Extraction of a particular tree in Front pannel cell value

Similar Questions

• looking to upgrade the psu, case and add front pannel 5.25 fans.

  I own a hp pavilion p6310f. and I'm looking to upgrade my power supply to hande the power of extra fans and an improved processor, cooling system, I need also a case that correspond to the only with other ports so my fan mounted above pci p6310f is left above the pci so I can use this location. and finally, I need to be able to add startech fans at the front. I don't need a fancy case just something larger but similar research for my style of case default hp p6310f

  EDTII

  Hello

  Look over this case Rosewill Challenger. It is not very expensive and it allows you to mount the input of the power supply down to the option (on a hard surface is recommended as a carpet could cause problems of air flow).  Don't forget to take into account the width of the case when buying a system of cooling heat sinks cool air are high enough.  This case has a lot of large cooling fans.

  The existing media player could be a problem (finish and made search).

  I have one using the Rosewill future for one of my PC, but I see that it is out of stock Newegg.

• How controls are grouped in the front pannel "write basic series and Read.vi.

  I wonder how the controls are grouped on the front. An example is the "basic series write and Read.vi. The rocker of Scripture and the 'rope to wirte' are grouped in a raised area. I couldn't move individual out of this box control when I tried to arrange the controls. How they are grouped and how do I move them individually?

  Thank you.

  

  Select the Group of controls you want to Group/Ungroup and select the option group/ungroup as shown above.no wonder in this

• Edit Tree Control Question, specific cells

  Hello

  I have a question on the modification of tree controls.

  I have played around with the properties and to date have not thought to it. That's what I'm doing:

  I have a tree with multi-column control.

  The columns are essentially: name, Description, value 1 and value 2

  I want to do is be able to select the value 1 and value 2 and change them individually on each line.

  I want to be able to change the name and Description.

  What I was able to do so far is the editable table and every time I get the string in the active cell regardless of the cell that I click in returns always the value of the first column.

  I had this problem by making my changes of value by calling a pop-up box and change the values, but I would rather simplify it by editing the tree.

  I can't give my real code, but if it helps I can make an example facsimile...

  Here's a suggestion:

  -tour of the edition on the tree cell

  -When the clicks double user on a cell, if the column index is 2 or 3 then set the position of the appropriate cell editing

  see this: (in this example, I'm not filtering the column index, but I'm sure that you'll be able to add this feature)

  

• Queries line to generate a tree for a given node value

  Hello
  
  I have a requirement where I want to fill a tree only the filling of the structure that contains a given value.
  
  For example the complete structure for the emp table is
  PATH
  
  -> SCOTT
  -> SCOTT-> ADAMS
  -> FORD
  --> FORD--> SMITH
  -> ALLEN
  -> JAMES
  -> TURNER
  -> MARTIN
  -> WARD
  --> MILLER
  -> ADAMS
  -> JONES
  -> JONES-> SCOTT
  -> JONES-SCOTT-> ADAMS >
  -> JONES-> FORD
  -> JONES--> FORD--> SMITH
  -> CLARK
  -> CLARK-> MILLER
  -> BLAKE
  -> BLAKE-> ALLEN
  -> BLAKE-> JAMES
  -> BLAKE-> TURNER
  -> BLAKE-> MARTIN
  -> BLAKE-> WARD
  -> SMITH
  -> KING
  -> KING-> JONES
  -> KING->-> SCOTT JONES
  -> KING->->-> ADAMS SCOTT JONES
  -> KING-JONES-> FORD >
  -> KING-JONES--> FORD--> SMITH >
  -> KING-> CLARK
  -> KING-CLARK-MILLER > >
  -> KING-> BLAKE
  -> KING->-> ALLEN BLAKE
  -> KING->-> JAMES BLAKE
  -> KING-BLAKE-TURNER > >
  -> KING-BLAKE-MARTIN > >
  -> KING-> BLAKE-> WARD
  
  and I need only records that has SCOTT, would be the expected production
  -> SCOTT
  -> SCOTT-> ADAMS
  -> JONES-> SCOTT
  -> JONES-SCOTT-> ADAMS >
  -> KING->-> SCOTT JONES
  -> KING->->-> ADAMS SCOTT JONES
  
  How can this be achieved. Any help will be appreciated.

