F10: is it possible to install the latest driver of page F20?

Similar Questions

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Impossible to install the latest driver for Intel 82852/82855 GM/GME (SP A40)

  I know that this topic is explained before by NickyNoogle and Juan28, however I need more help.
  I can't install the latest driver for the graphics controller Intel 82852/82855 GM/GME (Toshiba A40 Satellite Pro). I downloaded the driver from the Intel Web site, but it has not installed and there is an error message "unable to install on this computer, please contact with the producer. I need to update the driver of 6.13.10.3514 version of lates version (6.14.10.4421). I know that I have to use the Toshiba drivers only. Could you be so kind and stick it to the post any link of this driver to download? I can't seem to find it on the Toshiba site anywhere.

  Hello

  You can not install it because of the material. AFAIK designed Toshiba drivers are slightly modified to be limited and protect the graphics card. Driver Intel can get the map on the maximum limit and destroy it. This is the reason why you can not install it.

  Sorry but there is nothing to do. Try to check if a new Toshiba unit has the same graphics card and latest driver on Toshiba download page. Date of arrival:
  Sat Pro L10
  Satellite L10
  Satellite A50 and A80 (6.14.10.3943)

  Good bye

• Impossible to install the latest driver Intel Display

  I am trying to install the latest driver from Intel HD graphics card, but I always get the message that my system does not meet the minimum requirements...

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS032433#systems

  I have a T430s.

  Here's a screenshot of my dxdiag:

  

  
  

• Can not install the latest driver from Intel on my Satellite Pro U300-10 display

  Hello

  Intel has recently, a new display driver, which I think is useful to me because it won't let me play games that require:
  Pixel Shader PS1.1
  Vertex Shader VS 1.0
  "Act of war" and others.

  The pilot is the revision of the pilot: 15.12.4.1666, March 5, 2009
  It is supossed to be the latest driver for the video card U300: MOBILE INTEL 965 Express chipset family.

  The problem is that when I try to install, I have an error that says: "not for this system, ask your provider manufacturer.

  How can I install or where I could find the solution?

  I have TOSHIBA Satellite Pro U300-10 with Windows Vista Business 32.
  MOBILE INTEL 965 Express chipset family
  MOBILE INTEL GMA X 3100

  Thank you much in advance.

  DCARL

  Drivers designed for laptops are changed and adapted to provide performance fairly, but not to force a graphics card to run on the limit. As you probably know there are big difference between office and mobile graphics cards.

  Desktop graphics cards have no limits with cooling and drivers can be updated very often. Design of portable computers is completely different and all hardware components are placed on the square. The common problem with laptops is to design the system of cooling, small but effective.
  Because of all these reasons, display drivers must be tested and adapted by the laptop manufacturers. The main point is to protect the material. The same situation is with other manufacturers of graphics card. They don't offer drivers for laptops.

  If your graphics card will blow that will be responsible for this Toshiba or Intel?

  By the way: Satellite Pro U300 is for me a laptop of small business and certainly not designed for games. Do you agree with me?

• Satellite A50-109: cannot install the latest driver for card ghraphic

  Hello

  When I want to install the new driver for graphic card on my satellite A50-109 and error will be displayed:
  THIS DRIVER CANNOT INSTALL ON THIS COMPUTER,
  Please help me
  my graphics card: Intel 82852/82855 GM/graphics controller GME

  Please help me

  Hi Milad,
  Did you get the new driver from the web site of Toshiba or others.

  The graphics card in your laptop is not necessarily compatible with the latest drivers from the manufacturer, simply because it is specially designed for your laptop. Usually only the drivers supplied by Toshiba works correctly.

  HTH

• Wi - Fi Elitepad 900 died after you have installed the latest driver Atheros HP.

  The Wi - Fi on my 900 Elitepad (Win 8, 32-bit) works well in the past.  But recently, I am constantly Wi - Fi 'limited connection' and that 'no connection' emits intermittently.

  And I went to the download page of the HP driver, installed the last "Qualcomm AR6000 Driver Atheros Wireless LSN series" (SP61232, ver.3.7 of March 22).  After installation, the Wi - Fi connection goes dead.

  In the lower status bar, the Wi - Fi icon is always displayed with a red & white and does mean 'no networks detected'.

  In the section 'wireless devices' menu 'Settings of PC' Win 8, the Wi - Fi button disappeared altogther, even if she was still there before the update of the driver.

