FACE RECOGNITION is not loaded at system startup

Similar Questions

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• HP probook 4530 s - face recognition does not. How can I delete information provided for this

  How can I delete information of face recognition with which I have provided my HP Probook 4530 s when I started the unit? I do not use the software because it does not work when I try to use it and prefer the fingerprint reader.

  Hello

  Uninstall the system of "facial recognition for HP ProtectTools.

  This will remove the data (you may be asked to confirm this choice).

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  There may be second solution (I am not able to check it out).

  Open the HP ProtectTools Security Manager. Look there for the recognition of face on the list.
  Check all the options of this software. There also may be an option to remove this information.

  If you want to check the latest version of this software, then you can download it from here.

• In PES 11 face recognition does not

  Hello

  Please forgive me if this is a kind of long, or the question has already been asked in the Forum. My research don't did me not a real result.

  I am a complete novice in PSE Organizer.

  My configuration: PES 11

  Windows 7 64 bit

  Everything is up-to-date

  I imported my existing data into the standard catalog

  Face detection is performed "manually."

  The first day (program start) without success with it.

  The next day (new trial) this function has (or very) good use.

  To improve the length and clarity, I only scanned a single folder (no album!). Important: while doing this, I noticed that in a tray at the bottom a 'circle' did the trick. Later I discovered that it is the creation of thumbnails. Then for sure this 'thumb-nailing"was not over! But it worked...

  Yesterday, I started the program again. No possibility of a face recognition. So I started completely again, create a new catalog and import all the data again. Delete the 'old' catalog From one day to the next day then automatically create the miniaturization only.

  This morning, the same procedure: a single selected image (with enough easily recognizable faces), then launch the facial recognition. For a very brief moment, a little pop on the screen is visible, where I can see a filling of progress bar. But no faces suggested to put a name on it.

  Hope that this information is sufficient for some tips

  Jean Gangolf

  PS. Please excuse me if I slowed down all the rules and posted this question 2 times: once in English and once in German.

  Please go to C:\Users\psa.prf \AppData\Roaming\Adobe\Elements Organizer\11.0\Organizer and delete, status.dat file.

  Now launch Organizer and see if it works.

  Thank you

  Catherine

• Menu of applications does not not at the system startup

  I have rebuilt a new installation of Snow Leopard 10.6.2 and VMWare Fusion 3.  Before that, when I was running Snow Leopard 10.6.2 and VMWare Fusion 3 VMWare Applications Menu would launch at the start of my Mac Book Pro.  Now, it will only appear and stand after I startup and performance of VMWare itself and VMWare then close.  I have confirmed in all of my Virtual Machines Menu Applications is defined to always display the menu of the applications in the menu bar and see anywhere where I can get this to run at startup of the system.  Help, please.

  Check if VMware Fusion Helper is set in the connection points (Apple menu > Preferences... > accounts > login items) and if it is not then add.  It is located at: "/ Library/Application Support/VMware Fusion / '.

• Auto Analyzer/face recognition does not end in PSE9

  Running a C2D 2.66 GHz, 4 GB of RAM Vista 32, PSE9.0.

  I'm desperately try to disable those annoying boxes that appear asking Organizer "who is this?  Under preferences, the following are disabled:

  -Recognition people

  -Auto analyzer options

  -J' even made sure this parser run on startup and run the Analyzer only when the system becomes inactive are also disabled.

  I closed the software and restarted my system, but whenever I come back to the organizer of the PSE, it still works, what can I do?  I was able to disable this option in V8, but have so far been in vain in V9. Any thoughts?

  You can disable the option ' who is that?"by unchecking this option to"View-> see the recognition of people. " Please tell if that helps.

• photo iOS 10 face recognition does not not with smart battery from apple on the iPhone case 6

  Hello

  After upgrading my iPhone 6 with smart box Apple iOS 10, I tried the new feature recognition of person of photo enforcement.

  He asked me to connect the phone to the power outlet and lock the screen. I connected my case smart battery with the iPhone in to the charger and waited at least 10 minutes. IPhone person kept asking me to connect to the socket and lock screen battery icon showing that the phone is charging and the case of the battery to 100%.

  As I withdrew my iPhone from the record, plugged directly into the outlet and locked to the screen, picture began to go in my photos.

  Anyone else with the same problem?

  If there is a bug where should I report it?

  Kind regards

  Xavier

  It is a Bug, but I think that if you have agreed to share your Apple device status information, they already know the problem

• face recognition dell windows 8, worthless?

  Nice, but essentially worthless. If in addition to checking your face, you are always asked to enter your password, what point face

  recognition other than to keep track of how you classify each day?

