extraction to a minimum and the next minimum value in each row of a matrix

Similar Questions

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Extract Pages... and the Split... do not do what I expect

  I have a document created in Illustrator (CS4), which has several work plans. I want that it split into several documents, Board of Directors an art - > a document with only this work. When I use the extract PAges... and the Split... orders to generate multiple documents, I get the multiple docs (same number of documents created as pages in the original document).

  The only thing is that every doc has all work plans and all works of art like the original doc. I couldn't understand all the works of art being there but all the plans of work also? What is going on?

  Appreciate the pointers on this.

  Writing a JSX to run in artificial intelligence, but hurt so far. Wire for solution started here: AS) export PDFs single page of work multi-plans

  No worries.  Just try to get a handle on the issue.  I think that we are talking in different worlds.  I wrote to the Acrobat and PDF software for 10 years, printing, processing documents, forms, etc. name you it.  I have never worked with Illustrator, never heard of work plans and never seen references that you use.

  see you soon,

• an analytic function can be used to get the next largest value?

  I have a table with the values as follows:
  
  ID term val
  1 200720 aaa
  1 200720 bbb
  1 200720 ccc
  1 201220 ddd
  1 201220 eee
  
  2 200720 qqq
  2 200720 rrr
  2 200920 sss
  
  What I need, is to get the value of the next higher period (999999 if not exist) for each id line, like this:
  
  ID term val next_term
  1 200720 aaa 201220
  1 200720 bbb 201220
  1 200720 ccc 201220
  1 201220 ddd 999999
  1 eee 201220 999999
  
  2 200720 qqq 200920
  2 200720 rrr 200920
  2 200920 sss 999999
  
  I tried lead futures partitiion by id, but that just gives me the value in the next line. I watched windowing, but my eyes crossed. Any ideas? I need the next highest value not the value in the next line. The value of next_term must never be identical to the value term
  
  CREATE TABLE WJPTEST
  (
  ID VARCHAR2 (3 CHAR),
  VARCHAR2 (6 CHAR) TERM,
  VAL VARCHAR2 (3 CHAR)
  )
  ;
  
  Insert into WJPTEST
  (ID, VAL)
  Values
  ('1', '200720', 'aaa');
  Insert into WJPTEST
  (ID, VAL)
  Values
  ('1', '200720', 'bbb');
  Insert into WJPTEST
  (ID, VAL)
  Values
  ('1', '200720', 'ccc');
  Insert into WJPTEST
  (ID, VAL)
  Values
  ('1', ' 201220 ","ddd");
  Insert into WJPTEST
  (ID, VAL)
  Values
  ('1', ' 201220 ","eee");
  Insert into WJPTEST
  (ID, VAL)
  Values
  ('2', '200720', 'qqq');
  Insert into WJPTEST
  (ID, VAL)
  Values
  ('2', '200720', 'rrr');
  Insert into WJPTEST
  (ID, VAL)
  Values
  ('2', '200920', 'sss');
  COMMIT;
  
  Published by: wjpenfold on 12 June 2012 10:08

  wjpenfold wrote:
  what I want is the next largest value that may never be the same value as the current line. I'm working on getting the code example.

  What are the increments of TEMP? Assuming that the TERM cannot grow less than 1:

  NVL (Lead (term) OVER (PARTITION BY id ORDER BY term RANK BETWEEN 1 NEXT AND UNBOUNDED FOLLOWING), 999999)

  For example:

  select  sal,
          NVL(FIRST_VALUE(sal) OVER (ORDER BY sal RANGE BETWEEN 1 FOLLOWING AND UNBOUNDED FOLLOWING),999999) lead_sal
    from  emp
    order by sal
  /
  
         SAL   LEAD_SAL
  ---------- ----------
         800        950
         950       1100
        1100       1250
        1250       1300
        1250       1300
        1300       1500
        1500       1600
        1600       2450
  
         SAL   LEAD_SAL
  ---------- ----------
        2450       2850
        2850       2975
        2975       3000
        3000       5000
        3000       5000
        5000     999999
  
  14 rows selected.
  
  SQL>  
  

  SY.

• Media Center Question can I have set up as a server and the other two as clients, each using two of the tuners of the card?

  I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.

  Any ideas?

