Extract ODBC data Long field names

I need to extract some data created by the 4 lookout data logging (files .thd).  Is it possible to do so. I use a PC that does not have installed belvedere, I only database files

What I got so far is to export some fields whose names are less than 62 characters (using the program Logos 4.5 and driver ODBC database of 4 of Citadel by strict limitation of the field at 62 names). If I increase the limit to about 100 required to extract all the fields I can't export to Microsoft Query or any other software (which supports the import of ODBC database). I've tried several programs but usually they jump a message you can read that one point in time (or they do not see the fields or values at all)

Please, can you tell me a way I can extract the data?

The lifecycle of database is not applied in an aggressive manner. The database do not try and remove data simply because life has expired. On the contrary, the life expectancy is applied only when new data are currently recorded in the database and the log would need to increase the size of the database to store incoming data. The rate at which data are removed from the database may vary according to the rate at which new data are recorded in the database. If the frequency of recording is slow, it may take a long time for the data to be deleted.

J.D. Robertson

National Instruments

Tags: NI Software

Similar Questions

  • Why dreamweaver cannot resize columns long field name?

    Here is an example

    ID                           Make                      Offers

    {offers.advert_id}      {offers. O_Model} {offers.from}

    As you can see, ID has a long name, which means, corresponds to the length of the field

    Why can't reduce the width of the table less the length of the name? ID is only a short runway after all

    * Note. It is only the design view, live mode view is very well

    Thank you

    Adam

    You can't do it because the table cells automatically expand to accept everything that is within them. Design mode is only a guide to what a page looks like. Live View or test in a browser is the only way to see how a page in fact.

  • Employee expiration date (field name)

    Hello

    To write a quick formula, knowledge employee termination Date (the field name). Please let me know how to find a specific Oracle Apps domain name?

    Concerning

    Shakur

    EMP_TERM_DATE is the date of termination of the employee
    You can find all the items of data in the table "FF_DATABASE_ITEMS".

    Thank you.

  • Extraction of data from XMLType field

    Sorry, I am not sure XMLQuery, this is probably a simple question.  I am trying to extract data in a tabular form of an XMLTYPE field.  I will use the following example to illustrate my question:

    WITH a (too)

    Select xmltype (')

    < bugStatus >

    < status >

    < > 111 bugCode < / bugCode >

    < number of bug = "12345" description = "Low severity bug" / >

    < / status >

    < status >

    < > 222 bugCode < / bugCode >

    < number of bug = "67890" description = "high severity bug" / >

    < / status >

    < / bugStatus >

    XMLDATA') of double)

    SELECT x.*

    A xmltable (' bugStatus/status

    by the way the columns in a.xmldata

    status_code number path "bugCode.

    ) x ;

    Run this code extracts block the "bugCode' fields successfully.  But I would also to extract the 'bug number' and 'description' fields.  Ideally in the independent columns.  But even if only as a single line 'number of bug =... description =... ". "I could still do it analyze with SQL.

    Can someone tell me please in the sense of how I can also extract additional data?

    Thank you!

    Attributes are processed by '@' so in your example (thank you), you can solve it through

    WITH a (too)

    Select xmltype (')

    111

    222

    XMLDATA') of double)

    SELECT x.*

    A xmltable (' bugStatus/status

    PASSAGE a.xmldata

    COLUMNS

    ROW_NUMBER for ordinalite,

    path number bugCode "bugCode."

    bugNumber path number "bug/@number."

    path of varchar2 (4000) bugDescription 'bug/@description '.

    ) x ;

    ROW_NUMBER BUGCODE BUGNUMBER BUGDESCRIPTION

    ---------- ---------- ---------- --------------------------------------------------

    1 111 12345 low severity bug

    2 222 67890 high severity bug

  • Help needed to extract the pipe-delimited fields in a CLOB data type

    Hello

    I had a table with clob field as indicated below.
    CREATE TABLE TRANSACTION_INFO
    (
      TRASACTION_ID  CLOB,
      LOG_ID  NUMBER
    )
    
    Insert into TRANSACTION_INFO
       (TRASACTION_ID, LOG_ID)
     Values
       ('354502002020910|000000610214609663||09/27/09 08:02:37|RNEW|DC25|MOTOROLA|8802939198', 123);
    Insert into TRANSACTION_INFO
       (TRASACTION_ID, LOG_ID)
     Values
       ('354599892020910|000000610214609663||09/27/10 08:12:47|SOLD|DC23||8802939198', 456);
    COMMIT;
    As you can see the field Clob is a pipe delimited data. Now I'm able to extract the first two fields using the below querry. But it may be the right solution as
    SUBSTRING function fails if there is lack of character in all fields.
    Also when there is a null value in all the areas, how can I be able to get as a null value? Basically, I want to get the values in a defined way.

