F\ is not acessable due i\o device error

F\ drive is not acessiable due to the i\o device error

Hello

  • What version of Windows?
  • What is this disk F means? It is an external hard drive, Flash drive or the DVD drive?
  • Were you able to access the same drive?
  • Did you recent hardware or changes to the software to the computer before the show?

An I/o device error occurs when Windows XP or Vista, is not able to perform an operation of input/output (such as reading or copying the data) when it tries to access a drive or disk.

Causes of an i/o device error: I/O error problems could occur for one of the following reasons:

  • Windows tries to use a transfer mode that can not use the hardware device.
  • The device you are trying to access is damaged or defective.
  • Hardware drivers are damaged or incompatible.
  • There is a connection problem, such as a bad cable.
  • The disk CD or DVD that you are trying to access is damaged or dirty.

Try the steps mentioned below:

(a) restart your computer and then try to access the drive or disc again.

(b) if it is an external drive then wipe the drive and connect to the different port and then check.

(c) If you have another computer available, try to access the data on the drive or disc with the other PC to confirm that the drive or the drive is not damaged.

(d) If you do not have another computer available, try a different disk to ensure that the problem is with the computer and not with the original disc.

If the problem is resolved and you get is more the error message, the issue is resolved. If the problem persists, post your reply with more information.

It will be useful.

Tags: Windows

Similar Questions

  • I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

    I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

    You probably should have updated to 10.5.8 first.

    Installation or update of Snow Leopard:

    http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

  • VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

    The backup application could not start due to an internal error:
    Server execution failed (0 x 80080005)

    Vista Ultimate - trying to COMPLETE the backup of a computer

    Hi people,

    I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

    "The file or directory is corrupted and unreadable 0 x 80070570.

    I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

    I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

    After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

  • Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

    My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

    Hello

    Windows Defender is an antispyware software, not an Antivirus.

    If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

    There is nothing to worry.

    Using both programs at the same time can cause system conflicts, etc.

    If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

    "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

    Right click and select Properties , ensure that Startup Type is automatic.

    Once modified, click apply and OK.

    Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

    .

    And for now, change startup Vista programs without using Defender, use one of these methods:

    "How to use MSCONFIG in Windows Vista"

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    Or the program Autoruns for FREE:

    "V11.21 Autoruns for Windows"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And try this method for the analysis of Malware

    Scan of Malware in Safe Mode with network.

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Once in Safe Mode with network, download and run RKill.

    RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

    http://www.bleepingcomputer.com/download/rkill/

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    See you soon.

  • Chess Titans did not start is no 3d devices & error 1920. The service "Windows Font Cache" (FontCache) has no start.verify you have sufficient privileges

    Original title: titans of the game of chess,.

    Chess Titans did not start cannot find 3d... devices also office 2013 do not install (error 1920. The service "Windows Font Cache" (FontCache) has no start.verify you have sufficient privileges.
    I have the following in the Event Viewer error log

    Log name: Application
    Source: Application error
    Date: 14/07/2013-10:15:34
    Event ID: 1000
    Task category: (100)
    Level: error
    Keywords: Classic
    User: n/a
    Computer: darkpheonix-PC
    Description:
    Name of the failing application: chess.exe, version: 6.1.7600.16385, time stamp: 0x4a5bca09
    The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Offset: 0x000007fef9ca0004
    ID of the process failed: 0x1c24
    Start time of application vulnerabilities: 0x01ce804cf85d03a4
    The failing application path: C:\Program Files\Microsoft Games\chess\chess.exe
    Path of the failing module: unknown
    Report ID: 37e9d6e6-ec40-11e2-8c42-f0def1a3fe7e
    The event XML:
     
       
        1000
        2
        100
        0 x 80000000000000
       
        8266
        Application
        darkpheonix-PC
       
     
     
        Chess.exe
        6.1.7600.16385
        4a5bca09
        unknown
        0.0.0.0
        00000000
        c0000005
        000007fef9ca0004
        1 c 24
        01ce804cf85d03a4
        C:\Program Files\Microsoft Games\chess\chess.exe
        unknown
        37e9d6e6-ec40-11E2-8c42-f0def1a3fe7e
     

    Hi Sreevasthava

    I suggest you perform the upgrade in-Place on Windows 7, this would help you to solve the problem without losing any data or application.

    How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2.

    http://support.Microsoft.com/kb/2255099

    Note: before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

    I hope this helps.

  • Data are not acquired due to a VISA error!

    Hello, I had a something causing problem of ownership VI data acquisition. I have attached my VI in case you want to see my VI. When I tried to connect my VI assembled to the test, he didn't acquire data of it. The error has been shown "property Node (arg 1) visa set up a Serial Port (Instr) .vi-  It should not cause all ports or any computer systems because I already tested an another Sub vi (Data_read (adapted), you can find it in my sub package vi) with the bench test and it ran correctly. Any ideas?

    Thanks in advance


  • Updates to Windows not installed due to an unknown error

    I always keep my computer up to date, but recently Windows Update encounter problems which mean that updates do not install. 57F error code happens which means that it has encountered an unknown error.
    It began on 14 April, when I installed a number of updates which it has not accepted, KB959995, the most recent is today with the KB969376 update. I tried several times.
    I have Vista home premium installed and had no problems with it. I had IE 8 is installed since the beta came out and have been regularly check the updates.
    If anyone has any suggestions I'd be grateful.

    Hello Rah1234,

    This is the first link again

    http://support.Microsoft.com/kb/838687

    The second update failed (KB969376) is the Outlook 2003 Junk e-mail Filter update. I suggest you MANUALLY download and installation of this update using this link

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=EAFF62BC-7A50-4597-8905-CBBF0B61EA47&displaylang=en#requirements

    If please reply and let us know if your problem is resolved or if you need further assistance.

