F4140 HP all-in-one will save not scanned

Similar Questions

• Photosmart 4700 all in one print but not scan

  My photosmart c4740 (all-in-one) printer will print but not scan

  Hi Donpaladino,

  1. What is the installed operating system on your computer?

  2. what happens when you try to scan documents?

  3. you receive an error message?

  I suggest you to follow the steps and check if it helps.

  Follow the steps in the link and check if that helps.

  HP Multifunction printers - I can't scan in Windows using the HP software

  If the problem persists, you can also check out the links and check if it helps.

  Scan and send (e-mail, send to folder, digital transmission, etc.)

• Dell 964 all in one Photo Printer not Scan

  I have a desktop Dell Dimension 3100/E310 with a Dell 964 All In One Photo Printer.  I have Windows XP on it.

  I had to re - install the printer drives and software.  I can get the documents to print correctly.  I can get the printer to scan by using the controls on the printer.  However, if I try to scan from the Dell 964 all in one Center on the computer, I get an error message that says:

  Scan failed

  Try these solutions:

  * Make sure the all-in-one is powered.  (IT IS).

  * Disconnect and reconnect the USB cable.  (I DID.)

  * Disconnect, then reconnect the power cable from the all-in-one.  (I DID.)

  * Restart the computer. (I DID.)

  Nothing has worked.

  Does anyone have any suggestions?

  Thank you.

  ColemanCreative,

  You should be able to scan from the Dell all-in-one Center.

  Make sure that the application that you want to scan to figure on the list. Try to read...

  Update of the list of applications to send scans to

  If you are trying to scan to a PDF or by fax, you must install the OCR program from the disk of the printer.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• My HP Photosmart C8180 All-in-One Printer does not scan the black and white film strips or slides.

  This problem occurred recently. Previously, the scanner accepted slides and strips of black and white film and scanned them without any problem. Since I've updated the OS on my iMac (I am currently using OS X 10.6.8), I contacted Applecare because I thought that it was possible that my current operating system might have some incompatibilities with the C8180. 'Expert' AppleCare then accompanied me by a uninstall/reinstall, but it has not solved the problem. AppleCare said then that the problem is no doubt HP hardware failure. I find it quite peculiar since the scanner otherwise Applecare analysis works and there is no problem with respect it print or copy.

  Hi, JAOC,.

  Your C8180 can scan slides or films fixed on the memory card.  This will allow you to test the scanning equipment.

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• HP officejet j4580 all-in-one will not print from the internet.

  My officejet j4580 all-in-one printer does not print all that I try to print from the internet, or in microsoft word.  I tried to reinstall, but it gets stuck at 94%, and it took almost 3 hours to get to this point.  What can I do?  My operating system is vista from microsoft.

  Hello

  Here are a couple of things to try.  I would first start by download and run the Diagnostic Print utility.  IF this isn't clear, then try the document on the internet printing problems.

  Print Diagnostic Utility

  Problems printing from the Internet

  See if one of these help.

• My HP C6150 all-in-One will not print. The printer icon appears, but it shows 0 pending work.

  I have just upgraded to Windows 7.  I installed the HP update software/driver for my HP C6150 all-in-One.  I can scan, but I cannot print.  I can print a test page from the HP solution Center under the Toolbox settings/printers; However, it is not a full test page.  I was also able to print an Extended Self Test diagnostic of the HP solution Center under the settings/printer Toolbox.  When I try to print from anywhere else the printer icon appears, but it shows 0 pending work.  Nothing happens, and the icon of the printer ends by goes.  I've uninstalled and reinstalled the software/driver with no luck.  I can't find a patch and update HP says there is no new update.  All diagnostic tests, I'm saying that everything works correctly.  Please help me.

  I was able to remove the printer drivers by using a printer driver removal utility.  The printer driver for Windows Vista and Windows 7 (I've upgraded to Windows 7) were apparently contradictory.  I reinstalled the software/driver and everything is good.  Thank you!

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• Office Jet 8620 (all-in-one) will work w / windows 10

  (1) work 8620 (all-in-one) Will Board jet w / 10 windows?, I replace a photosmart 2610i w / duplexer.

  (2) for the wireless working, I need something for my desktop computer?

  THX

  Yes the new 8620 Officejet Pro will work fine with Windows 10.

  The drivers are here

• HP C5280 All in one printer does not print all of the beginning of the page or end of page

  HP C5280 All in one

  Does not print all of the beginning of the page or end of page

  Hi david skelton.

  I would like that you start by checking that you have the latest drivers for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3204464&

  I hope this helps!

• Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found

  Just upgraded to Windows 7 and my Dell All IN One Printer does not print.  It is said that the pilot of the AIO 942 not found.

  Anyone where I can download this driver?

  See http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20942%20Photo%20All-In-One%20Printer&v=Dell&uid=942STD&pf=0&pi=1&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit.

  There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.

  They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.

• Printer HP 3050 J610 series all in one will not print any documents

  I'm on Windows 7 Service pack 1 and I have a HP Deskjet 3050 J610 Series All - In - One Printer.it is not wireless I use a USB port for printing.   I have problems printing pdf files as well as Word documents.  I uninstalled and reinstalled the software and drivers; I have restarted my computer several times; I tried the scan doctor and he says everything is fine.  It prints the test pages.  When I press the icon of the printer, it will save the file even if the file is saved to alread. I'm going to planet and save the file again.  I noticed that, for files, it says printer and no .doc or .pdF files.  He also says that it is offline.  I tried the steps recommended for this suggestion has as well and still have problems printing.  The I am trying to print the files aren't new documents except one which is a pdf file.  I hope you can help me.  The window pop up that appears just before printing a 0% for printing.  I hope that makes sense.

  Thank you.

  Maria Holloway

  HI Maria, welcome to the forums

  I noticed your post about the problem you are having with your Deskjet 3050, printing via a USB with Windows 7. I have some suggestions that I would like to offer that can help!

  Perform a clean boot and make sure that your firewall is disabled: Disabling and Re-enabling your software firewall in Windows.

  By this stage and test print while the start up programs and the firewall is disabled, it will show if the mobility programmes have been the origin of the problem.

  Now try to print a document as one. PDF or. DOC.

  If it does not, as a workaround option, try to save documents that you have an impression of question as a different file (do not use in .doc or .pdf format) type.

  Open Word or Adobe and print a blank page (without saving the document) to see if you have a problem with printing.

  Please let me know the results, I hope that my information helped!

  Have a great Wednesday