F5Y20UA #ABA: Ram

Similar Questions

• 15 touchsmart F5Y20UA #ABA what's happen?

  Hello

  I have 15 smart Touch F5Y20UA #ABA. Is it extensible outside the ram? Can I upgrade the processor?

  TIA

  Hello

  Data sheet: http://support.hp.com/us-en/document/c04058437

  Manual: http://h10032.www1.hp.com/ctg/Manual/c04341736.pdf

  You have i3 3110 M at present within the Council. You could improve it for i5 3230 Mr. max gain in performance compared to the cost of the part & fresh labor is most likely a NO GO situation in my opinion.

  The best thing you can upgrade is the HARD drive. You can replace it with the same form factor SSD (2.5 "SATA SSD) to get spectacular performance gain.
  I use Samsung 840 Evo SSD in my Pavilion laptop as main drive.

  Concerning

  Visruth

• HP 15-r030wm j2x46ua #aba: CPU/RAM upgrade question

  I want to upgrade my CPU and RAM, but notice 2 things.  1st - the processor is a N3520; is not it is welded to the card or can I spend it?  2nd-if the CPU is only N3520 RAM socket, then the max would be 8 GB 3DDRL or can I use a better?

  Try to find the best RAM.  Now that the processor is welded for sure only 3 things I can do to improve performance.

  1 switch for SDS for the OS and the current use of storage

  2. I do not have a CPU fan, so I guess I can install 1 I hope...

  3 - find the best possible low-voltage RAM but still do not know that I can use.

  I saw manual on how to open it and this laptop just crazy when it requires an almost complete dysection = /

  You are right. He is a Bay Trail N Pentium processor that is soldered to the motherboard and a slot single memory with a maximum of 8 GB of RAM. Manual link seems to be down at the moment.

• 2000 notebook PC E0K72UAR #ABA: upgrade Ram laptop HP 2000

  Hello

  Nice day

  I want to improve my laptop RAM (maximum 4 GB)

  See my system details below

  

  Thank you

  Mohsin Rasheed

  ¡Salut!, @MohsinRasheed:

  Welcome, Forum!

  See this link... http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/HP-2000-2d22dx

• Upgrade of RAM/SSD to the Pavillion DV2500, p/n KC453UA #ABA

  I'm looking to upgrade laptop to my wife for her because she does not want a new.

  The p/n is #ABA KC453UA

  I wanted to replace its 2 GB of memory with a kit of 4 GB and I was wondering if, with the right bios settings, DDR2 800 would work.

  http://www.Newegg.com/product/product.aspx?item=N82E16820231156

  Also to install an SSD, probably one of the Samsung 840 7 mm models.

  Thank you

  Leslie

  Hi, Leslie:

  2 x 2 GB PC2 - 6400 will work well in this model, plug-and-play.

  An SSD... could be problematic.

  I've read some reports of members of the forum where they work, and somewhere they are not - for the most part where they do not have.

  Models of Intel-based laptops have a better chance of working than the nvidia/AMD based on models.

  In addition, the chipset nVidia in your model doesn't support AHCI, so the SSD will not perform at its best, if it works at all.

  My recommendation if you want to upgrade the player, is to choose a model of 7 200 rpm which should PEP to the top search on 5 icon time 400 rpm that comes standard on this notebook.

• Product number: C3Q76UAR #ABA Pavilion g7 RAM does not display all

  When I check my system with the Solution Center, it only shows the 6 GB of memory installed.

  I have two chips.  A 4 GB and 2GB.  It shows that 4 GB.

  I was looking to move to 8 GB, but it will do some good?

  Hi @Falcon50,.

  Thank you for visiting the Forums HP's Support and welcome. I read want to increase the memory on your laptop HP Pavilion g7-2246nr. He shows me on your manual for the specifications page 40 you model.

  You can use a 4 DDR3 SDRAM (2 DIMM). What happens when you put the 2 of them - put 4 2 slot and 2 in the 4 slot?

  He sees always the 4?  Or 2?

  Please let me know.

  Thank you.

