Extreme slowness of local area network and Time Capsule wireless speeds

Similar Questions

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Airport Extreme and Time Capsule of airport work together?

  I have time capsule and airport extreme. I need to decide if I should sell Airport extreme or is there a way for the two to work together to expand the wifi. Airport extreme can be connected to time capsule and extend the range?

  AirPort Extreme can extend the time Capsule network in one of two ways:

  (1) for the best performance, the AirPort Extreme is located in the heart of the area where most of the wireless coverage is needed, and it would connect to the time Capsule using wired Ethernet wired, permanent.

  (2) AirPort Extreme can connect to the Time Capsule wireless network and to extend the network in this way, if you're ready locate AirPort Extreme to halfway between the Capsule and the area that needs more coverage wireless... And... accept a drop in performance of half of the potential maximum speed on the network.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• What happens if I uncheck all the properties of LAN (Local Area Network)?

  What happens if I uncheck all the properties of LAN (Local Area Network)? My machine OS is Windows XP Home Edition / 2002 Version / SP3 and I have a wireless connection. My connection to the LAN is disabled, currently, I don't have the desire to create a network, and I will in the future.

  Hi Bobby Collas,.

  There is no problem, when you turn off all the options in the properties of the local area network (LAN).

  You will not be able to connect to the Internet or use the connection to the Local network.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• How to allow access to a local area network behind the cisco vpn client

  Hi, my question is about how to allow access to a local area network behind the cisco vpn client

  With the help of:

  • Cisco 5500 Series Adaptive Security Appliance (ASA) that is running version 8.2 software
  • Cisco VPN Client version 5.0 software

  Cisco VPN client allows to inject a local routes in the routing table Cisco ASA?

  Thank you.

  Hi Vladimir,.

  Unfortunately this is not a supported feature if you connect through the VPN Client. With VPN Client, that the VPN Client can access the VPN Client LAN host/local machine, not host from the local network to business as customer VPN is not designed for access from the local company network, but to the local corporate network.

  If you want to access from your local business to your LAN network, you need to configure LAN-to-LAN tunnel.

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• What wireless network for Time Capsule backups?

  Just installed a new Capsule of time at home. The time Capsule is a wireless router, and I can connect all my devices wirelessly to the Network Time capsule wireless. I still 2 other active wireless networks because I use 2 additional wireless routers for access anywhere in the House. All three of my wireless networks are created from the same internet modem. I want to confirm is whether or not my Mac can be connected to one of the 3 networks for automatic backups on the Time Capsule wireless? Or is the Mac must be connected to the network of the time Capsule for automatic backups to time capsule wireless? Thanks in advance for your help.

  The same as the TC.

  Set the other to extend the network of transport CANADA instead of create a network.

• SB6141 and Time Capsule works best not Modem?

  I bought an ARRIS / Motorola SB6141 modem yesterday, unfortunately without checking here first of all support and as much I having trouble to get a SB6141 and Time Capsule to cooperate.  The modem works fine with a hard line, but when I plugged in my Time Capsule for the modem I got the dreaded flashing yellow on the TC light. Three hours of reading posts here (and elsewhere) and troubleshooting later and I am still at a loss. Rather than the fight over trying to get the SB6141 to work, I would rather just buy a modem that works (at least mostly) with the TC. I am in the area of Chicago on Comcast. List of approved here modems. Please let me know if you have found a good modem to use with time Capsule. Thanks for any help!

  Additional details - I bought time Capsule 2 TB in March this year and it's all so far (ongoing enforcement, I think, 7.7.3)

  Not on Comcast, but the use of two modems in rotation.

  Zoom 5341J and Netgear CMD31T, who all have both been impeccable since they went into service almost 2 years ago.

• I have an IMac with time machine and time capsule. If I buy a big disk external hard can I save all my Lightroom Info to go to time machine, & that it saves on hard drive new, after he made a backup to time capsule.  In this way I'd have t

  I have an IMac with time machine and time capsule. If I buy a large external hard drive can back up all my Lightroom Info but also everything else to go to time machine, & that it saves on hard drive new, after he made a backup to time capsule?  This way, I would have two backups.

  Hi marinersr,

  I'm not sure the backup machine capsule/time, but according to me, that it backs up all data on your hard drive.

  Yes, you can back up the Lightroom catalog on the hard disk external.

  You can set the time of the backup under the catalog settings > backup > he would invite to the backup, when you exit Lightroom > click on select next to the location and specify the location as your new hard drive.

  If you want images of both original backup, you can configure to create a second copy of the images on your external drive during import.

  Kind regards

  Claes

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• Satelite C50 - B cannot connect to wireless local area network

  My brand new straight out of the box Satelite C50 - B cannot connect to my wireless network, when you are running Windows 8.1.

  When you run the wizard for the first time user, it was unable to connect to my network to register. And I have been unable to connect after starting the OS, even if my thread was visible and the signal strength would be strong. I entered the security network key, but the message came back "unable to connect to this network.

  However, when I started on a USB key to run Linux Mint 17.1, it took less than 5 seconds to connect to my wireless network. If the Toshiba hardware work properly, as also my wireless LAN.

  If I plug in a network cable, same Windows connects to my network and Internet.

  However, given that the C50 - B satellite comes with Windows 8.1 both of wireless capabilities, I was hoping someone here might be able to help me get a wireless connection in Windows.

  It's really strange. I have S50 - B and WLAN works properly. I used my laptop connected to several different networks and everything was OK.
  You can try to test with different wireless LANs?
  Have you checked all the WLAN settings?
  Try restarting your router.

  I mean if your laptop can detect WLAN, this means that the hardware is enabled and working properly. There must be a problem with the WLAN settings.

  Also check the advanced power settings, and then set it to maximum power WLAN.

• Windows 7 64-bit extreme slow Spooling/printing to network printer

  I am running Windows 7 64-bit and have a Konica Minolta Bizhub C200 as a network connected via "Standard TCP/IP Port" and Protocol LPR printer.
  My problem is extremley slow printing/winding queue takes very long and even if the queue is full it still takes time for printing to be recognized by the printer.
  I don't know if it's a problem of network or Win 7 as previous XP machinewith the sameprinter and the installation program had no problem, I installed the latest printer driver but it's dated from 31/10/08 so don't know that if there is a problem, he said the pilot was compatible with Win7.
  Any solution would be grateful.

  Tried all the methods, but no difference so my conclusion was it takes the printer itself...
  Checked over the printer setting, discovered 'Network Council Set' and changeda to 'Auto' and now the print speed is what it was before.

  Thanks for the help.