  Face recognition is not recommended because there are people who are like us. If there are similarities in the faces, the system authenticates the user, even if the person is no stranger to the computer. Therefore, stronger methods of protection are recognition of smart cards and fingerprint (more resistant).

  In addition, please note that in addition to the security features extended as facial recognition or recognition of fingerprints, password protection should be enabled, for what is Windows, these biometric devices are not considered as essential (vital to a computer at work, like the keyboard or the mouse) and that's why drivers are not loaded when Windows is in safe mode. Therefore, the protection of password protects your account even in Mode safe.

• Face recognition

  Why all the faces are detected?  I have pictures that the face recognition does not pick up on. How can I add them?

  You ask about the opening or the Photos.app face recognition? On a Mac or on a mobile device?

  Face recognition is a very complicated task. The algorithm of recognition of face in the Photos has been greatly improved with macOS Sierra and iOS 10, but it is still not as good as the human visual system to recognize faces in a photo.

  In applications of photos on a Mac you can add manually, faces that have been missed by the face detection, but this is not possible in the Photos on the iPhone or iPad.

  In the use of the opening ' photos > faces missing Detect "to rescan the photos selected.  And use "metadata > assign names" to name the faces detected and assign the additional faces images.

• DRINKING Windows does not? Expand System reserved

  If your backup Windows tells you that there is not enough memory to create a shadow copy and your destination has a lot of space disk, it's because the system reserved partition is too full. Try the following:

  I took the bull by the horns by the horns, grab the ball and little Bull and expanded my Sys Res to 450 MB partition; It worked a treat by following the instructions in the link:

  http://www.PAGESTART.com/win7br0x8100003301.html
  (It seems pretty complicated, but actually it is very simple. I cheated a bit and did not create a system startup disk, which is my own research and I do not advise anyone else to miss that bit).
  I can now use the Windows backup with no problems at all.
  HR

  Hi Robin,

  Thanks for sharing the information. Good to know that the problem is now solved.

• Face recognition not starting not not by Satellite L300

  Just bought a Satellite L300-13r for my daughter. One of the selling points was the guarantee of face recognition. Only problem is that he isn't starting from the start. Found the software on the computer laptop-even if it has not been shown on the desktop - I had to use the search option. I signed up his face and think that I entered the settings properly, but that's all just not running at startup.

  Whenever I have run the software of Recon face manually, vista wonder confirmation that it's alright to run it. (This would have something to do with the failure to launch?).

  I am also concerned by the gfx chip. It was announced as x 3100 but I seem to have an Intel 965 chipset. Is it the same?

  Hello

  All you need to do is visit the forum good category and take a look a bit and you will find everything what you want ;)
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=35965
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=35626

  According to the specification for computer laptop notebook has you follow components:
  Chipset - GL960
  Intel Chip Set Mobile Intel GL960 Express Chipset
  Graphics Controller Intel GL960

  So I wonder where you found info about x 3100? A link?

• Re: Satellite A200-1ZF how to run the Toshiba face recognition system

  Hello

  How can I use on my Satellite A200 Toshiba face recognition system?

  The only problem with this software is the program do not see my cam.
  I mean... he see cam, but when I try to save the new face in system then I can read something like "the webcam is currently used or there is problem with hardware.

  So I turn off the webcam toshiba utility, but nothing has changed.
  The hand of the webcam is running correctly. Her webcam Chicony as in the series of toshiba A300 same driver is the same (date, time, number, series)
  So if someone knows what could be wrong please answer...

  Thank you
  Good bye

  Hello

  I checked the download page for your laptop Satellite recognition tool and the face is not available, so I assume that you downloaded it for a different model of laptop.
  It is not so important, and I think it should work anyway.

  I have more Satellite P200 and he was also delivered without face recognition tool. I installed it anyway and it works perfectly. My laptop have factory settings and camera Assistant software is DISABLED.

  Your laptop is installed with the recovery image too?

  Try to remove the preinstalled face recognition software and remove the webcam in Device Manager, restart your laptop and try to install it again. It works on my laptop and I see no reason why it shouldn't work on your too.
  On this forum many people asked if this software can run on older models of laptops and a lot of people have confirmed that it works well.

• Face recognition error - you do not have permission to perform this task

  Hello..

  I bought my laptop TOSHIBA of Spain, so it would be for sure in Spanish...
  When I started the tour for the first time I tested the recognition of face and other Toshiba Software and they all worked... but after two days, I changed the display in English language and now I can not enter the facial recognition.

  He said to me 'you are not allowed to perform this task. Please contact your administrator for help.
  so, what should I do?

  Hello

  Found another thread on the same question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65610

  Try the workaround posted here if that's not enough, try to reinstall the facial recognition of Toshiba on your system, once more.

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747