    How can we achieve this?
    Select Substr (TRASACTION_ID, 1, Instr (TRASACTION_ID, '|')-1) field1,
            Substr (TRASACTION_ID, 17, Instr (TRASACTION_ID, '|')+2) field2               
      From TRANSACTION_INFO;
      
    
    output should be like as shown
    
       FIELD1          FIELD2          FEILD3                 FEILD4
      
    354502002020910     000000610214609663                  09/27/09 08:02:37
    354599892020910     000000610214609663                  09/27/10 08:12:47
    Thank you
    Rede
    SQL> with transaction_info (trasaction_id, log_id)
         as (
     select '354502002020910|000000610214609663||09/27/09 08:02:37|RNEW|DC25|MOTOROLA|8802939198', 123 from dual union all
     select '354599892020910|||000000610214609663||09/27/10 08:12:47|SOLD|DC23||8802939198', 456 from dual union all
     select '|000000610214609663||09/27/10 08:12:47|SOLD|DC23||8802939198', 456 from dual
    )
    --
    --
    select trim(regexp_substr (trasaction_id, '[^|]+', 1, 1)) f1,
           trim(regexp_substr (trasaction_id, '[^|]+', 1, 2)) f2,
           trim(regexp_substr (trasaction_id, '[^|]+', 1, 3)) f3,
           trim(regexp_substr (trasaction_id, '[^|]+', 1, 4)) f4,
           trim(regexp_substr (trasaction_id, '[^|]+', 1, 5)) f5
      from (select regexp_replace(replace (trasaction_id, '|', '| '),'^\|', ' |') trasaction_id from transaction_info)
    /
    F1                   F2                   F3                   F4                   F5
    -------------------- -------------------- -------------------- -------------------- --------------------
    354502002020910      000000610214609663                        09/27/09 08:02:37    RNEW
    354599892020910                                                000000610214609663
                         000000610214609663                        09/27/10 08:12:47    SOLD                
    
    3 rows selected.
    
  • extract table data to different locations

    Hello

    I collected data in the format:

    Temp: 25 Freq: 136 100 99.993 2998,581 0
    Temp: 25 Freq: 136 125,89 125.991 2997,196-0.004
    Temp: 25 Freq: 136 158,48 158.007 - 2995, 1 0.01
    Temp: 25 Freq: 136 199,52 200.002 2991, 905 - 0.019
    Temp: 25 Freq: 155 100 100.005 3000,866 0.003
    Temp: 25 Freq: 155 125,89 126.003 3000,086 0.000
    Temp: 25 Freq: 155 158,48 157.985 2996, 133 - 0.011
    Temp: 25 Freq: 155 199,52 200.018 2992,644-0,021
    Temp: 25 Freq: 174 100 100 3001,405 0.000
    Temp: 25 Freq: 174 125,89 126.016 2997, 996 - 0.010
    Temp: 25 Freq: 174 158,48 158.013 2996,371-0.015
    Temp: 25 Freq: 174 199,52 199.983 2992, 315 - 0,026
    Temp :-30 Freq: 136 100 99.993 2998,581 0
    Temp :-30 Freq: 136 125,89 125.991 2997,196-0.004
    Temp :-30 Freq: 136 158,48 158.007 - 2995, 1 0.01
    Temp :-30 Freq: 136 199,52 200.002 2991, 905 - 0.019
    Temp :-30 Freq: 155 100 100.005 3000,866 0.003
    Temp :-30 Freq: 155 125,89 126.003 3000,086 0.000
    Temp :-30 Freq: 155 158,48 157.985 2996, 133 - 0.011
    Temp :-30 Freq: 155 199,52 200.018 2992,644-0,021
    Temp :-30 Freq: 174 100 100 3001,405 0.000
    Temp :-30 Freq: 174 125,89 126.016 2997, 996 - 0.010
    Temp :-30 Freq: 174 158,48 158.013 2996,371-0.015
    Temp :-30 Freq: 174 199,52 199.983 2992, 315 - 0,026
    Temp: + 70 Freq: 136 100 99.993 2998,581 0
    Temp: + 70 Freq: 136 125,89 125.991 2997,196-0.004
    Temp: + 70 Freq: 136 158,48 158.007 - 2995, 1 0.01
    Temp: + 70 Freq: 136 199,52 200.002 2991, 905 - 0.019
    Temp: + 70 Freq: 155 100 100.005 3000,866 0.003
    Temp: + 70 Freq: 155 125,89 126.003 3000,086 0.000
    Temp: + 70 Freq: 155 158,48 157.985 2996, 133 - 0.011
    Temp: + 70 Freq: 155 199,52 200.018 2992,644-0,021
    Temp: + 70 Freq: 174 100 100 3001,405 0.000
    Temp: + 70 Freq: 174 125,89 126.016 2997, 996 - 0.010
    Temp: + 70 Freq: 174 158,48 158.013 2996,371-0.015
    Temp: + 70 Freq: 174 199,52 199.983 2992, 315 - 0,026

