extremely slow response on mac, used to work properly, the difficulty?

No matter what I'm doing with TB on mac (OS of Yosemite, latest version of TB) it is extremely slow and unresponsive, tried uninstalled and installed again without success

You still see the problem?

Tags: Thunderbird

Similar Questions

  • says I have emails, but not down load them - used to work properly

    says I have emails, but not down load them - used to work properly.

    For an example says that there download 1 / 6 after awhile, he says no new messages. I can check my email from another source and see that I have 6 messages and am able to read them. I ran scan programs and malware and clear up all the problems, they found that Thunderbird is not download again. I'm on the latest version 31.6.0

    This is probably one of these programs of malware or anti virus which is at the origin of the problem. Disable the e-mail in your anti virus and restart your computer. Best? What anti virus is it anyway?

  • I had to uninstall Acrobat Reader DC and back to Acrobat Reader 11 for software we use for work.  The problem is that after I did my Internet Explorer gives a message that the plugin player DC is missing?  I reinstalled DC and uninstalled again with

    I had to uninstall Acrobat Reader DC and back to Acrobat Reader 11 for software we use for work.  The problem is that after I did my Internet Explorer gives a message that the plugin player DC is missing?  I reinstalled DC and uninstalled again without success.  Any suggestion would be appreciated.

    You can try to use this tool first remove all traces of your computer:


    Then you can download the full Setup offline reader for the version you want from


    After downloading, restart your computer and run the Setup program before anything else.

  • Slow Internet on Mac using RV082

    I had problems with the speed of internet connection on my Mac. Initially, I noticed the problem when my mail kept calendar whenever I sent an attachment, I went on various forums, trying to find the solution but nothing has really worked, then I found workarounds for e-mail and lived with her. Recently moved the company that I work offices and I was no longer behind the RV082 and my internet ran better despite the slower connection. Once we have finished the move, I needed to use the Dual Wan Load Balance of th RV082 feature so I put in place in the new office and my internet is slow again. Unfortunately in the new office there are several Macs more than just mine so I really need to make it work. Currently we have 2 separate networks for PC and Mac and I really need to get them on 1. Is there a setting that I can have forgotten or is - is not going to work with Mac. I wonder if it causes a problem with just my router I don't think anythign on this subject online.

    It seems to me that you may be running Leopard or higher. One thing to watch is IPv6. To keep things simple, disable IPv6 on your Mac (only one) and see if that makes a difference. With 10.5 and later versions, intensifies the transition to IPv6, inappropriately just devices do not play nice. Also do a little Google search on "How to speed up Firefox on Mac" and you will find a few articles with steps on how to disable IPv6 on the browser.

    Let us know if you still have any questions.

  • Someone knows the extremely slow response and delay with "not responding" on more complex web pages after installing updates on Friday?

    Since the installation of 16 Nov received security patches I've known really slow response with Internet Explorer; 2 minutes between web pages on my WIN7 Pro PC and not much better on my VISTA Business PC.  I get expired on complex web pages the context comes up with "program addresses not" or the pop-up at the bottom of the screen asking me to do it again.  The problem is not limited to Internet Explorer, but also prevents Safari to come.   I tried to reinstall WIN7 Pro, but the problem remains.  I'm also not able to run You Tube or other videos.  There is no download or updated or running Belarc Advisor Windows installation problems.  While the problem occurs with Yahoo Mail, it is not an impact send/receive in Outlook.  Does not appear to impact, nothing other than browsing the web.

    Hi ephd,.

    Thanks for posting in Microsoft Communities. The problem description, I understand that the internet works slowly. Provide the following information:

    ·         Have updates you installed?

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check.

    Startup options (including safe mode)

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Internet Explorer is slow? 5 things to try

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    You can see these articles for more information:

    Why is my Internet connection so slow?

    Windows wireless and wired network connection problems

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • E:, HP ENVY, HP ENVY 4500 4500 don't scan pdf for MAC, only jpeg; used to work properly.

    HP ENVY 4500 worked fine a month previously, now don't scan pdf for MAC, jpeg only.  Also do not accept the file name.  Is there a doctor of printing & scanning HP for MAC?

    Hi Maryjon , thanks for getting back to me!

    I appreciate the info.

    I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

    Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

    I also run your Apple updates: OS x: Mac App Store apps and OS X update

    After the updates, I recommend you to reinstall the series HP ENVY 4500 full feature software and drivers.

    Good luck and please let me know how it goes!

