F20-137: TV Tuner does not work on MCE

Similar Questions

• Qosmio F20 - 135 - location 2 does not work

  Hello

  I tried the upgrade memory RAM in Toshiba Qosmio F20-136. There is a 512 MB 2Rx16 PC2-4200 s-444-12-A3 Samsung, and I've found that 1 one slot works properly. I can install 1GBM RAM in slot 1 and that market but when I install the same Kingston 1 GB or same oryginal Samsung 512RAM in slot 2, this does not work, the computer starts.
  BIOS is 1.40 worm.

  What it wrong?

  Is the second slot defective or there is a compatibility issue.
  Is the Kingston RAM of the same type as the original (DDR2 400 / 533 MHz)?

• TV tuner does not work with SP1 Vista32 on Qosmio G30

  Hello

  My TV card does not work with Vista32 SP1. Material contol said all workers, but the Media Center Receiver service crashes immediately after departure.

  Did someone knows a solution?

  Your Ruediger

  Hello Ruediger

  I don't know if this will help, but try to remove and install the tuner of TV Toshiba - 2.0.0.61129 again. You can find it on the Toshiba support page.

• On my Satellite A660 TV tuner does not work

  Hello

  I bought a Toshiba Satellite A660-07 one a few months ago and then reinstalled Windows 7 32-bit system in order to have more than a few partitions. But I had not deleted the hidden partition the system just in case I need to restore factory settings.

  Now I have moved to a remote area and need a TV but only to discover that the tuner did not work. It is detected correctly under sound devices and games in the Device Manager. However, when I use windows media center to scan channels. The WMC just says the software has encountered a serious error and try again.

  Then I tried to use Blaze DTV, which is also a very popular DTV software. Successfully, it recognizes the Tuner but will not scan either.

  I did some research and used the advocatus of configuration of the tuner TV in Windows 7. The warning message is that "the tuner is not properly configured to be used in Windows Media Center". And the details show that the tuner is plugged but not active for the WMC.

  But how do I then activate the tuner for WMC?

  Really hope that someone can help as I am now panic in a small town remote in New Testament.

  Thank you!

  > I bought a Toshiba Satellite A660-07 one a few months ago and then reinstalled Windows 7 32-bit system in order to have more than a few partitions. But I had not deleted the hidden partition the system just in case I need to restore factory settings.
  I see a big problem here. If you have installed your own version of Windows then you will not be able to start the installation of image factory more.
  Due to this fact Toshiba strongly recommends the creation of recovery DVDs. It is described in s operating manuals.

  In any case, one question at first: you've found the right 32-bit driver TV tuner? TV tuner is installed correctly?

• Qosmio G20-139 of the United Kingdom - TV tuner does not work in Libya

  Hello

  My name is m, k, sh I live in Libya.
  I bought Qosmio G20-139 until now it works normal but I would not use this pc to look at the possibility of using satellite channels. I get only the small screen in the screen of my pc.

  In the operating manual of the said (tv tuner may not only work in the country of purchase. means to the United Kingdom only)
  My equation, what can do to solve the broblem.

  Can I install any software for example or another TV tuner?
  The tv tuner in this pc, what they said is integrated.

  Thank you very much

  Hello

  I think that the UK tuner will not work in Libya due to different video standards. I m talking about different settings PAL and NTSC.

  In your case, it would be desirable to use an external USB DVB - T tuner (if DVB - T is available in Libya) that supports PAL/NTSC in Libya settings.

  I think you have to look at some stores for local laptop/computer and should ask a few merchants for details.

  Welcome them

• Tot on HP Pavilion dv7-1090ed TV tuner does not work after the upgrade to Vista 64 bit Windows 7

  After having upgraded my HP Pavilion dv7-1090ed Vista 32 bit to 64 bit Windows 7 Ultimate, my TV Tuner no longer works. Windows Media Center does not recognize there is that a HP en DVB - T TV tuner is not able to find the digital terrestrial channels-tv, I could look under Vista.