  On Fri, September 19, 2014 12:28:56 + 0000, SamJ008 wrote:
   
  > I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.
  >>
  >>
  >>
  > Any ideas
   
   
  Start reading here
  http://TheDigitalLifestyle.com/w/index.php/2010/01/29/why-all-the-excitement-over-network-tuners/
   
  You will not be able to use your existing tuners like tuner network. Microsoft has
  arrested development of Media Center, so don't expect any new hardware/software to
  appear.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Determine the maximum value and the minimum value for each value in the 2D array

  Hello, I need help please. Sorry my English is not very good. I have table 2D in which each value describes a waveform, I needed a time interval to determine the minimum and maximum value of each element of the array.

  
  

• change the language, it worked and the next day it didn't

  on my new computer, I added the Russian language and got an icon with Russian and English on the desktop. I tried in Microsoft Word, and it worked fine. The next day, I tried to change the language, the sowes of the Russian icon, but when I try to type is englishRemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  No guarantee:

  Try doing a system restore. Choose the date before you had this problem as your restore point.

  Start button > Search box, type System Restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How can I get a report containing data on the current month and the next month

  How can I get next month?
  I want a report that include data on the current month and next month.
  
  My solution is "Closing Date". "" Fiscal month "> = Valueof (NQ_SESSION. CURRENT_MONTH)
  S 'closing Date '. "" Fiscal month "< = MONTH (CURRENT_DATE + 30)
  
  But this show only the information between the current month and the date of the day + 30 days
  
  Does anyone have a better solution?
  
  You can meet the next email [email protected].
  
  Greetings!

  GON,

  Add the near field date in your report, add a filter and choose between. Place the cursor in the first box and select Add - SQL expression, paste into the first expression that I gave you. Repeat for the 2nd box and voila it will filter you need. If you are unsure, then use the superior / equal to the value for the first term and the lower than the 2nd.

  see you soon
  Alex

• It comes to DEME past in FireFox, the tetter to the right of the key 'k' is coding as a 't' and the next key to the right is coding as an "F".

  It is DEME past in FireFox, the 'L' key is like a 't' and the key encoding ';' is coding as an "f". At first, I thought that my keyboard came out, but Firefox is the only program that does this. All other keys seem to work correctly. This question reads correctly because I wrote in wordpad and copied in FireFox.

  Have you tried restarting the computer?

  It is possible that you have activated the keyboard by accident using the sequence of keys to rotate the page layout.

  • http://support.microsoft.com/kb/258824 - how to change your keyboard type

  Windows remembers the setting by application keyboard layout and you have probably changed the keyboard by accident via a keyboard shortcut.

  • http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview The language bar (overview)
  • Make sure you have the language bar visible on the Windows taskbar
  • You can do this via the context menu of the taskbar: toolbars > language bar
  • Check the language setting (keyboard) keyboard for the application that has focus via the icon in the language bar
  • You need to do that while Firefox has focus because Windows remember the keyboard by application setting
  • The combination of default keys to rotate the disposal is the Ctrl + Shift or Alt + Shift key combination that is used in Firefox to the menu items, so it is quite possible to accidentally changing the layout.
  • To avoid an unintended switch, assign a specific keystroke (Alt / Ctrl + Shift + number) to select keyboard layouts and remove the key combination to rotate (Alt + Shift or Ctrl + Shift) layouts
  • Control Panel > regional and Language Options > keyboards and languages > change keyboards > advanced key settings > change key sequence

• on my laptop I have a sign of bluetooth previou day luminous sign is turned on and the next day, he does not appear and also nat open bluetooth change the seting wht can do for this

  Please answer me soom me wory very

  Hello

  · What is the number and the model of the computer?

  · What is the Bluetooth device built into the computer?

  You can check the link below and try the steps listed and check to see if this helps: how to solve the problems of connectivity and Bluetooth detection in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

• To return the rows less value and the next line of the value 'hungry '.

  I'm about 10 gr 2
  
  My best here trying to just do a single SQL rather than writing PL/SQL. I know it's possible, that I'm not good at SQL past oracle 8i. I have searched the forums and found many examples for the beaches and dates to help connect by level, but nothing specifically related to the scales of value.
  
  Basically I have a table with the number of employees and approval limits:
  

    with  a as (select 12345 emp_no,1000 val from dual 
                   UNION select 12346,5000 from dual UNION select 12347,9999 from dual)
    select * from a 

  Returns
  

  EMP_NO  VAL
  ------- ---------------
  12345   1000
  12346   5000
  12347   9999

  I want a SQL statement that returns all lines less that the & parameter, but also the line of 'the child' who, as "greater" as the largest value of the value to be less than the value parameter.
  
