Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

I also ran Malware Bytes and the analytical results were clean.

Any ideas appreciated!

can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return

Tags: Linksys Routers

Similar Questions

  • Extremely slow scrolling of Web pages on Tecra M5

    I have a Tecra M5 and on the web pages, when I'am scrolling, it is extremely slow and the photos roll up like blinds.
    What could be the problem with that?

    And how do scroll you? Do you use an external mouse or scrolling on the touchpad?

  • "A computer at 192-168-1-1 has attempted to access one of the ports on your system (PTC port 2869) the source IP is an IP address that is not routable"

    This has happened on an incredible pace.  It worries me due to the fact that I had a procedure of detail with suppliers in Hong Kong.  Access attempts are extreme, as well, noted that it is access to Blackhole.  I need to know if my computer is in danger and if so how to avoid this problem.  Of note is that I use Facebook and you have Hotmail.

    The IP 192.168.1.1 is usually a router. What network equipment do you use? What program are you getting this error? Look at this thread:

    http://www.wilderssecurity.com/showthread.php?t=59493

    Try to disable the PnP features of the router and see if that solves the problem.

    I doubt that this has nothing to do with sellers in Hong Kong but if you want to make sure that your computer is clean, being proactive and scan.

    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    MS - MVP - Elephant Boy computers - don't panic!

  • A single user extremely slow entry response... can't type... seconds

    Dell XPS L701X Windows 7 SP1 64 bit OS Windows experience index IE9 6.9

    Problem: very slow (useless) response to the keyboard, the mouse on a user input

    Having extremely slow response using the browser on an account on my Dell XPS, which is not run as an administrator.  See for a few seconds, as you type, or can use side pull-down screens, etc...  Have run scans, deleted all the programs of extranious, rebooted, defrag'd, compared to run programs, between the work of user (run as admin)... all to no avail... any ideas on how to determine and solve this problem?

    Tried to use Safari instead of IE that works very well...   Enabled the GUEST account which is really crazy... creating a screen frozen with empty caption area Google and BING matter what cursor does not...

    Hello

    Welcome to the Microsoft community. According to the description of the Internet Explorer 9 works slowly in a user profile. Provide the following information:

    ·         You get the error message?

    ·         Did you do changes on the computer before the show?

    I'll help you with this problem. I suggest you follow these methods.

    Method 1: It could be a problem with the profile of the user. Follow the steps in the article to fix a corrupted user account.

    Difficulty of a corrupted user profile

    Method 2: Follow the steps in the article.

    Web page with complex graphics opens slowly in Internet Explorer 9

    Internet Explorer is slow? 5 things to try

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

  • ADE 2 is extremely slow in the presentation of the ACSM files

    I bought a document that is in the format of the CMHA.  I don't know about this format.  ADE 2 appears to download the data and displays the pages, but is extremely slow in the pages of scrolling.  So slow they are useless.  Any change takes forever to accomplsh. I use an Apple MacBook Pro OS 10.8.3.

    I have no problem with reading all the ADE 2 "Getting Started" of the file that is unfolding as I wish the application to run.  I am considering the removal of 2 ADE and download it again, but am worried how that would effect the process of validisation.

    Robin.

    If you reinstall it shouldn't change validation/authorization.

    ADE is a way to get approval involved; If she's not bad

    CTRL-SHIFT-D to ADE to remove the old authorization (cmd-shift-D for you on a Mac)

    Restart ADE

    reauthorize

    ~~~~~~~~~

    You can find the old version v1.7.2 better, much more reliable in many ways that ADE2.0 that is a load of bug riddled with garbage.

    Version 1.7.2, is a little hard to find, available on the website of Adobe for Windows and for Mac.

    http://helpx.Adobe.com/Digital-Editions/KB/cant-install-digital-editions.html

    The forum software is sometimes corrupt the link above.  It should not be a white in "editio ns.  What follows is a redirect to the same page: http://tinyurl.com/diged172

  • Extremely slow SD card

    Hi all! I'm having some problems currently with my Z5 Compact and SD card storage.

