Similar Questions

• Firefox hangs and I don't know where to find "subject: breaks down.

  In recent weeks, Firefox started to plant several times and quit unexpectedly - especially when I click to open it. I often get the annoying message "well, this is embarrassing." More useless. I sent the report of the accident and expect to hear from you as to why I have problems, but nothing happens. I can't find how to locate the ' topic: breaks down ' in the address bar. Can you explain this.

  On a Mac, it's Cmd + L to go to the address bar.

  If you have submitted incident Breakpad reports then it would help if you post the ID of one or more reports of incidents Breakpad.
  You can find the ID of the submitted crash reports on the Subject: hangs page.
  You can open the Subject: hangs page through the address bar just like you open a Web site (topic: is a protocol for accessing the internal pages).
  A GUID crash looks like: bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx

  You can copy and paste the links or the crash IDs of some of the most recent accidents, and post them on this forum.

• H Satelite L755-13 - the speakers shut downs every few minutes

  I have experience with speaker problem. I have installed new drivers, even reinstalled new win7 64 bit.
  However, speakers shut downs every few minutes. If I start to use earphones instead speakers back in work.

  Please, help to solve this problem.

  How to understand this issue?
  You start your laptop and this computer you do exactly? What happens exactly?
  Is everything OK with headphones?

• How can I make sure that my music on my Ipod Classic is not lost forever, if it breaks down?

  How can I make sure that my library of music on my Ipod Classic is not lost forever, if it breaks down?

  Back it up.

  Your music library should never exist only on your iPod.  It must be present on a computer in iTunes, and to be sure it must be saved on an external drive also.

  If your library no longer exists on your computer for whatever, reason, you need to extract the iPod.

  turingtest2 offers you several ways to do this in his user tip found here:

  Recover your iTunes from your iPod or an iOS device

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• If my computer breaks down how am I supposed to get my files that are saved back.

  If my computer breaks down how am I supposed to get my files that are saved back.

  Barjakes

  What operating system are you currently using?
  If you use Windows 7 try from here.
  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

• After clean reinstall XP 2, IE6 continues to break down, Windows Update does not work, so I am unable to download 3 XP and IE8!

  Need help to diagnose why, after a clean reinstall of original CD XP2, IE6 continues to break down, and Windows Update is not working correctly,

  which means that I am unable to download XP 3 service pack or IE8.

  Download sp3 from HERE. Save the file to your desktop. Double-click the file to install sp3 manually.

  Edit: Link fixed.

• I'm typing. You need to hold down every 2-3 seconds.

  Original title: I'm typing. You need to hold down every 2-3 seconds. That's happened? also running slow and jumpy. Too hard to type!

  message is in the title

  Donation thank you for your response.  Yesterday, I turned off the laptop and disconnected everything. When I turned it back on, a black screen came up with the message on the computer that is running a check. I let it do its thing, lasted only 1 minute, and when I've logged on to hotmail and has begun to respond to an email, the keyboard worked really well and even faster than before! I guess that it just fixed itself, thank God my fingers became really painful immobilizes the keys for so long at a time. Thank you all for your suggestions, Jeannie Grama

• Explorer.exe (I think) breaks down regularly

  Hello

  First, I will begin by saying that I am not entirely sure of the weather or not this is the right category. So, I want to apologize if it is not.

  My problem is that explorer.exe (or at least I think it's explorer.exe) breaks down regularly. It happens when I am opening the files, making things with files (such as copy, rename, Zipper,...), or simply at random intervals. Then the image of the desktop background and the icons on the desktop disappear, leaving me with a purple background. The same happens for all the icons and the clock in the taskbar.

  Usually, it recovers after a few seconds, open records in the process of closing. When it isn't, it can be retrieved manually by running explorer.exe in Task Manager (this is why I suspect task manager).

  Sometimes it seems to get into a loop of crash, constantly crashing, recovering a few seconds later and then crashing again. This can be stopped by killink 'Windows verkenner' task, or translated: 'Windows Explorer' in the Task Manager. From, it still often causes only to crash again then, so then I have to use the cmd to do what I would normally be in the Solution Explorer, or restart my computer hoping that it will work next time.