  • I have been experiancing crashes to the desktop when running The Elder Scrolls IV: Oblivion even though he used to work properly on my computer

    I am experiancing crashes to desktop when I try to click on the main menu of the game oblivion. I've had the game for a long time and it worked when I tried it (about a year). But now it crashes whenever I click on something in the main menu. I don't remember any specific major changes that have been made to the computer, because it stopped working because I haven't used the game in more than a year, but I tried several methods of attachment:
    I scanned the folder with oblivion.
    I defragment the hard drive.
    I deleted the temporary (more) files.
    I tried running it in both safe mode and clean the boot it. (Safe mode worked for consolidated first half an hour when it also crashed)

    My computer has been working with the program in the past, so I think that my computer should be able to run again:
    Windows Vista: ultimate
    Model: Inspiron 53OS
    Processor: Intel (r) Core (TM) 2 Duo CPU @2. 33 GHz
    Memory (RAM): 4.00 GB
    ATI Radeon HD 2400 Pro

    You have any ideas on what I can do to fix this?

    Hi SLFHer,

    Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Measures to check the application event log:

    1. click on start.
    2. in the search box type eventvwr.msc, and then on enter.
    3. now, click Application in the event viewer (local).
    4. now locate the event log on the right side of the event viewer window.

    For more information visit: http://windows.microsoft.com/en-us/windows-vista/Open-Event-Viewer

    Alternatively, you can try to update your video card driver and check if that helps.

    Steps to update video card driver:
    a. click the Start button.
    (b) in the search box type devmgmt.msc and then press ENTER.
    c. Select the video card device and right click on it
    d. now, select Properties.
    e. in the Properties window, on the driver tab, click Update driver.
    f. after the installation of the updates, restart the computer.
    For more information visit http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

    Hope this information is useful.
    Umesh P - Microsoft Support

  • Setting up wifi with ethernet (wifi used to work properly)


    I use the WRT54G2 with my modem cable (from Optimum Online) for a long time, like a wifi router. Several devices (laptops, ipads, iphones, etc.) bound to it, WPA2 security, everything is good.

    Now I need to have a laptop connected via an ethernet connection - to make things a bit more complicated, the ethernet cable is actually passed through a phone, Polycom IP from the router on my laptop. It works fine, I have internet on the phone and the laptop. However, my wifi disappears now other devices.

    I assume that the ethernet is supported when the cable is connected, so when I disconnect wifi back upward.

    How can I implement both work at the same time in different devices?

    Any help is appreciated

    Don't know if I can delete the post, but now I just solved my problem. Changed channel 6 to 11 and all wifi works.

  • Computer laptop everything suddenly does not "see" my wireless router, use to work properly

    I have a HP laptop and it has implemented a wireless network a wireless d-Link N router.  Everything worked well for about 3 months.  Now, he can not connect.  Running the troubleshooting application to choose a connection - all my neighbors show up, but not that of my house.  The router is also new (he and laptop were Christmas gifts).   It used to work fine with Windows 7 one and now nothing...  I can't it appears in the list of wireless connections.
    My laptop 5 years running XP is in line with this router and it works fine - so I don't think that it is the router that is the problem.
    Thank you!

    Hello Bchek,

    Thank you for your message.  Check with your D-Link documentation and settings to make sure that the SSID broadcast has not been disabled.  This would prevent you from being able to see the wireless network.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • How to transfer files from old mac (using Lightroom 4) to the new mac (using Lightroom 6)?

    I have an old Mac using Lightroom 4. My new Mac has 6 installed Lightroom. I want to transfer the entire photo collection and catalogue more to the new computer in Lightroom 6. I tried that already use an external hard drive, but the photos in the Collection of photos all appeared as gray boxes (no visible pictures). So, what's the right way to transfer photos via so that Lightroom 6 look at the way he was on LIghtroom 4?

    Any help is appreciated.


  • My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

    My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

    You don't say what you mean by not working not properly, however...

    Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

  • Pinch zoom opening and closing (mac) does not work in the last beta update

    Anyone know why pinch open close to the pavement of mac suddenly not zoom the last updated beta?

    Preferences that control this action have been reset to empty strings.