    I used to have a Sandisk Extreme 32 GB microSDHC card in my Z5C without problem for more than six months. About a month ago, I wanted to replace it with a Sandisk Ultra 64 GB adapters, and I have extreme with speed and battery problems whenever I try to use it.

    Some examples: when the camera app is set to store pictures and videos on the SD card, just start the camera application sometimes takes forever. The taking and recording of images is slow. In some cases, the animation of rotating savings appear for about 20 seconds, and finally the picture is still not stored on the card and lost. Spotify is unbearably slow when its storage location is set to the SD card. 5-10 second ago break almost whenever I go to a different track, during which the app will seem to freeze, there is no information on the course of the reading of the title, etc. Scroll to playlists often also freezes with all Flickr showing photos as "title unknown - unknown artist - unknown ', until it loads everything about 10 seconds later. I also get regular as messages "Track have available ', 'Go online to open the menu' or 'Storage not found', which all disappear after a few seconds, and once again, things are working. Two of these applications, camera and Spotify, work very well again as soon as I have them switch back to internal storage. They both work very well using the old SD card.

    The phone has become generally very slow, in some cases, it takes almost half a minute even unlock. He has also strongly affected battery life. A full charge is now usually empty inserted about 3 to 5 times faster without the SD card, probably because all the SD reading and writing takes a lot longer than expected.

    A cue point is a write speed supported about 12 MB/s for the card, which is still in the specification of a class 10 card. But I don't think that the sustained speed is the problem, it seems to be random file access. For example, one of the things I tried to take is clearing cache in Spotify, which reached about 10 GB in 3 000 files. Because the cache clearing in settings app seemed to freeze, I went to remove the folder in the file order. There, he showed that the removal of every single file took about 2-3 seconds until he would remove the following. If deleting hidden Facebook took more than 3 hours and nearly emptied a full battery charge. If I format the SD card, it seems fast for about half a day to a day, up to what the life of performance and battery life down again.

    At this point I don't know what the problem is. I have a few possible theories:

    • The SD that I may be defective, and could it works again if I just replaced?
    • Is the difference between Ultra/Extreme the problem? They both have the same speed, but extreme class are advertised as more quickly and about two times more expensive. My other Sandisk card, which was the extreme, worked fine, but I don't know if it's because of this. File access time is not advertised as a distinctive feature.
    • Is the shift from 32 GB to 64 GB (and thus SDHC to SDXC) question? That is, the Z5C there the speed problems with SDXC cards, and should I just replace the map with an equivalent model of 32 GB?
    • Should I go with a card from a different manufacturer? Is it not possible that that solved the problem?

    I was hoping that maybe someone here has an idea about their own experiences with SD cards, used in phones lines Z5, may have had the same problem at one point and present pointers on what is the possible cause.

    Thank you!

    Daniel

    Apparently, my card was not defective, but the Ultra line of SanDisk SD cards are simly not suitable for smartphones. I contacted customer support of SanDisk, and this was their response (translated by me, because the Exchange was in German):

  • Windows 7 goes extremely slow and freezing frequently

    I have HT a windows 7 operating system and it goes extremely slow and freezes frequently. You guys you will suggest what the problem in this case and how to resolve this kind of things? I want a little format. Thank you.

    Hi Nazaz,

    1. What is the number of brand and model of the computer?

    2. don't you make changes on the computer before this problem?

    I suggest to start the computer in safe mode and check if it helps.

    Method 1:

    Step 1:

    See the link to start in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

    Step 2:

    If the computer works fine in safe mode, I suggest you perform the clean boot.

    See the link to perform the clean boot.