    I am able to extract specific data and establish a curve for the different Freqs (see "extract file_for email.VI pivot table).  I would like to help in order now to a parcel with a fixed frequency but different time (therefore field will be 3 Graphics: 25-30, + 70 for the same word of freq 136).

    Thanks for your help and your time,

    hiNi.

    This code gross works for any number of temperatures and allow for different sizes of each table (say that you measured 3 points to 1, temp and 6 points to another).  I strongly doubt this operation is necessary, but this is how the code works.

    Just drop the and connect the tables correctly loaded from your text file to place the controls in table I used.  (or you can wire up and use it as a subvi).

  • DBTools extract element data

    Hello

    Calling a stored procedure from a MS - SQL database 2005, and he returned the 2 dozen fields.  I need to combine the result data in a cluster for my client.

    Its cluster contains booleans, strings and I32s and slna.

    I need to do the same thing, but my data comes from the function "dbtools extract the data of the item.  Problem is that I can't get output anywhere to convert native data types so that the function of the original function of the customer Cluster beam.

    Can someone point me to an example of LV function for this code?  I tried to use the "database of Variant data", but I have not found the magic way to make sure the function bundle sees a native data type.

    Help to LV and this forum are not telling me what I need to know.

    Any help is greatly appreciated!

    Dave

    OK maybe the 'database of Variant data"is most appropriate?

  • Foglight v6 - FaultException: impossible to extract the data of inventory of the collector

    After having modernized our virtual center to V4, the foglight fails to report all the details and only has the following alert:
    "FaultException: impossible to extract the data of inventory of the collector: the parameter name cannot be null or an empty string."
    ' Parameter name: key to make sure the collection agent service is running.
    If anyone else has had this problem and how to solve?
    Thank you
    Karim

    Hi Joviyach,
    I logged a call with Vizioncore and the resolution is as follows:
    the problem you have is related to a VMware problem experienced during the upgrade to vSphere 4.0 as detailed in: kb.vmware.com/.../search.do
    Bascially, you must run a SQL command of your Virtual Center via MS SQL Management Studio that will identify one or more VMs who have a missing entry in the VPX_VIRTUAL_SCSICONTROLLER table. Once this information is determined that you would follow the steps 2 to 6 of the reolution... basically remove these virtual machines of the inventory and adding them back.
    When these steps are complete, you will re-start the vFoglight Collector of Vmware and Vmware vFoglight connector services.

  • installation of the software gives an error 1320, too long file name

    During the installation of the CAD of DraftSight software on a system running Windows 7 Prof I get an error message 1320, too long file name and the software cannot be installed.  A work around DraftSight suggested to rename the data folder C:\ProgramData\Application, DraftSight installation and then restore the original name of the file.  A second workaround was to delete the folder, install the program and then restore the folder.  A third workarounds solution had to drag or copy and paste the Application Data folder on the desktop, install the software and then return the ProgramData folder in the directory.

    For Windows 7 teacher the problem with alternatives a & is the shortcut to the application data to other programs is lost when the name or the file is restored, leaving only an Application Data folder and delete the shortcut.  The problem with the three workaround is that the shortcut cannot be dragged or cut and paste on the desktop.