  While this problem is not very harmful to my computer (or so I think), it's getting very annoying, especially since it ig going more frequently over time.

  I have already disabled the windows updates, because the problem always seems to worsen after updates.

  He has especially much worse after upgrade my computer to windows 8.1 (which was already earlier). He never continued to work for a minute then, and I did a system recovery to restore windows 8.0.

  I had this problem basically since I've had this laptop (which was in September), but I have not found a solution for this. I've done various analyses of viruses and malware, and I'm sure that it is not caused by a virus.

  If anyone knows a fix work for this, so I'd be very happy.

  Thanks in advance.

  ~ Ben

  If Windows 8 comes with the laptop, then you must take the issue by the manufacturer of the laptop.

  There may be a policy for downgrading to Windows 7.

  What you are experiencing with Windows 8 is not typical and I would recommend to take up the issue with the manufacturer of the laptop because it's their responsibility, under warranty, to make sure everything is working properly, including the software.

• Premiere Pro CS6 (OSX 10.10.4) breaks down repeatedly

  After upgrading to OSX 10.10.4 my CS6 Pro first breaks down during editing or rendering video clips.

  You don't understand that CS6 going on 4 years and that it was not designed for the latest Mac OS?

  Below has been all previous MacOS, but now it seems that 10.10.4 cause MORE problems

  - and a possible (at least for Premiere Pro) difficulty https://forums.adobe.com/thread/1891705

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

• In version10.1.5 how I would break down a large PDF file and then save each page which is the biggest file?

  In version10.1.5 how I would break down a large PDF file and then save each page which is the biggest file?

  If you mean Adobe Reader 10.1.5 (you tell what you have) then you can't. This would require the full version of Acrobat.

• Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the old dr

  I asked a question here before and got a response, so I'm back. Yet Cs4 breaks down I'm starting a new project and gives me an error message [..-.. \sre\AME Prober.cpp - 258 preset] I chose nvidia 880 M graphics card and I tried to go to the older driver

  I couldn't on the forum last night! And today too busy...

  I think that a reinstallation is the only solution for the preset errors prober TEA that has been reported. Activation etc problems can be problems, if you have a subscription to the CC, try all the options to sign out/in on the cloud first Office.

• What happens if my external drive "working files" breaks down?

  I use two external drives to save and back up my files.  The files organized, edited the reader of 'work'.  If the drive working breaks down, how can I restore it from the player of "backup" that contains just the original, unmodified, the files placed in folders by date of importation?  I realize that catalogue contains all the changes, but how to return to the Organization?  Anyone using a Raid 1 configuration for two disks mirrored?

  Maybe I don't make myself clear. How to take the 'back-up' disc, containing original photos not published, ordered by date of import and convert the disc format 'work' catalogue in the LR4 will recognize?

  It's great that you think about it now, instead of this disaster.  Play well!

  The "second copy" option in the dialog box import is ideal for temporary backup, while the pictures in your main backup system, but it is a nightmare to restore from.  There are options to rearrange disaster, but it is better to avoid.

  Rather than RAID1, I would suggest looking at backup synchronization software or a file - I love Vice Versa on Windows or Chronosync on Mac - to keep a copy in the mirror of the work unit.  If you use RAID1 and photo gets deleted or damaged, it is immediately deleted/damaged on the second disk RAID, while the file backup/synchronization software would go less often, giving you a chance to recover it.  Many also offer one option 'archive' for deleted photos, moving them to another folder.

• I try to print Photoshop 13.0.1 breaks down. When you access the print dialog box - every time.

  Maybe the wrong default printer causes this but are not about to change... Any ideas? Summer save files in PDF format for printing, thought of reinstalling the program to fix this annouance...

  Thank you.

  Saami. Helsinki, FINLAND

  Try to reset the preferences:

  Windows: CTRL-SHIFT-ALT immediately after you double-click the PS icon.

  Macintosh - CMD-SHIFT-OPTION immediately after you double-click the PS icon.

• How to break down / avoid massive pop up menu

  I'm creating a monthly budget worksheet that will condense my daily expenses in a summer table.

