F11 Recovery not working - error Windows could not start

Similar Questions

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• Message error "Windows could not start the Windows Firewall on the Local computer.

  I was check the status of the Windows Firewall and I got a message saying "update your firewall settings" and "use recommended settings" option. However, when I click on this option, my cursor is occupied for a while, but nothing happens then.

  I tried from Windows Firewall in the list of Services, and I got this error: ' Windows has no start Windows Firewall on the Local computer. " For more information, see the system event log. If he is a non-Microsoft service, contact the service vendor and refer to service 13-specific error code. »

  I also tried to fix problems using Windows Fix - It, but these two problems were still attached. Help, please.

  Thank you.

  If you have a malware infection in not too distant past, this could be a relic.

  First, run Disk Cleanup to rid the system of temporary Internet files. These can seriously slow down a Malwarebytes scan.

  Then run Malwarebytes.

  http://www.Malwarebytes.org/

  Time of installation, make sure that you do not check the box to install the trial PRO version...

  How to use Malwarebytes

  http://www.bleepingcomputer.com/virus-removal/how-to-use-Malwarebytes-anti-malware-tutorial

  Follow-up to the ADW cleaner...

  http://www.bleepingcomputer.com/download/adwcleaner/

  Do NOT click on the GREEN download button because it will bring only sadness. Use the right BLUE button below.

  When you are satisfied that there is nothing wrong in the system, re-run Windows patches...

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• Impossible to update error Windows could not search for new updates code: 8024A 000

  Original title: Windows does not run updates, error 8024A 000

  When I try to launch updated, I get the error msg could not windows search updates 8024A 000?

  Hello

  Method 1:

  I suggest you to reset the Windows Update components manually by following the steps in the section Let me fixit myself .

  Warning: the section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

  Method 2: Analysis of SFC (System File Checker)

  SFC scan will find all missing or incorrect system files and repairs them.

  See the following site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.microsoft.com/kb/929833.

   

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• ERROR: Windows could implement < name > (ad hoc)... error saying '"windows could not configure wifi'

  I'm not able to create an ad-hoc in my dell windows 7.

  He demonstrated an error saying "'windows could not configure wifi', where wifi is the name of my adhoc network."
  Kindly help.

  Hey Monty,

  What version of Windows 7 are you running?

  Go in Start > run and type winver to know. You must run Windows 7 Home Premium or higher in order to create an ad hoc network. Windows 7 Starter Edition cannot act as a server/host adhoc.

  I suggest you try the steps from the following link on how to create the ad hoc network.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-computer-to-computer-ad-hoc-network
  Also check out the link:

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

  Keep us updated with the result once you try the steps above.

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• Unable to repair the connection of local error: Windows could not finish repairing the problem because the following action could not be completed

  Original title: Repair the connection to the local network.

  When I try to repair the connection to the local network I get the following message: "Windows could not finish repairing the problem because the following action could not be completed: clear the cache DNS."  For assistance, contact the person who manages your network. "How can I solve this problem?

  Hello

  1. what exactly is the problem you are experiencing when connecting with Internet?

  2. what type of Internet connection you have (wired or wireless) sound?

  3. don't you make changes to the computer until the problem occurred?

  Method 1: To resolve this issue, follow these steps:

  (a) click Start, click run, type services.msc, and then click OK.

  (b) in the list of services, click DNS Client.

  (c) ensure that the status column displays started and that the Startup Type Automaticcolumn.

  (d) if the service is not set to started or if the startup type for the DNS Client service is not set to Automatic, follow these steps:

  a. right click on Client DNS and then click Properties.

  b. in the Properties of the Client DNS dialog box, click the general tab and then click Automatic in the list Startup type .

  c. click Start, click applyand then click OK.

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Hope this information is useful.

• "" Switch USB SanDisk Cruzer 4 GB not format error "Windows could not format.

  Original title: Switch USB SanDisk Cruzer 4 GB will not format...

  Whenever I try to format it, it says "Windows could not format.

  According to the ability that she reads, 64 MB.
  File system: FAT (default)
  Allocation unit size: 1024 bytes
  Oh and I have Windows Vista. I have another flash drive even space and everything and it did not happen to her. All reviews are useful.

  Hello

  Try to format it in Windows Disk Manager.

  See the following steps:

  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the Navigation pane, click Disk Management.

  c. right click on the partition or drive that you want to format and then click on format.

• Error: Windows could not find the username, when residential group folder sharing.

  Original title: Windows could not find the user name

  I use Window 7 Ultimate and have set up a homegroup. In Windows Explorer, I select a folder and choose share with. I have in the file sharing dialog box, select a user name (I checked that it is a valid user), and then click Add. I get the message "Windows could not find . I can't find a reference anywhere on the web for this problem. I'm the first one to see it?

  Hi David,

  For any question of shared folders in the homegroup, run the resolution of the problems of shared folders to automatically find and fix some common problems.

  Follow these steps to run the troubleshooter.

  a. Click Start, type troubleshooting and press ENTER.

  b. click on show all the link in the left panel.

  c. click on Shared Folders to run the troubleshooter.

  Also have a look if you have file sharing set up properly.

  For more information, you can consult the following articles.

  File sharing essentials

  Share files with anyone

• Get the error 'windows' failed to start the spooler service on local computer, error 1075 printing when you try to install a printer.

  Hi, printer "spooler".

  IM using widows vista, I had a problem installing my printer, can not install because that the problem with 'spooler service', followed the advice of microsoft and went to services, a window apears, "windows could not start the spooler service on local computer, error 1075 printing;"the dependency service does not exist or has been marked for deletion"can help you please?

  Hello pedro,

  We will remove and reinstall the printer:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Also, here are some links about printing reference:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Satellite L300-1BV - error windows could not start

  When I try to start the laptop it know
  "Unable to start windows. To address the recovery of insert problem disc etc, but I have nothing of this
  below it I got an error message

  file: \windows\system32\winload.exe

  STATUS: 0XC000000F

  Info: the selected entry could not be loaded because the application is missing or corrupt

  can anyone help?

  Of workaround I posted in another thread, but it should work in your case too.
  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  Goodbye & good luck