    You can use the related browser.gesture preferences to change these values to restore the old behavior:

    • Browser.Gesture.Pinch.in-> cmd_fullZoomReduce
    • Browser.Gesture.Pinch. in.shift-> cmd_fullZoomReset
    • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
    • Browser.Gesture.Pinch. out.shift-> cmd_fullZoomReset
    • Browser.Gesture.Pinch.Latched-> false
  • El capitan extremely slow on end of 2013 iMac, especially at the start (5 minutes)


    Recently, I went from an iMac end 2006 (installed 10.7.5) to a new end 2013 iMac (with el capitan) using the migration wizard.

    My new iMac literally crawls at the start: before being "usable", it takes all five minutes to present the elements of office and start (I only dropbox, 1Password, Alfred littlesnitch enabled and I cleaned all the startup and user logon items old and systemic); After this the iMac works very well, even if it's not lightning fast I must say (looks like a little lag is present for each new task: opening applications, files and so on).

    As soon as the iMac starts a time machine backup is started automatically.

    I used etrecheck and nothing significant has shown and also one of the @linc scripts used to test the system (unfortunately, I'm not really able to fully understand the results, but perhaps that something is 'locked'...).

    Console is spammed with messages, especially at startup but projector not only in regard to, mds, xpc...

    I will post any other relevant information as requested, if anyone is willing to help.

    Thanks in advance


    Without posting actual results Etrecheck and/or Linc-script, nobody will be able to guess what is happening.

  • LaserJet 100 color MFP M175nw: Laserjet 100 color MFP M175nw will not connect wireless - used to work properly

    OK - I'm out of here.

    I've owned a Laserjet 100 color MFP M175nw for awhile, and it worked perfectly.

    Installed the software for 2 computers at home and everything worked well.

    Last week, I changed the password to my router for the home network.

    The printer showed as "offline".  I couldn't change the status.

    After much trying I totally uninstalled the software, deleted the printers on my PC and reinstalled.

    I run the installer - tell him I want to go and so that it can detect my wireless network settings.  (I also tried the option where I have to enter the information manually). All else fails.

    Setup starts and then asks me to install the USB cable.  I do that and the installation program is going very slowly (I mean it crawls along) and wrote "Product has been detected", "Waiting for installation of the product at the end. Then I get a big red 'X' and it is said that it took too long to run and a fatal error occurrred or he tells me that it cannot find a product to install.  If I run the installer and say USB only, it works very well.  Ugh.

    When I press the button on the front panel wireless and it flashes only and that's all.

    Here's what I did - full power / turn off the PC and the router.  Updated the firmware of the printer used the new installer (all from the HP website).  Tried it on 2 different PC to ensure that it was not isolated.

    The USB cable is good because after the failure, I can print via USB (I lost a forest to print the test pages).  Same PC and OS for both when I bought the printer.

    Ironically, I spent several years in this DOCUMENT, so it's not familiar works for me, just very frustrating!

    Well, I finally had it - realized that the WIFI adapter on the PC had to have the new password entered.

    It was step 1.  Step 2 followed another post where I attached the printer directly via ethernet to the router cable, and once the IP address appears in the menu of the printer, I entered on my browser and the name of the router is entered, pw and managed to turn off the wireless printer on.  Then, by running the installer worked like a charm.  Woo-Hoo

  • Volume F4 - F5 key on the keyboard for mac does not work on the microsoft side

    Volume F4 - F5 on the keyboard for mac key does not work... on the side of microsoft may not decrease or increase volume


    ·         What do you mean by Microsoft Side?

    ·         Have you tried to update the latest audio drivers for the computer?

    ·         Were there any changes made on the computer before the show?

    Also I suggest you to contact the Apple support:


    See also: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

Maybe you are looking for

  • Menu disappears

    Using FireFox ESR 17.011. This just started recently. When you open a menu on the menu bar, the pane menu open and initially displays the menu options, but will disappear, somehow. It's almost as if he puts the menu in the background because there is

  • EliteBook 8460 to TV

    Can a HP elitebook VGA 8460 be connected to s-Video on a TV or another option of Thank you Mike

  • T510i screen suddenly darkens & increases the gamma

    From time to time, the screen suddenly fades, and the gamma increases. This has nothing to do with the brightness settings, since they remain the same (and indeed, increase the brightness still works, but the brightness (maximum) overal remains lower

  • Movie maker Cd won't play

    I can't do any CD or DVD that I burn from Moviemaker to play on my dvd player. Someone knows why

  • RE6500 Setup\IP Address\Range Extender

    I have a RE6500 used with a WRT AC 1900 as the router. The range is too far to reach the other floors and the pieces away from the House. So the questions are: should I use a static IP address for the RE6500? Should I Park the RE6500 and replace it w