  I am trying to find a way to avoid a very high pop-up menu with my detailed categories.

  I have read and tried nested popup menu message (Nested (or waterfall) of the context Menus in 3 numbers), but to the best of my knowledge because of the filter running only through the column, the result dependent only "view" in the line below. I'm trying to make it display in the next column.

  It's my big list of categories

  Housing	Transport	Insurance	Loans	Food	Entertainment	Personal care V	Personal care S
  Rent or mortgage	Fuel	Home	Student	Grocery	Cinema	V Medical	Medical S
  Electricity	Insurance	Health	Credit card	Eat at the restaurant	Concerts of	Gym Room V	S gym
  Gas	RAA	Life	Credit card	Other food	Theatre	Mobile phone V	Mobile phone S
  Water	Maintenance	Other insurance	Credit card		Sports events	V clothing	Clothing S
  Internet	Taxi		Credit card		Other shows	V dry cleaning	S dry cleaning
  Phone	Public transit		Other loans			V hair/nails	S hair/nails
  Maintenance and repairs	Other transport					Other v	Other S
  Other accommodation

  I tried to use nested popup menu work around to have a sound to the top of the list of topics in bold and then showing the subcategory in the next column

  Like this

  Date	Description	Category	Subcategory	Unit cost	Quantity	Total
  Friday, July 1, 2016	The alcove Café	Food	Eat at the restaurant	$ 24.80	1	$ 24.80
  Friday, July 1, 2016	Essence	Transport	Fuel	TO THE $60,51	1	TO THE $60,51
  Sunday, July 3, 2016	Milk	Food	Grocery	THE $ 2.50	1	THE $ 2.50
  Monday, July 4, 2016	RAA	Transport	RAA	$ 97.00	1	$ 97.00

  When I followed the instructions, I have only the subcategory showing instead in the following line:

  Food	Show
  Grocery	Show

  Is there a possible solution?

  Popular ideas.

  Hi-n-S

  Way, as pop-ups nested depends on hiding those which do not apply, and c only columns to be hidden "manually". You can keep everything on one line, only using a pop-up and the slider defined, though.

  Here's an example, using your table of categories as a lookup table.

  

  Is your Budget table with a column extra (E) holding a set of Stepper with values set to 1-8 in 1 increments. You can also try using a slider instead of a stepper motor here.

  Column C contains a drop-down menu with the items listed in the 1st row of the table of categories as menu items. The menu is set to start with Blank to allow the State indicated in C10.

  Column D contains the following formula, entered in D2 and filled until the end of the column:

  D2: = IF (C = '', '', INDEX (categories: $A:$H,E+1,MATCH(C,Categories::$1:$1,0)))))

  The IF part at the beginning (IF (C = "","",) check an entry in the categories (C) column, if C is empty, then the formul leaves the empty column D thus in cell.)

  If there is an entry in the cell in the row "this" in column C, the result of the IF test is FALSE and IF passes control to the INDEX.

  GAME reads the value of this line of the C column, looks for this value in the first row of categories and returns the number indicating the position in the list (for example, 3 for the 'insurance').

  Index uses "the value of this line of E" + 1 and the value returned by the MATCH to determine the row and column of the cell range, it is reading (categories: $A:$ H) to obtain the return value to the formula (and the cell that is the formula).

  Precautions: I had originally the Stepper in column D and subcategory in column E, Stepper cells results present the control attached to the right edge of the cell when selected, obscure partially the cell to the right of the stepper (where, with this arrangement, the result was posted). Center the text in column E was enough to make the subcategory identifiable when partially obscured and can be more convenient than the foregoing.

  The current arrangement, with the (Stepper) control to the right of the column of the results leaves a visible result while defining the Stairmaster, but introduced more strongly the temptation to enter the subcategory directly from the keyboard, by replacing the formula for this cell.

  If you do not change the positions of the two columns, you can do without having to rewrite the formulas. Select the subcategory column by clicking its column Reference tab (currently "D") above the table. With the selected column, click New, just to the left of the letter in the reference tab and drag to the right until the column Stepper jumps to the left. Remove the column moved in the space opened by the move.

  Kind regards

  Barry