  In the "Network connections" window of Win 8, the Wi - Fi icon is displayed as 'active', but a better connection returns the message that "there could be a problem with the driver for the wireless adapter.

  In the "Device Manager", the Qualcomm Atheros AR6004 adapter shows that everything is normal and work, even if it is obviously not.

  For the 'ipconfig/all', the Wi - Fi section does not even appear in the result.

  I've uninstalled and reinstalled the old and new Wi - Fi drivers several times above, but Wi - Fi is still dead.

  Help, please.

  Problem solved!

  I had to uninstall all the drivers Atheros Wi - Fi in the Mode without failure Windows, restart, then CNettoyez in the normal Windows mode, restart, and then finally reinstall the latest driver in Mode Windows safe.

  Now the Wi - Fi is back running.  But I have to check if the Wi - Fi BOUNCING 'limited connection' or 'no connection' not coming back or not, with this latest HP driver.

  It must be one or more of the following applications installed that prevented the WiFi driver install correctly in the first place:

  The AVG antivirus,

  ZoneAlarm firewall,

  CNettoyez,

  Malwarbytes anti-malware.

• Error: "Win32 dll' after that I installed the latest driver from nvidia.

  My specs:

  -Windows Vista Edition Home Premium 64-bit

  -4 GB of ram

  -Core 2 Duo E8400

  -Geforce 260GTX

  I installed and activated my Windows Vista with service pack 2. I downloaded and installed all the latest drivers of my motherboard website.

  Problem: I downloaded the latest driver for my graphics card nvidia and once that I reboot my windows displays the error message saying "win32 dll" does not work and my background task bar is full of this message. Also, my pc is very slow. I somehow get to "system restore point" restore back to another restore point.

  Once my pc over to restore to a different point, my pc works fine. So I installed an old version of my graphics driver and it worked fine. Restart and distillers works very well.

  Question; What is the problem with my pc? What is my graphic card, driver, something that I didn't do, and how can I solve the problem?

  Thank you for your help

  Hi tsunomi.

  Have you had a chance to do a startup repair?

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.

• Driver is not intended for this platform (install the latest driver for Verizon Wireless WAN (UNDP))

  Hello

  My Verizon Wireless WAN has worked on my T500 (2081CT 0, 4 GB of RAM, Windows Vista Business 64) since I received it last September. This morning it stopped working. Said that the card has not been activated. Ask Verizon and Lenovo have been pretty useless - each blamed the other, I so put on my own.

  -I uninstalled the driver for the Qualcomm HS USB card integrated, downloaded the latest version of the driver (transferred via CDROM since I can't connect to this laptop to the network where I work) and tried to install it. The HS-USB card is now displayed in the devices as "Unknown device" Manager (under 'other devices'), and his device status is:

  "The drivers for this device are not installed. (Code 28)

  Driver is not intended for this platform.

  To reinstall the drivers for this device, click on reinstall the driver. »

  Huh?

  Of course, reinstall driver does not work, the first problem is that he can't find online because I don't have internet connection without the card.  This driver has been installed from the following link:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-69999

  Seems to me that it should work on this machine. What I am doing wrong?

  -Some additional background: I've had several accidents recently, including at least two yesterday with blue screens. Easy to believe something has become corrupted, that's why I tried to uninstall and reinstall the driver.

  Help!

  Thank you very much.

  Solution was to uninstall the 'unknown device', search for new hardware and follow the promts by selecting all default values.

• Why do I get a message "driver conflict detected" after you have installed the latest driver.

  I got the impression ink levels display problems.  So, I decided to run the latest software to print and Scan doctor.  Of course, diagnostic tests detected a driver problem and displays a message "Driver conflict detected.  So, following the instructions, the driver has been uninstalled and new software has been installed by using the latest version of the driver full and another software installation.  After this has been done, diagnostic tests was performed again, guess what, same message.  The next timeI just installed the driver installation package.  The diagnosis was made again.  Guess what, same error.  Well, after a few hours trying to find another driver for a 64-bit computer to Windows 7 and looking for an uninstall program different, I gave up.  Oh, the other problem is repeated 'offline' messages on my wife, WIFI connection to the printer. No problem has been fixed.   Does anyone have a solution?

  Thank you-

  That solved the problem for the USB connected computer. The wireless computer works correctly.