    How to perform a clean boot in Windows
    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, see the section «How to reset the computer to start normally after a boot minimum troubleshooting»

    Method 2:

    Optimize Windows performance

    http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Additional information:

    8.1 Windows, Windows 8 or Windows 7 hangs or freezes

    http://support.Microsoft.com/kb/2681286/en-us

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    How to speed up your slow computer

    http://support.Microsoft.com/kb/2746761/en-us

    It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

  • CC 2014 extremely slow and unusable

    Here are my specs:

    Laptop PC under Win 8.1

    Intel Core i7 2 GHz

    8 GB RAM

    This computer is brand new, as in just bought today. Second application installed after a virus scanner was Dreamweaver CC 2014. I can't use it to save my life. When I'm in mode Code (the main view that I use), I can't scroll a page. The scroll bar moves up and down, but the code does not reflect the position of the cursor up to 30 seconds. I left the CC, disconnected my account app, turned off sync, exceptions added to my virus scanner in real-time for directories of DW... NOTHING works. It is a static HTML file that makes calls a couple of javascript CDN hosted files and nothing else. The file is located on site, not on a network drive. Even if that is what is unacceptable. CS6 got on my previous machine (same characteristics) and it ran like a dream. What is happening with this version?

    Hi Ryan,

    Thank you for taking the time to join for a remote session. We tested the issue on different hardware, tactile & could reproduce the problem with the key, but not with the mouse wheel.

    We have recorded a bug for this issue (3916384) & put in order of priority.

    You can re - confirm that the issue is also seen in scroll using a mouse?

    Thank you

    Delphine

  • "There is a problem with this Web page then it has been reloaded" in Safari on my Mac.

    When I go to Google Docs, the page may not load and the message "is a problem with this Web page then it was recharged" keep appearing until page reads "a problem several times occurred with xxx. It is also accompanied by a message saying "web content Safari quit unexpectedly. This problem occurred only when I try to access a document on google docs, and google no drive. It happens on multiple google accounts, so I guess that the problem is not in the account.

    I tried to remove the plug-ins, extensions, modules, clear my cache, erase my browser history and go on a guest account, start up and none of them worked. I have a macbook air.

    Does anyone know the solution to this? Thank you.

    Hi, it happened to me as well and made me mad, I've sorted this problem out by updating FontExplorer XPro (from version 2 to version 5.5), check your font app situation, if it is old, if you corrupt fonts etc.

    If you use font book, select the fonts and post them and if the problem persists then go to FILE) restore the Standard fonts.

    It seems that this is a problem caused by your application of policies or corrupt fonts, to give it a try.

    Good luck

    Gabriel

  • When I try to play a game online a page appears saying certifcate theres a problem with the security of websites and it will not connect to yahoo messenger

    Im trying to sign on a MSN chat game when I do a page appears saying that there is a problem with the security certificate from the Web site.

    It gives you three choices

    leave the Web site

    continue to this website (not recommended)

    more imformation

    When I click on continue he don't go to the game it won't let me play and a page comes up saying (open ports)

    also when I try to log in to yahoo Messenger, a message pops up saying

    We cannot connect to yahoo messenger

    then he gives me a choice of output or troubleshooting

    When I use troubleshooting, it is said that there could be a problem with your internet connection

    I have listed these two items because they were both working at the same time now their not.

    Any site, I try to get shows this message cerificate

    I did a scan on my computer and it says (fichier-\device\mfeavfk01.sys) (masked driver infection)

    so im collecting it is all related to the same problem

    Hello

    1. what browser you use to play games online?

    2. If you are using Internet explorer, version of Internet explore you use?

    Method 1:

    If you use Internet Explorer, I also suggest you to see link and check.

    "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

    http://support.Microsoft.com/kb/931850

    Method 2:

    How to reset Internet Explorer settings

    http://support.Microsoft.com/kb/923737

    WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    If you are facing any issue links to the yahoo Messenger, I suggest you to contact yahoo messenger support forums and check.

    http://help.Yahoo.com/communities/index?page=forums

  • Problems with the pages of models CS3

    My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

    I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

    The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

    If anyone has any idea how it happened, I'd appreciate comments so I do this again.

    If more information is needed, please let me know.

    Thank you

    Hi, Kelly.

    What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

    You work in a defined site? Yes, you are.

    The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

    You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

    Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

    Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

    Beth

  • Extremely slow in all directions. Typing, loading, handling and even just scroll to the top of the page to the bottom. Is getting worse. Frustrating Maddingly! Help!