  To go faster, create an index on ENAME, then:

  with emps_up as (
    select EMPNO, MGR from EMP
    start with ename = 'SCOTT'
    connect by MGR = prior EMPNO
  ), EMPS_DOWN as (
    select EMPNO, MGR from EMP
    where level > 1
    start with ename = 'SCOTT'
    connect by EMPNO = prior MGR
  )
  select substr(SYS_CONNECT_BY_PATH(ENAME, '->'), 3) ename_path
  from (
    select * from EMPS_UP
    union all
    select * from EMPS_DOWN
  ) a join EMP B on a.EMPNO = B.EMPNO
  where connect_by_isleaf = 1
  start with a.MGR is null
  connect by a.mgr = prior a.empno;
  
  KING->JONES->SCOTT->ADAMS
  

  I don't know why you want to repeat the intermediate lines. If this is really necessary, just change the last WHERE clause.

  P.S. You say you want to use the LIKE clause, because your table is huge. You don't want to omit the START WITH. The TYPE would be OK if there is any '%' in the beginning.

  Published by: stew Ashton on 29 August 2012 23:04

• Extraction of the system using 11 g API Configuration values

  Hello
  
  
  I need to extract value from the System Configuration in a map using the OIM 11 g APIs. Is someone can you please guide me what API can be used for the same thing.
  
  
  Thanks in advance,
  Anuj.

  You can as well use this:

  http://docs.Oracle.com/CD/E23549_01/apirefs.1111/e17334/Thor/API/operations/tcPropertyOperationsIntf.html#getPropertyValue_java_lang_String _

• NULL values for some elements of the XML reading tree

  I am confirming that I interpret correctly all the elements of a custom data XML structure defined by my application (the schema is completely under my control).  Some of the elements in my XML tree are read as NULL values, even if similar items are readind as expected.  I have checked some obvious things like misspelling the names of keys, but have not yet find the problem.  Anyone who has debugged similar questions - what else could cause this?

  Example XML:

  
      1.0.0.0
      1000
      MyAppsName
      
          
              1000
              userDefined
              StructName
          
      
  
  

  And extracted C++ w/comments at the end of each line about what I see (DataManager is my class of CRUD operations):

  In DataManager.hpp:

  QVariant mCustomDataStructsTopLevel;
  QVariantMap mCustomDataStructsTopLevelMap;
  

  In DataManager.cpp:

  mCustomDataStructsTopLevel = mXda.load(Utils::dataFilePath(customDataStructsFileName));  // XmlDataAccess; verified loading w/no errors
  mCustomDataStructsTopLevelMap = mCustomDataStructsTopLevel.toMap();
  
  qDebug() << "appName element value: " << mCustomDataStructsTopLevelMap["appName"]; // Outputs "MyAppsName" as expected
  qDebug() << "lastId element value: " << mCustomDataStructsTopLevelMap["lastId"]; // Outputs null (specifically: QVariant(, ) ) - this is NOT expected
  qDebug() << "appVersion element value: " << mCustomDataStructsTopLevelMap["appVersion"]; // Outputs null (specifically: QVariant(QString, "") )  - this is NOT expected
  

  OK, I got the feeling (and actually hoped) it was a silly mistake of face-palm on my part (compared to a problem of BB10 who had little chance of getting fixed).

  The problem is that I copy the structure of custom data from Starter to my Active dir to my data directory to first install but do not crush him on subsequent launches, as the copy in the data directory is what the user changes and relies on.  I was not a delete and reinstall on each of my iterations, so I wasn't really loading the modified versions of my XML I wanted--just, I was getting a day old stale version which was actually for the items I didn't expect NULL values for nulls.  DOH!

• using trees - how to get the higher levels

  I have create a hierarchical tree based on a couple of tables via a record group, which I create on the fly.
  
  Then I let users attach documents to nodes of the tree. The problem is that the node may not exist in the database but they can build as they go. So I need to insert all archives on tree in table when they attach a document. I don't want to do this before I am only interested when they are attaching documents - rather than storing all data that can never be used.
  