  It is probably easier to show examples.
  
  If & parameter was broadcast then 2342
  

  EMP_NO  VAL
  ------- ---------------
  12345   1000
  12346   5000

  If & parameter was broadcast then 7898
  

  EMP_NO  VAL
  ------- ---------------
  12345   1000
  12346   5000
  12347   9999

  If & parameter was broadcast then 10
  

  EMP_NO  VAL
  ------- ---------------
  12345   1000

  If & parameter was broadcast and 788777
  

  No rows returned 

  Basically, I'm trying to return the chain of trust that a Bill will have to cross before it can be approved until the & amount of parameter.
  
  Tried to connect, even lead function. Request for assistance from the gurus to do things. Hope that this could also help others.
  
  Published by: user13007502 on February 8, 2012 04:56
  
  Published by: user13007502 on February 8, 2012 04:58

  Hello

  Here's a way (very similar to what Peter posted previously):

  SELECT     *
  FROM     a
  WHERE     val     <= (
                 SELECT  MIN (val)
                 FROM     a
                 WHERE     val > 3000     -- or whatever
               )
  ;
  

  If the parameter is greater than any what val in the table, then the scalar subquery terturn will be NULL, and the WHERE clause will never real.

• Difference between the intensity and the gray scale value

  Hi I am a new learner of vision of NOR, please bare with me.

  1. I'm quite confused by the terms of light intensity and pixel gray scale value. Can someone explain the difference to me? Or are they the same thing?

  2. I'm currently treat an image in grayscale (I16) file. The number of bits of the image is 12 Bits. But I saw that someone used IMAQ polygon with the number of Classes as 8192 (13 Bit), don't know why.

  Thank you, Jane

  Hello Jane,.

  1 OK, grey scale and intensity are the same thing.

  2. the number of class you choose is an appeal from the judgment.  By increasing or decreasing the number of more or less granular classes, the histogram becomes.  Without a context, I can't speculate on why someone use 8192 classes.

  David has

• Need to convert the Varchar2 column number for the extraction of data based on the range of values.

  Hello

  I have a ZIP column which is the Varchar2 data type, it has values such as 2345, 09485, 10900, 07110, 06534.

  I have to go look up records from the range of values for the ZIP column as between 00000 and 07500.

  Could you give a logic.

  Thank you.

  Hello

  I think you can use the following code:

  SELECT T.*

  OF t

  WHERE the to_number (ZIP) between TO_NUMBER('0000') and TO_NUMBER('07500')

  ;

  CGomes

• Select from a drop-down list and the specified element values are displayed in the textfield

  I need for one to be able to select from a list drop-down and specified the item values appear in textfield.

  For example, if I select Amy

  If I select Bob

  If I select Jane

  Amy

  Bob

  Jane (I want to appear as shown in the list)

  I associated a value to each item in the drop-down list so that the choice is easy to compare and determine what initial (default) value to the value in the text field. In my drop down list change event, I have the following:

  var sNewSel = this.boundItem (xfa.event.newText);

  Switch (sNewSel)

  {

  case '1': / / Amy

  TextField1.rawValue = "Amy \n";

  break;

  Switch (sNewSel)

  {

  case '2': / / Bob

  TextField1.rawValue = "Bob \n";

  break;

  Of course that's not work one name shows at a time. Help, please!

  Thank you

  Don't know what the code is supposed to do, but basically, you want to add the name of the drop-down list the addition on the current value of the TextField? Why not use the dropdownlist display value directly? For example on the change event:

  if ( TextField1.rawValue == null )
      TextField1.rawValue = xfa.event.newText;
  else
      TextField1.rawValue += ( "\n" + xfa.event.newText );
  

• How to create parameters and the list of values in BI Publisher

  Hello friends,
  I use BI Publisher 10.1.3. I tried to create a report based on the data of a column for ex: dept_no
  in the data model, I specified the name of the table to select all columns
  I created the list of values taken as a query sql-type. in the query I wrote dept_no Department selection
  In the settings section I gave him as an integer value, and by default as * parameter type in the menu then I chose the name list the value that I've previously specified...
  now the problem is when I run the report I receive all data despite selecting the parameter I need particular data of this deptno
  What could be the reason
  pls let me know
  Thanks and greetings

  In your main data model query, you use this parameter to limit the data for the selected service?

  For example. Select dept_name of departments where dept_no =: p_dept

  where: p_dept is your parameter...

  Thank you!