    How can I temporarily allow the program to install and create a folder of Application data in the ProgramData directory and then move the program information in the folder the shortcut pointing to?

    I would also like to know how to get the same result with Windows Home Premium where the Application data file is not a shortcut, but is actually a locked folder.  I would need to enter the locked folder information on the program.  Some users of DraftSight say the two alternatives have worked for them and I suspect that they may work for Windows 7 Home Premium, but the impact on other programs may not be obvious.

    When you try to install the program?

    Assuming that you have the ability to choose where to install the program, you can try to shorten the location.
    For example, you can try to install to C:\Program Files\Draftsight\ or if necessary C:\Draftsight

    If this does not work, there is nothing that we will be able to suggest other than to contact the developer again. Change the ProgramData folder should not affect this type of problem and the only thing that is likely to affect the writing on the application folder data would be the length of your username, but even then I would feel that the application is something wrong in this case.

  • Creation of Contact the PHP export leads to failure: field 'name' must be a string value.

    Hello

    I export contacts from Eloqua to my application using the API as a whole. I am stuck at a point where I'm creating export based on my maps of fields as follows:

    GET .../contact/export

    {'name' ": example","secondsToRetainData": "3600", "fields": {"C_EmailAddress": "{{Contact.Field (C_EmailAddress)" "}}" "}}

    and the server returns an error:

    {"failures": [{'field': 'name', 'coercion': 'Must be a string value, at least 1 character and a maximum of 100 characters long.'}, {'field': 'fields', 'coercion': 'Required.'}]}

    In order to ensure that my JSON string is syntactically correct, I copied (very useful) application at http secure.eloqua.com/api/docs/Dynamic/Bulk/1.0/Export.aspx and run it through the server, which results in the same error.

    I suspect that Eloqua does not recognize parts of my application as a string payload. I use PHP to build a table that is then encoded using json_encode(). All the world has known this before and found a solution? Please share!

    Wouter

    OK, my next wag: is the Content-Type header?  It must be set to application/json.  Who met with some of the calls.

    .  Topher

  • Extracting the data from relational tables in 11.1.2.1

    I want to extract the following data sets from relational tables
    1 attribute and his partner basic member
    2 Smartlist value of an account

    Have a code to extract such data? It will be useful in pointing to the correct table names.

    Thank you

    You will find the table schemas in the [documentation for EPMA | http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip]. If this does not work, there are other options to export hierarchies in text files. You can use the lifecycle management or the [EPMA line Generator | http://docs.oracle.com/cd/E17236_01/epm.1112/epma_file_gen_user/launch.html].

    Kyle Goodfriend
    http://www.in2hyperion.com

    Please make sure that you assign your post as answered when an appropriate response is provided (or useful when it takes place) as well as other benefits.

  • Using EXTRACT XML data extraction

    Hi, I have a XML file where I want to analyze the fields in a table in DB:

    <? XML version = "1.0" encoding = "UTF-8"? >
    < FIXML > < batch > < MktDataFull BizDt = '2012-07-13' > < Instrmt Sym = "JCPRXU" ID = "JCPRXU" Desc = "JCP.SR. XR. «USD"SecTyp ="CD"Src ="H"subtype = MMY" S "="201209"MatDt = ' 2012-09-20" Mult = Exch "0.01" = "CMD" UOM = "CTL" UOMCcy = "USD" UOMQty = "1" PxUOM = "IPNT" ValMeth = "CD" CpnRt = "1.0" IntAcrl = ' 2012-06-20 ' CpnPmt = ' 2012-09-20 ' NotnlPctOut = "100.0" Snrty = 'SR' RstrctTyp = 'XR' DayCntMeth = "ACT/360" tenor = "0 M" > < DITTA HELP = "US708130AC31" AltIDSrc = "105" / > < HELP AltID = "JCP.SR." "" ""» XR. USD.12U.100"AltIDSrc ="101"/ > < HELP DITTA = '1 201209 JCPRXU' AltIDSrc = 'H' / > < DITTA HELP ="1 201209 JCPRXU"AltIDSrc ="100"/ > < Evnt EventTyp ="5"Dt ="2008-09-19"/ > < Evnt EventTyp = '7' Dt = '2012-09-19' / > < Evnt EventTyp ="19"Dt ="2012-10-05"/ > < Evnt EventTyp ="100"Dt ="2012-07-16"/ > < Evnt EventTyp = '8' Dt ="2012-07-14"/ > < Evnt EventTyp = '9' Dt = '2012-09-20' / > < Evnt EventTyp ="101"Dt = '2012-03-20' / > < Evnt EventTyp ="102"Dt ="2008-09-20"/ > < Evnt EventTyp = « 103 » Dt = « 2008-09-22 » / >< Evnt EventTyp = « 104 » Dt = « 2012-09-19 » / >< Evnt EventTyp = « 111 » Dt = « 2012-09-20 » / >< Evnt EventTyp = « 112 » Dt = « 2012-06-20 » / >< Evnt EventTyp = « 113 » Dt = « 2012-03-20 » / >< Evnt EventTyp = « 114 » Dt = « 2012-07-12 » / >< Evnt EventTyp = « 115 » Dt = « 2012-07-16 » / >< / Instrmt >< complet Typ = « 6 » Px = Mkt « 99.7433368 » = « CMD » QCond = « 6 » PxTyp = « 1 » OpenClsSettlFlag = « 1 » >< / Full >< complet Typ = « 6 » Px = « 234.5254 » Mkt = QCond « CMD » = « 6 » PxTyp = « 6 » ' OpenClsSettlFlag = '1' > < / Full > < full Typ = "Y" Px = Mkt "40.0" = 'CMD' PxTyp = '1' OpenClsSettlFlag = '1' > < / Full > < full Typ = '6' Px = "234.5212" Mkt = QCond 'CMD' = '7' PxTyp = '6' OpenClsSettlFlag = '1' > < / Full > < full Typ = Mkt "B" = 'CMD' OpenClsSettlFlag = '4' Sz = '0' > < / Full > < full type = 'C' Mkt = 'CMD' OpenClsSettlFlag = '4' Sz = '0' > < / Full > < full Typ = 'z' Px = Mkt '0.18' = 'CMD' PxTyp = '1' OpenClsSettlFlag = '1 '. > < / full > < full Typ = 'y' Px = "0.1899965" Mkt = QCond 'CMD' = '6' PxTyp = '5' OpenClsSettlFlag = '1' > < / Full > < InstrmtExt > < Attrb Typ = '100' Val = '24' / > < Attrb Typ = '101' Val = '0' / > < Attrb Typ = '109' Val = '0' / > < Attrb Typ = '103' Val = '24' / > < Attrb Typ = '102' Val = '24' / > < Attrb Typ = '110' Val = '3' / > < Attrb Typ = '29' Val = 'Y' / > < Attrb Typ = '112' Val = 'Y ' /. > < / InstrmtExt > < / MktDataFull > < / batch > < / FIXML >


    Right now, I'm just trying to extract the first 3 fields, BizDt, Bal and id I use to analyze the following:


    SELECT
    Extract (value (p), '/BizDt') .getStringVal () AS DATE_,.
    Extract (value (p), ' /Instrmt/Sym').getStringVal (AS SYMBOL),)
    Extract (value (p), ' /Instrmt/ID').getStringVal () AS ID_)

    OF s TABLE_NAME.
    TABLE (XMLSEQUENCE (Extract (xmlType.createXml (s.CDS_CLOB), ' FIXML/batch/MktDataFull / *'))) p
    WHERE s.ID_ = 1

    But I get nothing back. My guess is the because the XML data does not have opening tags and formal closing, because if I change my XML like this:

    <? XML version = "1.0" encoding = "UTF-8"? >
    < FIXML > < batch > < MktDataFull > < BizDt > 2012 - 07 - 13 < / BizDt > < Instrmt > < Sym > JCPRXU < / Sym > < ID > JCPRXU < /ID > < Desc > JCP.SR. XR. USD < / Desc > < SecTyp > CD < / SecTyp > < / Instrmt > < / MktDataFull > < / batch > < / FIXML >

    I was able to get the data. Therefore, in order so solve this problem, what should I do with my original XML? Can I format the tags?

    Thank you

    When you nest xsl: for each of the elements, the select expression is evaluated in the context of the enclosing instance.

    Consider this:

    
      
    

    This means you are trying to match items complete as children Instrmt, that is not correct, because they are actually siblings.
    In the same goes for HELP, Evnt etc.