  I searched several for one for the advice and tried to install several recommended drivers but so far without success. Can someone help me with this?

  Hi Charlie54,

  You can try using Recovery Manager to restore the software and drivers (Windows 7) to restore the original drivers, or you can try to install the Windows 7 drivers.

  Here is the Windows 7 drivers for the Software HP MediaSmart Live TV and the TV Tuner driver, they should both be installed.

  I hope this helps, please let me know.

  Thanks and good luck!

• Qosmio G35 - TV tuner does not work in Turkey

  I bought G35-AV650 of us (ntsc) and it does not wotk in turkey (pal)
  is it possible to change NTSC to pal
  Thanks in advance

  CEM

  Hi Cem

  I hope that this document will help you http://support.toshiba-tro.de/kb0/TSB4600QF000OR01.htm

  Good bye

• Qosmio F20: PCMCIA sound card does not work

  Hello world...

  I had a problem with my Qosmio f20. My creative PCMCIA card has been propely work up until a week ago. Now no reason my laptop could not detect it. Even after a format.

  All other works of PCMCIA cards.

  plssssssss help

  The case is clear for me.
  If any other job cards PCMCIA correctly on the F20 and only PCMCIA doesn t creative work then I guess that the card has a malfunction.
  You should test this laptop on another card. If it doesn t work so card is dead.

• Satellite L20-183: PCMCIA Pixelview Tuner does not work with 720 * 480

  I have the following problem:
  I am the owner of a

  Toshiba laptop Satellite L20-183 (1.6 Celeron, 512 MB Ram, Ati radeon Xpress Mobile X 200)

  I just bought a
  Mobile TV Tuner PCMCIA (Prolink) Pixelview PlayTV havig the following specifications:
  http://www.ProLink.com.tw/English/products...ixelView%20Play TV%20Mobile.htm

  as you can see it it says he works at the frame size PAL: 720 x 576; NTSC: 720 x 480

  which is true, but not with my laptop
  It is functional on a laptop HP Celeron 2.8 Mhz, 512 Ram and Ati 9100 IGP

  on my laptop, it only works to the minimum framerate 320 * 288 (as I remember), but then the passage to the maximum framerate of 720 * 480 there are artifacts (horizontal lines) on the right size of the screen.

  I say it again on a similar notebook (talk configuration) with ATI 9100 IGP it works perfectly at maximum framerate.

  Someone told that can a card linked to overaly settings video problem, but it unlikely for me as long as lon semms as he worked on another laptop with ATI IGP 9100, which seems to be older than my video card. (By the way all the parameters and options are the same on two laptops)

  SOMEONE HELLLPPPPP!

  Hello
  Check the BIOS on the toshiba. BIOS in the video settings, there should be a possibility to change the PAL or NTSC. If the value is NTSC I see problems that you described. So as if you right-click on the desktop and select Properties, click on the tab on the far right, a last and properties then go to advanced. Under these properties, it must have an option to NTSC or PAL. Make sure that PAL is thus selected here and see if that solves the problem. I hope this helps.

• TV Tuner does not work on Qosmio G20

  Hello world!

  I have a problem using a TV Tuner on my Qosmio G20. I have re-installed Windows Media Center with a DVD of recovery of product, plugged the antenna and made all configurations (set up the TV signal and scan for more services), but when I press the button to watch TV it says "decoder error - the video decoder is either due to a malfunction or not installed".

  You have no idea what the problem might be, and who is this video decoder? Any help should be. Thank you!

  Hi Tomislav

  I found an explanation. Hope it helps. Check this http://support.toshiba-tro.de/kb0/TSB59015P0006R01.htm

  If the help I want to become reward points!

  Good luck!

• Qosmio G35 - AV600 the TV Tuner does not work in Argentina?

  I bought a Qosmio G35-AV600 in the United States and now I'm in Argentina. I connected the coaxial cable. I have to pay attention to color, but image is random on-site with squares colored all around him. Any suggestion on how to solve it?
  Thank you very much

  Hello

  I think that this problem is related to the NTSC / PAL settings.
  The TV tuner equipped in the notebook for a U.S. market supports only NTSC and this could be the cause of your problem.