• Need to RAM Max and Type: HP ENVY 15-u011dx x 360 convertible

  Hi all

  I have looked everywhere, including the user's Guide and the data sheet, but impossible to find the max memory for this laptop, nor the type of RAM I would need to be upgraded.  He is currently using 2 x 4 GB Samsung 1600 MHz for a total of 8.  The name of the product by HP Support Assistant is HP Envy 15 x 360 PC, product number G6T85UA #ABA, who W8.1 64-bit OS.

  Thank you!

  Hi JimBobRog

  Support of 8192 MB memory RAM DDR3L-1600-MHz system in the following configurations:
  ● 8192 GB (8192 MB × 1 or 4096 MB × 2)
  ● 6144 GB (4096 MB × 1 + 2048 MB × 1)
  ● 4096 GB (4096 MB × 1 or 2048 MB × 2)

  http://h10032.www1.HP.com/CTG/manual/c04341936.PDF

• Ram HP Pavilion Elite m9040n upgrade options

  Hi, my question has to do with what is the best ram to fill my ram slots with. I run windows 7 Ultimate 64 bit and I don't know that I can fit 8 GB total. I'm in recording music with a large number of devices. I have things like a console 003, a 11Rack, a Boss GT - 10, as well as a Piano Yamaha G-1. All are via USB except the 003 (Firewire connection).

  I have a report of sandra to take account of my diet and updates of graphics card.

  Sandra Report!

  SiSoftware Sandra

  Computer

  Model: HP-Pavilion, GN553AA - ABA m9040n

  Working Group: task force

  Host name: Marshall-PC

  User: Marshall

  Processor

  Model: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz

  Speed: 2.4 GHz

  Cores per processor: 4 unit (s)

  Threads by heart: 1 unit (s)

  Type: Quad-Core

  Built-in data cache: 4 x 32 k, the size of online synchronous, Write-Thru, 8 channels, 64 bytes

  Edge L2 Cache: 2 x 4 MB, ECC, synchronous, ATC, 16 channels, 64 byte line size, 2 son sharing

  Computer

  Motherboard: Asus Berkeley

  BIOS: FRIEND 5.13 24/10/2007

  PCI, ISA use: X - Bus PCIe IMB USB FireWire/1394 i2c/SMBus

  Support multiprocessor (MP): No.

  Advanced multiprocessor PEAK (APIC): Yes

  Total memory: 3GB DDR2 DDR3 DIMM

  Chipset

  Model: HP P35/G33/G31 processor to i/o controller

  The front side Bus speed: 4 x 267 MHz (1 GHz)

  Total memory: 3GB DDR2 DDR3 DIMM

  Channels: 2

  Memory Bus speed: 2 x 334 MHz (668 MHz)

  Bars of memory

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Memory module: Micron 8HTF6464AY - 667 7 512 MB DIMM DDR2 PC2 - 5300U DDR2 - 666 (5-5-5-15 3-20-5-3)

  Memory module: (Hyundai) to Hynix HYMP512U64CP8-Y5 1 GB DIMM DDR2 PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3)

  Video system

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Video card: NVIDIA GeForce 9800 GTX + (128 SM4.0 1.7 GHz, 512 MB of DDR3 2.2 GHz 256 bit PCIe 16 x 2.00)

  Graphics processor

  OpenCL processor: NVIDIA GeForce 9800 GTX + (128SP 16 c 1.84 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Compute Shader Processor: NVIDIA GeForce 9800 GTX + (128SP 1.7 GHz, 512 MB of DDR3 2.2 GHz 256-bit)

  Storage devices

  Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB of Cache memory): 298 GB (C (D)

  Generic-Compact Flash (USB): N/a (H

  Generic-SM/xD-Picture (USB): N/a (I

  Generic-SD/MMC (USB): N/a (J

  Generic-MS/MS-Pro (USB): N/a (K

  TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache): n/a (E

  Logical storage devices

  SysReserved: 100 MB (NTFS)

  Hard drive (C : 289 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  FACTORY (D : 9 GB (NTFS) @ Hitachi HDT725032VLA380 (320 GB, SATA300, 3.5 ", 7200 RPM, 7 MB Cache))