  Thank you very much for the help.

• Can not install the latest driver from NVIDIA on my Satellite A100 - 999 (PSAARE)

  Hello

  I have a problem with the nvidia geforce go 7300 card controllers in my laptop, there is an update of the website of toshiba for this laptop and version 156.16, one coming from him makes it so that is 97,46

  When you install the new controller, this leaves me the following message: the program from nvidia cannot locate any controller compatible with current hardware.

  Not you if it's better to remove the old controller to accept it or the problem is due to something else.

  Can someone help me

  Thank you

  Post edited by: [email protected]_ES

  Hello

  Did you remove the old driver first? Try to manually remove and install a new one after the reboot.

• Need to install the latest driver for Huawei EM680 w / Gobi technology

  but could not find the driver

  Hi Ikklc8888! You have a problem with your Sony product? Please provide details. Thank you.

• How do I install the audio driver on a presario sr1907cl

  I'm having a hell of a time trying to install the audio driver on a compaq presario sr1907cl. When I try to install sp26731, it says that I need to install the Audio UAA bus driver from Microsoft, then when I tried to install it, I got a window that says my os is more recent than the driver. Looks like I'm just spinning my wheels. Don't know what to do to have the sound on this thing. Any help would be greatly appreciated. I have never seen something like that just to install a sound driver, but I don't know that what has happened to many others.

  Thank you very much,

  [email protected]

  Hello:

  You need to install the latest driver for chipset nForce XP for your model first and probably restart.

  http://www.nvidia.com/download/driverResults.aspx/9701/en-us

  Then see if the last driver Realtek works.

  If you have installed XP SP3, you shouldn't need the msuaa driver.

  Accept the agreement, download and install the element 4th on the list (first in green).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• System crash when I install the bluetooth driver in windows 8.1

  HP Pavilion 15-e034tx

  When I install bluetooth driver in system failure windows 8.1 with this error "unhandled Thread Exception system.

  Bluetooth hardware ID: PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00

  Sir where is Bluetooth for Windows 8.1 driver?

  can someone help me please?

  Hello everyone I found the solution to this problem of Bluetooth. First of all, I want to share the essue of Blutooth hand in windows 8.1.

  History is actually a bit interesting: Microsoft has fixed a bug in the rollup of November which exposed a bug previously hidden in Bluetooth drivers for Ralink/Mediatek, resulting in all the world with a fully-updated Windows 8.1 and Ralink bluetooth (very common in low price/low-end systems) to BSoD unless the bumps users to a system restore point before updates of November. So yes, there are sometimes dangers for fixing bugs.

  Basic requirements:

  1. all drivers for HP laptop, BIOS and windows 8.1 implemented to date with the latest updates.
  

  File Requirements:

  1 8.1 Windows file update kb2917488 - x 64 (download link)

  http://www.4shared.com/RAR/CP-Ov9Hv/blutooth_update_fix.html

  2. Ralink software Bluetooth driver (windows 8 or 8.1 Windows)

  Basic steps:

  First check windows update, download and install any updates. Also download and install the latest driver for windows 8.1

  Download file update 8.1 for Windows kb2917488 - x 64 in 4shared link. (File name: Bluetooth fix)

  kb2917488 - x 64 Windows 8.1 updated in.cab(cabinet file) If you need to know how to install the .cab file installation.

  The .cab file installation steps

  Open the administrator command prompt and run the following command to install and integrate the Archives of Cabinet:

  Pkgmgr/ip/m:.cab / quiet

  Or,

  start/wait pkgmgr/ip/m:.cab / quiet

  Replace with the path (location) for the file .cab and with the file name of the cab without parentheses. If the CAB file is in the current directory (same directory where the command is executed, the path can be ignored.

  Example: pkgmgr /ip /m:C:\Users\User update fix\windows8.1-kb2917488-x64_43f3b89601d407a00cbf87297ab1ddb0ba1c4619.cab/quiet

  (If you do not understand the method of installing the .cab file search for it on google)

  This command silently install the Windows kb2917488 8.1 update file - x 64 in your system... complete installing the automatic system successfully reboots (wait automatic reboot)

  Now you can install your old windows 8 Ralink Driver Bluetooth software or update the latest driver with HP Support Assistant in windows 8.1.

  (Note: install all the drivers to run as Administration) (Sorry for the bad English)