  Here is a link to an article in Wikipedia on the PAL:
  http://en.Wikipedia.org/wiki/PAL

  There, I found this:
  + In Argentina, the PAL - Nc (combination N) variant is used. It employs the line field 625/50 per second waveform of PAL-B/G, D/K, H, I, but with a frequency of 3,582 MHz chroma subcarrier. +.

• GADMEI USB TV Tuner card does not work on the new Windows 7 computer

  Original title: usb tv card is not supported in windows 7 x 64

  Hello

  I have new office... everything works fine, the problem is with my tv usb card.

  I tried gadmei model utv882e and utv332e... no one works with my office... but in my laptop with the same version of windows, two tv cards works very well.

  I have no other problems in my pc or tv... cards all drivers are up to date.

  Here is my desktop specs:

  model of motherboard is asus b85m-k

  

  

  Hello Faysal,

  Thank you for visiting Microsoft Community.

  As described in the question, I understand that your two cards of Gadmei USB TV Tuner does not work on your Windows 7 desktop. The same card works fine on another computer in Windows 7 with the same configuration.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What happens when you plug-in card TV Tuner? Your computer will detect the device? Do you have a code or a message when it fails to connect?
  2. Did you check connecting them via a different USB port?

  There may be a possibility that drivers for Gadmei TV sticks are not correctly installed on the computer. We will try these methods below and check if that helps.

  Method 1:

  First of all, I suggest you to run the following Microsoft Fixit to get the problem diagnosed and fixed automatically.

  Hardware devices do not work or are not detected in Windows

  http://Support2.Microsoft.com/mats/hardware_device_problems?WA=wsignin1.0

  Method 2:

  If the fixit above does not resolve the problem, I suggest to download the best compatible driver on the device manufacturer (Gadmei) site or contact Gadmei to get the best driver for your computer and install it.

  You can also read the article below to help update the device driver.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Satellite P305-S8832 - NXP Tuner utility DOES NOT WORK!

  Hello friends, wise

  My machine is a Satellite P305-S8832 (three months) Windows Vista Home Premium fully updated and virus-free. Everything except the tuner FM works fine. In fact, the Fm tuner to work initially. I had not used for the two last month and today, whenever I start the application of FM tuner, it happens, but there's no signal no matter which radio station or I get out all the sounds. I reinstalled the application using the provided by Toshiba Recovery DVD, but nothing takes place.

  I went to the Toshiba site to search for an updated driver, but the site is inaccessible for maintenance :-(. Search Google doesn't have something useful.

  Any advice of mine from sabby here in the forum?

  Hello

  To be honest this tuner does not for me because I use the European model of laptop and I presume this tuner is available on mobile phones in the United States only. Because of this I recommend you to look for the solution to the US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Sorry, buddy, but I think that you may have more luck there.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• Qosmio F20 - WiFi does not work

  I have a Qosmio F20 and recently wi - fi would not work att all or don't work only very rarely. Couple that with the fact that Norton Internet Security has recently kept maxing out the cpu then we disabled from running in the background.

  We tried to set up the network again, we took all the security on the router but Tosh will only see the network if it is directly connected to our router linksys with ethernet cable.

  I took the step of disabling the adapter wi - fi built-in and loading top/installation of the linksys phone adapter that we use for our other laptop HP (older). Even that kept dropping out, connecting for a few seconds at a time, but it was beautiful when he was back in the HP.

  Can someone help me on this one?

  Hello

  did you check if your router does not work properly? And make sure that tries to connect with another access point to verify if you really can't connect with your built-in wireless card.
  May I ask what type of router you have?

  An update of the firmware on the router is sometimes useful.
  Otherwise, try to reinstall all the wifi tricks related like drivers and software and try again, because wifi can be sometimes very tricky.

  Welcome them