    David O
    Microsoft Answers Support Engineer
    Visit our and tell us what you think.

  • «The backup application could not start due to an internal error: the specified service does not exist as an installed service.» (0 x 80070427)

    When you try to make a backup of wuch as "Create a system image" in Windows 7 Professional, I get an error. Windows Backup Service is on the list and he is even started.
    I have searched this forum and the internet and have not found a definitive resolution to this matter. This is a freshly installed Windows 7, and I have tried a clean boot and still get the same issue. I did a sfc/scannow and integrity is very well. I have Norton Internet securities 2010 and have not found any malware or a virus on my system. I really don't want to activate my Windows 7 support for a question that should work installed right out of the box of backup. I reinstalled not even one of my games or anything which could change windows somehow.

    Have the same Prob as Mezroc with Win7 Pro (64-bit). Maybe it's a coincidence but the problem started after a failed at startup Defragment using 9 System Mechanic!

    Looked at VSS, start, set it to auto, made no difference.

    Its now 2 days later and decided to restore System Mechanic registry change and now find the Back up and restore works again!

  • Could not find the SRS audio device error

    Since I installed Windows7 on my laptop, I got the error "Unable to find compatible SRS audio device" on start up. I checked the "Device Manager" and all audio devices seem to work normally. I have re-installed Windows7 and I still have the same problem. When I play music, I get static on my speakers. When I use a trial subscription to a SRS audio product for purchase, the problem goes away. I want to fix this problem without having to pay for one of the products of the SRS.

    Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

    Resources:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  • Catalog does not open due to the "unexpected error".

    Although I installed Windows 10 weeks there, I used LR 5 several times since.  Now I get the unexpected error message.  I have 3 other catalogs, although I am not encouraged by the fact that they have dates of 01/05/2015, 12/01/2015 and 27/11/2014, none of them is open for the same reason.  Integrity tests the result in the same error.  I tried not to create a new catalog.  I would like to make a return to the top of this catalog as it was before today and the one before that.  What my next move here?  I have

    I could open a supported catalogue on an external drive.  By trial and error, I got another error message, but this time it said I didn't have administrator rights in the file I was trying to save in.  Should occur during the recent migration of Windows 10.  I got the necessary permissions and so far seems to work very well.  But thanks for your interest!

  • Premiere Pro does not open due to the license error in App Manager

    Stuck in a loop trying to open PP.  I am a CC members since the beginning, never had this problem.  The country on the normal use of my Mac and the same connection I did for at least a year.  This is what happens...

    I talked through problem with the 24/7 chat that me question could go up and take 2 or 3 DAYS to be contacted for assistance.

    I tried...

    A disconnection CC app then try above.  No solution.

    Relocation of the AAM and try more. No solution.

    PPCC then re - download and try during uninstall. No solution.

    HELP PLEASE!

    Please refer to renew your subscription error

  • Impossible to continue due to a hardware error or system. Sorry, but this error is unrecoverable

    Photoshop cs3 has stopped working. Download error - could not continue due to a hardware error or system. Sorry, but the error is unrecoverable. RELOADED software - but not resolved. Any advice? Someone mentioned the files settings or profiles?

    Yes, a reinstall will not affect the preferences file.

    To reset the preferences click to run Photoshop and IMMEDIATELY hold down the CTRL, alt + shift keys.  It's a little tricky to keep trying until you get a window to reset.

  • Save the 0x8078002A error code. The request could not be performed due to the i/o device error (0x8007045D).

    I tried to backup my C folder on a hard disk extrenal and received the following message:


    OT: Backup failed Windows7 0x8078002A error Code.
    Quote
    One of the files of backup could not be created (0x8078002A). The request could not be performed due to the i/o device error (0x8007045D).
    End of quote
    Can someone advise me?
    Nitin

    Hello

    Method 1
    Check the shadow copy Volume service in the services window. Use the following steps to check:

    a. Click Start and type services.msc in the search box

    b. Locate the Volume Shadow Copy service

    Make sure that the startup type is automatic. Steps to set the auto services

    a. Locate the service

    b. right-click on the service

    c. If the service is stopped and then starts the service

    d. Select Properties

    e. and in startup type, select automatic

    Method 2
    Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error":http://support.microsoft.com/kb/952272 (for Windows 7)

    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  • CD DVD WILL NOT READ OR WRITE. D: IS NOT ACCESSIBLE DUE TO THE I/O DEVICE ERROR

    Toshiba Satellite A - 105 Windows XP media center management with a MashitaDVD/RAM UJ - 841S drive will not read or write CDs D States is not accessible. Cannot be performed because of an i/o device error. However, I can play movie CD via the media center.

    Does anyone have a solution? Thank you!

    Hello

    ·        Was there no hardware or software changes the system just before this problem?

    Please try to follow link below to solve the problem with the DVD player:

    http://support.Microsoft.com/kb/891894

     

    Note: After a repair in method 2 in the link above, make sure you put the computer to start as usual as shown in method 2 in the above article.

    Hope this information helps you solve the problem. Let us know if it helps.

    Thank you and best regards,

    Ramata Thakur

    Microsoft technical support engineer.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Equium A60-191: 'request could not be performed because of an i/o device error. "

    I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
    It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

    I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

    I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

    1. click on start
    2. right click on my computer
    3. Select manage from the menu that appears
    4. in the computer management window, select Device Manager
    5. in the right pane, click to expand IDE ATA/ATAPI controllers
    6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
    7. Select Properties
    8. in the Properties window, click the Advanced Settings tab
    9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
    10. click OK and exit all windows.

    If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

    Device 0: Primary IDE Channel
    Unit 1: Secondary IDE Channel

    Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

Maybe you are looking for