  My problem is when they attach the document I want to find all the levels in this particular tree to insert.
  
  that is, if my tree is as follows
  
  1
  -1 b
  2
  -2B
  3
  -3B
  -3 c
  
  and the attachment of the user against the 3 c I want to insert 3 in the table, and then 3B, then the document against 3 b, so I need to know what its top level in this case is 3.
  
  How is the best way to do this? I have the NODE_DEPTH property - to know its not top level and the VALUE of the NŒUD to know the value and NODE_LABEL for the description, but how can I find my uplevel when its not stored in a table anywhere.

  Hello
  See the GET_TREE_NODE_PARENT function in the Form Builder Help

• Property selectedItem tree question

  Hi all

  After setting the dataprovider for the tree, I browsed the dataprovider of the tree and selected a particular tree by using the tree.selectedItem property node. But a problem of stack trace mentioned below during the launch of the tree and execution.

  

  You might want to try a later version of 3.x.  Otherwise, you will need to

  debugging in and see what assumptions does the code.

• AppleScript - extraire extract values from a table, create a text file with these values

  Hello world

  Lets say I have a table that looks a bit like this

  

  And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

  

  

  Is it still possible?

  I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

  There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

  Y at - it script-genius out there?

  See you soon

  Florian

  Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

  say application "Numbers".

  say front document to tell the worksheet active

  say ( class is worn) fromfirst table whose selection range

  selectionRange defined in column 1 of the selection

  set cnt to 0

  the value destRange for range

  the value currentList to {}

  -the list of switches

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

  switch and the value in the currentList currentList

  end if

  NTC put to the cnt + 1

  end Repeat

  -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

  Repeat with aswitch in currentList

  " game textOut to '# Script generated with Applescript for switch' & aswitch &"

  # on "& (today's date) &"

  !

  conf t

  "

  set cnt to 0

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

  if (aswitch contains the switch) then

  the value cellCol to address a column of first cell of acellule

  address of line of first cell value cellRow in of acellule

  value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

  the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

  the value desc to the (value of the cell cellRow of column (cellCol + 3))

  " put to textOut textOut &.

  !

  "" IG 1/0 interface / "& aport &.

  switchport mode access

  switchport access vlan "" & vlan & ""

  Description LINK TO "" & desc & ""

  "

  on the other

  -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

  end if

  NTC put to the cnt + 1

  end Repeat

  Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

  textOut write to myFile

  MyFile close access

  end Repeat

  end say

  end say

  end say

• How to set programmatically the ' input length Max ' of a cell of the tree

  I want to specify a maximum length of N_MAX for names of cell of a tree, so that when the user press the F2 key to rename, it has failed to enter more characters N_MAX.

  For existing items in the file of the uir, I am able to get this behavior by setting the tree Edit > edit columns/cells > change cell > entry length Max to 5 (see attached img03.png).

  When the user tries to rename this article, he has failed to enter more than 5 characters (see attached img02.png).

  But how to set this attribute for items added programmatically (for example, through InsertTreeItem ()).

  I was not able to find the right attribute, because the attribute of cells ATTR_LABEL_TEXT_LENGTH (which seems more or less what I'm looking for) is "not definable.

  You have found an omission in documentation. You can use ATTR_MAX_ENTRY_LENGTH and ATTR_MAX_ENTRY_CHARS with SetTreeCellAttribute and SetTreeItemAttribute to set the max entry for a cell of the tree.

  Please report to us this and sorry for the inconvenience.

• XMLTYPE Datatype - extracted value of an element based on the value in another element

  Hi all

  I have a typical XML problem in which I am trying to extract the value of a property on the base of another.

  Here is an example of XML data:-

  < object type = "InstanceObject:instanceKeyValue" version = "2" >

  < property name = 'name' value = 'COUNTRY' valueType = "string" / >

  < property name = "keyValueType" value = "VARCHAR" valueType = "string" / >

  < property name = "keyValue" value = "SINGAPORE" valueType = "string" / >

  < / object >

  < object type = "InstanceObject:instanceKeyValue" version = "2" >

  < property name = "name" value = "DATA_SET" valueType = "string" / >

  < property name = "keyValueType" value = "VARCHAR" valueType = "string" / >

  < property name = value 'keyValue' = 'April 9, 2014' valueType = "string" / >

  < / object >

  My requirement is-

  If value = 'COUNTRY' under/object/property then I need the property value where @name = "keyValue" that is Singapore.