  Removable disk (H : n/a @ generic-Compact Flash (USB))

  Removable drive (I : n/a @ generic-SM/xD-Picture (USB))

  Removable drive (J : n/a @ generic-SD/MMC (USB))

  Removable disk (K : n/a @ generic-MS/MS-Pro (USB))

  Optical drive (E : n/a @ TSSTcorp CDDVDW TS-H653N (SATA150, DVD +-RW, CD - RW, 2MB Cache))

  Devices

  LPC Hub Controller 1: HP (ICH9) LPC Interface Controller

  LPC Legacy controller 1: Asus F8000

  Audio device: HP (ICH9) HD Audio Controller

  Audio codec: Realtek Semi 888 high definition Audio

  Serial Port (s): 1

  Disk controller: HP (ICH9) 4 port Serial ATA Storage Controller 1

  Disk controller: HP (ICH9) 2 port Serial ATA Storage Controller 2

  USB controller 1: HP (ICH9) USB Universal Host Controller

  USB controller 2: HP (ICH9) USB Universal Host Controller

  USB controller 3: HP (ICH9) USB2 Enhanced Host Controller

  USB controller 4: HP (ICH9) USB Universal Host Controller

  USB controller 5: HP (ICH9) USB Universal Host Controller

  USB controller 6: HP (ICH9) USB Universal Host Controller

  USB controller 7: HP (ICH9) USB Universal Host Controller

  USB controller 8: HP (ICH9) USB2 Enhanced Host Controller

  Controller FireWire/1394 1: HP FW322/323 IEEE1394 OHCI FireWire controller

  SMBus/i2c controller 1: Intel ICH SMBus

  Printers and faxes

  Printer: Microsoft XPS Document Writer (600 x 600, color)

  Fax: Microsoft Shared Fax Driver (200 x 200)

  Printer: Adobe PDF Converter (4000 x 4000, color)

  Devices

  Network services

  Network card: Intel(r) 82566DC-2 Gigabit Network Connection (Ethernet 100 Mbit/s)

  1 wireless adapter: USB wireless 802.11 b/g adapter

  Power management

  (AC) line status: online

  Operating system

  Windows system: Microsoft Windows 7 Ultimate 6.01.7600

  Compliance platform: x 64

  Windows experience index

  Current system: 5.7

  Increasing tips

  Tip of 2546: memory large-capacity Modules must be ECC/parity.

  Tip 2: Double click on advanced or press ENTER, while a tip is selected for more information on the tip.

  Hynix and Micron produce good RAM modules. I suggest that you go for 4X2GB DDR2-800 memory sticks. Here are the specifications of memory supported by the motherboard:

  Dual channel memory architecture
  Four connectors DIMM DDR2 240-pin
  Supported DIMM types:
  DDR2-800
  DDR2-667
  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports 8 GB on 64-bit PCs
  Supports 4 GB * on 32-bit PCs
  NOTE: * actual available memory may be less

• Want DV7 7255 DX: Can I put RAM in HP Envy DV7 7255 DX

  I have a HP DV7 want 7255 DX, and I look to updrade significantly the amount of RAM. I don't know if I can even update, and if I can improve, how much more I can put in. Here are the specs curent:

  Laptop product #: C6N73UA #ABA

  Curent RAM: 6 GB DDR3 SDRAM (2 DIMM)

  Slot 1: 2 GB Samsung 1600 MHz

  Slot 2: 4 GB Samsung 1600 MHz

  I would like to replace the very minimum, current 2 GB with a 4 GB key (the same as the current 4 GB in there), to have a total of 8 GB. I would also consider that, by replacing the two slots with 8 GB sticks for a total of 16 GB. It looks like my OS is fine with that, just do not know if the motherboard would be able to use it. (IE: I don't want to put in more can be used and only waste money on it, if 8 GB is the maximum).

  I recently installed Avid editing software and it says I need a minimum of 8 GB to operate effectively. I also have Virtual PC installed to run a hidden player XP for old software that I still use, and I noticed a considerable delay in all that done in windows 8.1 while virtual drive is running simultaneously. I suspect that this could be also related to the not enough RAM.

