied me through the process. It turns out that I had to delete the printer, then turn off the router and the printer. Reload the drivers from the CD. Reboot the router and the printer, and then run the installation program. Seems the router, "forgotten" on my printer and scanner. Thank you, HP!

Maybe you are looking for

  • battery or solar powered iphone 6?

    I have an iPhone 6 and would like to know if I can safely power favorite free this device using a powered solar panel or an external battery such as those like below. I'm having a bit of time figure this out on my own and do not want to try it unless

  • I don't remember answering questions for icloud, but I remember that email and password help me please

    But I do not remember becous of email address that it is closed

  • Size of header control SequenceView

    Hello! Currently incorporating the control SequenceView in my development of LV, I try to use its properties in order to customize. I am facing a problem: how to resize headers? You can see on the photo if you change the font for the headers to make

  • Replace the subset of table operation

    I have a code to a key VI event down that toggles the visibility of some indicators in response to press the function keys. Records using Boolean shift, the code worked with a few indicators. To scale to a large number of indicators, I decided that I

  • Ultimate Vista x 64 defective disk

    Vista ultimate x 64 disc that I began to separate between the top and the bottom of the layers of plastic around the inner ring. I rarely used the system repair disc (maybe once or twice in the lifetime of the disc). I am extremely careful with my re