  But when I do

  SELECT EXTRACT('object/property[@name="instanceKeyValues"]/object/property[@name="keyValue"]/@value')

  I get the two keyValues SINGAPORE09-APR-2014

  While I only need Singapore.

  No idea how we can solve this?

  Sorry, I'm a jerk, so finally I just with this

  with t as)
  Select xmltype)
  '
          
         

  
  '
  ) x
  of the double
  )

  Select
  Val
  t
  xmltable)
  "for $o in/root/object.
  ["Let $p: = $o/property[@name="keyValue "]
  ["where $o/property[@name="name"][@value="COUNTRY "]
  Return $p'- or return $p/@value'
  go x
  columns
  path of varchar2 (40) Val '@value' - or '.'
  )

  VAL
  Singapore
  India

• Table tree ADF elements at all levels in nodeStamp facet

  Fusion Middleware Version: 11.1.1.5

  WebLogic: 10.3.5.0

  JDeveloper Build: Build JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013

  Project: Custom Portal Application WebCenter integrated with ADF custom workflows.

  Hello

  
  I have a problem with ADF Tree Table (af:treeTable) that if I add an item to a group under the facet "nodeStamp" he repeats for all levels in the tree even those outside the group.

  Overview:

  -3-master level / retail structure created using ADF business components (display objects 3 connected by 2 show links)

  -ADF Tree Table based on the master-detail

  -Requirement to indicate 3 levels of data in the first column tree

  -Table tree renders correctly showing the values for "node. FullName ',' node. DisplayValue' and ' node. HoursType' respectively in a tree of level 3.

  -When another element is added to the top node in the tree ("node. FullName') for example, some output text ('node. TimeBuildingBlockId'), it is displayed along components side ' node. DisplayValue' and ' node. HoursType' as well.

  Code snippet:

  < af:treeTable value = "#{bindings." Var PerPeopleFVO1.treeModel}' = 'node '.

  selectionListener = "#{bindings." PerPeopleFVO1.treeModel.makeCurrent}.

  rowSelection = "single" id = "tt1" styleClass = "AFStretchWidth."

  horizontalGridVisible = "true" verticalGridVisible = "true".

  disableColumnReordering = 'true' summary =' entered in the time sheet.

  displayRow = "selected" expandAllEnabled = "false".

  contentDelivery = 'immediate' autoHeightRows = '24 '.

  columnStretching = "column: column1 '.

  Binding = "#{pageFlowScope.TimecardMB.tree_binding}" >

  < f: facet name = "nodeStamp" >

  < af:column id = "c1" headerText = "Partner details" width = "500" >

  < af:group id = "g4" >

  < af:outputText value = "#{node." FullName}"id ="ot3"/ >

  < af:outputText value = "#{node." TimeBuildingBlockId}"id ="ot1"/ >

  < / af:group >

  < af:outputText value = "#{node." DisplayValue}"id ="ot4 ".

  inlineStyle = "color: Green;" make-weight: bolder; "/ >

  < af:outputText value = "#{node." HoursType}"id ="ot5"/ >

  < f: facet = 'filter' name / >

  < / af:column >

  < / f: facet >

  < f: facet name = "pathStamp" >

  < af:outputText value = "#{node}" id = "ot2" / >

  < / f: facet >

  < af:column FROM HERE... >

  Any ideas greatly appreciated.

  Hello

  Try to use a blender to distinguish three levels of the tree. You can have three different facets, three different af:group's.

  When you add at one level, it will not repeat in the other classes.

  Please see the excerpt below.

  selectionListener = "#{bindings." RefBusinessUnitView1.treeModel.makeCurrent}.

  rowSelection = "single" id = "t1" >

  facetName ="#{node.hierTypeBinding.viewDefName}">

  Alisson

• How to get the value of the tree node without reloading the Page. !