    I don't know what kind of structure you want.
    Caps all does not much sense given that groups of brothers of repeat items that have no apparent correlation between them. Essentially, you end up with a big Cartesian product.

    I would approach this by storing repeated elements in different tables with a parent/child relationship to preserve the hierarchical nature of the data (if necessary).

  • How to find and replace data in fields of form in acrobat xi, its not allowing to do while trying, one

    How to find and replace data in fields of form in acrobat xi, its not allowing to do while trying, request adobe livecycle to settle. Help, please.

    Best way to do is the following:

    -Open the PDF in Acrobat.

    -Go to tools - form - form more Options - export data.

    -Save form data in an XML file somewhere on your system.

    -Open the XML file in a plain text editor (I recommend Notepad ++).

    -Let's say you want to replace all the years in dates "2013" to '2014 '. Do a global search & replace '2013-' to '2014' - (I added the dashboard in order to ensure that only the date fields are changed).

    -Save the XML file (maybe under a new name).

    -Go back to the PDF file and now go to tools - forms - more form Options - import data.

    -Select the modified XML file and import it.

    -Fact!

  • Date picker is not available in the date/time field

    Hello

    I'm wondering using a date/time field. Given that I made some changes in this field, the date picker (down arrow to the right of the field displays a calendar) is no longer available. Everyone has a nail what could be the problem or how I can bring the date picker to that field.

    Thanks in advance.

    Best,

    Maja.

    Hi Maja,

    the date picker widget is active only if the date and time fields data format is set to date.

    Check the settings of fields in the binding tab.

  • question: format / 'language' of the current Date (in the date/time field), javascript only

    Hello

    I have 2 date fields in my form, which should display the date in a different format. (yyyy.mm.dd / dd-mm-yyyy)

    To get the current date I only use java script

    Formular1.p1.date_YYYYmmDD::initialize - (JavaScript, client)
    
         var date = new Date();
        this.rawValue  =  date.toLocaleDateString();
    
    

    My first problem is (red): I get the date in English, but I want it in another language. As it was defined in the form settings

    screenshot_date1.png

    My second question is: How can I format a date/time-sized (not a text field) in javascript with a model specific to the init event?

    It seems that my code in the init event replaces the model of the DateTime field configuration

    Here is my form, if anyone wants to check it out:

    https://Acrobat.com/#d=zeOMyj9MhBdYbVWk8S1pHw

    Hello

    I think that these two problems are the same, by setting a date/time field using the rawValue always format must be yyyy-mm-dd, if you use a different format, the value is just seen as text and poster without shaped.

    var date = new Date();

    this.rawValue = util.printd("yyyy-mm-dd", date);

     

    You can also set the formattedValue if you have a date in the correct format.

    var date = new Date();

    var currentLocale = xfa.resolveNode("#localeSet.#locale").name;

    var dateFormat = "date("+currentLocale+"){DD MMM, YYYY}"

    this.formattedValue = util.printd(dateFormat, date, true)

    This code assumes that the view model is date {MMM DD, YYYY}

    The date format specification is in the XFA http://partners.adobe.com/public/developer/xml/index_arch.html specification

    Concerning

    Bruce

Maybe you are looking for

  • Incompatible print cartridge error C309g.

    Incompatible print cartridge error C309g. When replacing foul 564 XL (black), now I get this message. The new cartridge works in another printer that uses 564 XL. Went ahead and tried another brand new 564 XL - same message. Have turned printer on an

  • HP ENVY 15-k163cl: HP ENVY 15 updated to Windows 10, now unable to connect to the network

    I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.When I turn on my laptop, it is not automatically connect to my

  • Poor quality of printing after inactivity

    I hadn't used my printer J6480 for awhile, at least 6 months, and now reuse I'm getting poor print quality.  The color is weak and inconsistent, includes everything black.  Sometimes, it seems that some points are not shoot the printhead - if that's

  • 0xc000000e no available boot devices

    My computer crashed about an hour earlier and from the beginning he said he No available boot device SATA 0: no SATA 1: no SATA 2: no SATA 3: no It won't let me access the start menu through the splash screen My computer is a Dell Inspiron from 2005-

  • WCS and co-located IAS

    I want to install the configuration wireless unified, 6500 WISN card-based. I'll also install MS IAS server and PDC additioanal just to authenticate wireless clients ONLY. I also try to install the WCS Server also on the same server. What would be th