    Firefox has been extremely slow. Typing, loading, search, even just scroll to the top of a page to the bottom. My daughter had the same thing happens to sound and had to get his computer disassembled and full recharged. I don't have this option. He doesn't have a virus and was completely free of anything that might slow it down.

    This has happened

    Each time Firefox opened

    Is a month ago. It is getting worse.

    Hmm... try to download the last version... but if it doesn't, then try Safe Mode. Do not know what could be causing it...

  • E2500: 'the connection to the 192.168.1.1 was interrupted." When you access the configuration page.

    Trying to access the configuration page, 'the connection to the 192.168.1.1 was interrupted."  I'm wired into the router.  Any idea of what is the cause?

    Ugh, I'm stupid... I was using the button in the back instead of the reset button on the bottom.  Thanks for the tip-off that the reset method should have worked.

  • I have reset my etec router and now I can not past the prompt 192.168.1.1. My pc is 8 years old and very, very slow

    I tried for two days now to restore my internet connection.

    I tried for two days now to restore my internet connection.

    192.168.1.1 is probably access your router's IP address and it could be a Linksys.

    If you reset your router, we help can'r you. You will need to access the router and configuring PPPoE username and password.

    Call your service provider.

    Why in the world would you reset your router if you didn't know how to put in place a new or know what to do then? It's like taking something apart and not knowing how to wind again.

  • Someone knows the extremely slow response and delay with "not responding" on more complex web pages after installing updates on Friday?

    Since the installation of 16 Nov received security patches I've known really slow response with Internet Explorer; 2 minutes between web pages on my WIN7 Pro PC and not much better on my VISTA Business PC.  I get expired on complex web pages the context comes up with "program addresses not" or the pop-up at the bottom of the screen asking me to do it again.  The problem is not limited to Internet Explorer, but also prevents Safari to come.   I tried to reinstall WIN7 Pro, but the problem remains.  I'm also not able to run You Tube or other videos.  There is no download or updated or running Belarc Advisor Windows installation problems.  While the problem occurs with Yahoo Mail, it is not an impact send/receive in Outlook.  Does not appear to impact, nothing other than browsing the web.

    Hi ephd,.

    Thanks for posting in Microsoft Communities. The problem description, I understand that the internet works slowly. Provide the following information:

    ·         Have updates you installed?

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check.

    Startup options (including safe mode)

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Internet Explorer is slow? 5 things to try

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    You can see these articles for more information:

    Why is my Internet connection so slow?

    Windows wireless and wired network connection problems

    I hope this helps. Let us know if you need more assistance.

    Thank you.

Maybe you are looking for

  • Problem IPOD Touch Kbps

    In recent weeks my Itunes and Ipod gave me royal fits. Finally, I worked on most of the questions, with the exception of one of the major problems. I have an Ipod Touch 4th generation running IOS 6 (the most recent who qualifies for 4th gen iPod.) I

  • exporting iMovie does not, after 9.3.1 update

    After I.O.S 9.3.1 update 2 days in my Ipad mini, I'm not able to export my projects to any mail mode, Youtube, etc. Export process get stopped half-way before completion, every time I try to do. I'm not able to export my projects.pl Advise.

  • How can I write a DVD blu - ray on a mac?

    How can I write a DVD blu - ray on a mac? I tried a blu - ray burner and (if necessary) the software to use. I found the BE14NU40, BD playback/BD write LG, but I don't know if it's Mac compatible. Can anyone advice a good burner + software?

  • my screen on the side. How can I get it back to normal?

    original title: my son did something on my screen, and now it's the display on the side. How can I get it back to normal? My son did something on my screen, and now it's the display on the side.  How can I get it back to normal?

  • Windows Easy Transfer does not

    I got a new computer WIndows 8. I want to transfer my data from my Windows 7 computer. Easy transfer works on windows 7 but not 8. When I pull up on the 8 I have the question Yes or no. Yes constituting the data is already on a drive hard and being t