  Hello
  I worked with apex 4.2 and I've created trees and as a table to retrieve the date according to the value of the tree node select the code tree something like that
  
  {
  Select case when connect_by_isleaf = 1 then 0
  When level = 1 then 1
  of another-1
  end the status,
  level,
  'ENAME' as the title,
  NULL as an icon,
  'EMPNO' as value,
  NULL as ToolTip,
  ' f ? p = 36648:34:5234984107903:P40_SELECTED_NODE :'|| EmpNo as link
  "Dept". "" EMP ".
  Start by "MGR" is nothing
  connect prior "EMPNO" = "MGR".
  siblings arrested by 'ENAME '.
  }
  and I put the Page selected node element: P40_SELECTED_NODE. the tree worked well and recover the data in tabular form according to the value of tree node
  
  My Question:
  1. I want to recover the data without submitting the page where whenever I select the value of the tree make page reload to update the tabular presentation with the new value, there is a way to convey the value of the tree node to point P40_SELECTED_NODE and in the form of refreshment without page reload.
  
  2-i want when selected in the page tree run process according to the value of the on-set tree node to create dynamic action with (jquery selector: div.tree li > a) but the value of the incorrect node.
  
  Concerning
  Ahmed;

  Take a look at my sample tree application.
  When you select a node, a details report is updated. That should help you implement for your situation.
  However, one thing to note is the link on each node that you have. Click on a node to redirect to the same page and set the value of P40_SELECTED_NODE. You can keep the element, but the link should go, as it's him "reload" the page whenever you click on a node. Implementation of the action of "onselect" tree and setting the page element to the value of the node that will be in place. Be sure to add the page element in the elements present in the form of tables.
  The reason why your selector didn't return the correct value is that you have a click event bound to the anchor tag in each element of the list. The anchor tag does not hold the real value (usually and id), but holds that the display value. The items list item containing the real value in their attribute "id". Therefore, to get this value you should always inspect the first parent of the clicked anchor tag. (which is another way to solve it, of course)

• Tree node in data recovery for the 1st node only for the 3 data blocks?

  Hello alllll
  
  I have 3 BLOCKS of DATA master / detail-detail; GL_TYPES - < GL_ACCOUNTS - < GL_COMPANIES
  
  The Rel attribute between 1 and 2 is
  

  GL_ACCOUNTS. TYPE_ID = GL_TYPES. TYPE_ID

  is between 2 & 3 ADR
  

  GL_COMPANIES. ACCOUNT_ID = GL_ACCOUNTS. Account_id

  I have also a Tree is recovering the data in blocks of data, the following code, used in the trigger WHEN-TREE-NŒUD-SELECTED and it works fine, but not for all nodes;
  the selected node displays the data for the first node only. Assets to say but if I chose to any other node it returns no data?
  
  you could any boady pls explain to me why what is happening?
  
  The following code is:
  -----------------------------

  DECLARE
                      
          htree ITEM;
          NODE_VALUE VARCHAR2(100);
  
   BEGIN
  
   IF :SYSTEM.TRIGGER_NODE_SELECTED = 'TRUE' THEN  
        
  -- Find the tree itself.
  
   htree := FIND_ITEM ('BL_TREE.IT_TREE');
   
  
    NODE_VALUE := FTREE.GET_TREE_NODE_PROPERTY( htree, :SYSTEM.TRIGGER_NODE ,  Ftree.NODE_VALUE );
    
  
    GO_BLOCK ('GL_ACCOUNTS'); 
      
     set_block_property('GL_ACCOUNTS', DEFAULT_WHERE, 'GL_ACCOUNTS.ACCOUNT_ID = '  || 
     ftree.get_tree_node_property('BL_TREE.IT_TREE', :SYSTEM.TRIGGER_NODE, FTREE.NODE_VALUE));
  
   EXECUTE_QUERY;
   
   END IF;
        
   END;
  
  
   

  Kind regards
  
  Abdetu...

  I would say there is nothing in relation to tree now. Because the tree is to give the appropriate value for the setting of the block where clause. Check the relationship and that the cursor goes to the block expected where the data must be retrieved. Like you said tree account id that the tree is from the correct values.

  -Clément