  Bottom line: is it possible to put the amount of RAM, and if so, how can I put it? Thanks in advance for your help.

  I understand that in the certified modules like the original HP or Kingston, manufacturers already proposed this setting, so it's very unlikely for 16 GB hot much more than 6 GB original.

• Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?

  Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)

  So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.

  So first thing, I would like to replace:

  Replace the 2 x 2 GB ram cards default with:

  4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins

  For a total of ram 16 GB with my x 64 bit PC of course

  Link: http://AMZN.to/KtMt9m (note that I buy two)

  Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?

  1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms

  For the graphics card + overclocking.

  Link: http://AMZN.to/IkLTdp 

  Finally no more ATI integrated BS... Please for the love of the creator (will it work?)

  1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI

  If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)

  Link: http://AMZN.to/IFiEa2

  I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...

  -----------------------------------------------

  Card not present upgraded

  HP Pavilion p6510f PC / Nr WW639AA #ABA

  Four cores AMD Athlon 630

  4 GB Ram DDR3

  HARD DRIVE 750 GB

  Integrated ATI Radeon graphics card...

  Power Max Power 250W

  Windows 7 Home Premium 64-bit

  -----------------------------------------------

  Thank you! ~ Of Amerindian

  Hello

  According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.

  You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation.  Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules.  If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.

  You should be able to make your own decision on whether to roll the dice.

• Upgrade of RAM HP Pavilion DV6500

  1 HP Pavilion DV6500

  Service tag: dv6607nr
  

  s/n: {Removed privacy}
  

  p/n: GY131UA #ABA

  serial number: REPLACEMENT-Q21C
  

  2. Windows Vista Edition Home Premium

  Question:

  I would like to upgrade memory of ram on my laptop, so I would like to know what type of memory ram motherboard supports.

  Your dv6607nr system came with preinstalled memory of 1 GB (2 x 512 MB)
  Memory type: DDR2 PC2-5300, DDR2 (non - ECC)
  Maximum memory supported: 4GB
  Slots: 2
  Memory each slot can hold DDR2 PC2-5300 with a maximum of 2 GB per slot.

  I saw that most of the customers were successful in upgrading the RAM using sold by Crucial memory.

• adding ram

  I have a Pavilion media center desktop computer. Product M8010y ggo6av #aBa. It came with Vista and has 3 1/2 RAM. I can 't find someone to tell me if I can add more to it. I have upgraded to win 7. Does anyone know if more can be added. Thank you.

  Hello:

  Here the link to the profile for memory upgrade for your model.

  http://support.HP.com/us-en/document/c00916901

  You need to install a 64-bit operating system so that Windows to address more than 4 GB of memory.

  Any version of Windows (XP, Vista, W7) you have.  As long as it is 64-bit.

• HP Compaq 6005 Pro SFF PC: RAM-I let crucial scan my system

  Crucial scan says I can use DDR3 PC3-14900 • CL = 13 • unbuffered NON - ECC DDR3-1866 • 1.35v • 512Meg x 64... My computer has DDR3 PC3-10600 (1333 MHz)... I thought I had to say with my ram support due to the mobo and cpu speed... SG972UC #ABA, HP Compaq 6005 Pro SFF PC...  I have the chance to buy faster ram if it will work. Thanks if you can help!

  The B97 is not listed on pg 2 illustrated parts Guide.

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• Pavilion dv6700 Notebook PC: RAM upgrades

  Hello;

  I have a HP Pavilion dv6700 Notebook PC with4.00 GB of RAM. It is a 64-bit Windows Vista running operating system. Near future upgrade to Windows 7.

  [personal information]

  My number is: FE809UA #ABA

  My two questions are:

  1: how much RAM can I install in my laptop?

  2: what kind of RAM do need me to install?

  I've looked through the forum on these issues and have found similar information, but not on my exact type of laptop.

  Any help would be appreciated.

  Thank you.

  Thanks for the Info on my RAM modules. Between information on the modules and manual downloadable dv6700, I was able to know what I have in my book. Thaks again.