Facebook blackBerry 10 are not not in the hub with 10.3.1

Similar Questions

• BlackBerry smartphones can not sync the calendar with BTYahoo

  I have setup my Blackberry 9780 (running version 6) to synchronize with my BTYahoo email and contacts with success, but the calendar is not just sync.  There seems to not be any interaction between the Blackberry calendar and BTYahoo.

  My service provider is O2.  O2 support said it is a known problem and I have to rebuild my Blackberry, but I hope for a less dramatic solution and one that seems specific to my problem rather than a generic answer to a problem.

  Does anyone have any ideas or knowledge about it?

  Hello and welcome to the community!

  In fact, I'm not sure that what you desire is even possible... refer to this:

  • KB03652 By comparing the BlackBerry Internet Service and BlackBerry Enterprise Server features

  Note that via BIS, calendar wireless is available only for Gmail... not Yahoo. You can check a second time inside the e-mail on the device Configuration Wizard - if you change your Yahoo settings, tic-boxes for the OTA synchronization that is available there. If only the Contacts ICT - box is visible, then calendar is not available for OTA synchronization.

  Good luck!

• When I put pictures on my Mac, I chose my Aperture library. Now there is no pictures in Photos or Aperture! They are all in the photo library, but I don't know why they are not in the pictures when I open it?

  When I put pictures on my Mac, I chose my Aperture library. Now there is no pictures in Photos or Aperture! They are all in the photo library, but I don't know why they are not in the pictures when I open it?

  Sorry try again - your post does not calculate

  They are all in the photo library, but I don't know why they are not in pictures

  What version of the operating system and Photos you have? Explain what exactly you're actually seeing and what has changed since it worked

  LN

• You are not on the latest version of Firefox. Update today to get the best of the Web!

  Whenever I update my firefox, I get this message, you are not on the latest version of Firefox. Update today to get the best of the Web!

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox. I think that Google assumes that you are using an older version of Firefox, as they hard-coded message 'upgrade' in this page - all versions of Firefox see this message.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

  See - How to set the home page

• Whenever I open FireFox browser, I get a message that says, "you are not on the latest version of FireFox." and says click here to upgrade now?

  Actually, it says it's 'you are not on the latest version of Firefox. Update today to get the best of the Web! ", but I use the latest version of Firefox, FireFox 9.0, so there is nothing to be upgraded to! So, why my browser seems determined to force an upgrade on me I already have?

  Do you not see that the message on the site www.google.com/firefox

  The site www.google.com/firefox has been used in versions of Firefox 3.
  
  The current versions of Firefox 4 + is no longer use this website from Google as home page, but use the build-in on: home page as the home page.
  
  Google is no longer seems to keep this page and assumed that you are using an older version of Firefox, if you visit again you and this site warns that you are using an older version of Firefox and invites you to update.
  
  You can ignore this message if you are running the latest version of Firefox, as shown in the window "help > About" (Firefox is updated).
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).

• Why my start page says "you are not on the latest version of Firefox. Update today to get the best of the Web! "when in fact I have the latest version?

  I've upgraded to the latest version of Firefox, but I always get a message on my home page that says "you are not on the latest version of Firefox. Update today to get the best of the Web! »

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained by Google. You seem to have the latest version of Firefox.

  If you want as the Google search page as homepage, change your homepage to Subject: House (a new version of the old homepage Google/Firefox update is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• On my Firefox start page, a message says, "you are not on the latest version of Firefox. But when I go to help, and on Firefox, this window says I'm under 8.0 and Firefox is updated. So, why am I conflicting message? Thank you

  I downloaded Firefox restarted 8.0.1, and it ran. However, I always get a message on my firefox start page saying: "you are not on the latest version of Firefox. But when I go to help and then on Firefox, it says I'm under 8.0 and I'm updating. Why do I get mixed messages?

  The old homepage www.google.com/firefox is obsolete and is no longer used. You can restore your home page for the new default value, so you will get the new homepage.
  
  http://support.Mozilla.com/en-us/KB/how%20To%20set%20The%20home%20page#w_restore-the-default-home-page
  
  Click on the button "Restore default".

• Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

  Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If this does not help, I would like to try a restore:

  https://support.Apple.com/en-us/HT201252

• Satellite A300-20 q are not on the tech support page

  Satellite A300-20 q are not on the tech support page. I can see 20 p, 20R, but not 20 q. Even a model automatic detector cannot find it in a database. Correct this error.

  Hello

  I don't know which pages or the database, you are meaning, but the Satellite A300-20 q is not available in all countries!

  This model was released for the Russia market.

  Other models of Sat A300-xxx are avaialbel on the other countries of South-East European/medium.

  Welcome them

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• The following files are not on the system: not a path >

  I tried to install several is based on different machines, but I have the following error:

  The following files are not on the system:

  Details:
  CDK_Build_Invoke.VI.ProxyCaller > CDK_Build_Invoke.vi > CDK_Engine_Main.vi > CDK_Engine_PreBuild.vi > CDK_Engine_FileExists.vi

  I've done several front facilities on the same project, I'm not sure what I could do to make it appear suddenly.  Has anyone else seen elsewhere?  How can I know which files the installer needs?

  See this article: not a path error received when building an installer.

• Some of my missing Office files and are NOT in the trash. Where should I look?

  I read a warning that removes this photo or file it would remove everywhere. I deleted.  He made my office files disappear as well.  They are not in the trash.  If not where should I look?

  Hello

  ·         Where did you get this warning and how?

  I suggest that you follow the methods and check them off below.

  Recover lost or deleted files

  http://Windows.Microsoft.com/en-us/Windows7/recover-lost-or-deleted-files

• How to block emails that are not in the list of contacts

  I have several e-mail everyday on sexualy explicit materia.  I put in my email account to block those who are not in the list of contacts, so they'll JUNK, but I need to check my JUNK e-mail folder frequently if there is something in there for someone that I have to answer.

  With some of the emails that I can "unsubscribe", but there must be a way to disable these ugly e-mail.

  Any suggestions?

  Margin

  I have several e-mail everyday on sexualy explicit materia.  I put in my email account to block those who are not in the list of contacts, so they'll JUNK, but I need to check my JUNK e-mail folder frequently if there is something in there for someone that I have to answer.

  With some of the emails that I can "unsubscribe", but there must be a way to disable these ugly e-mail.

  Any suggestions?

  Stopping the churn.  If they are unscrupulous - that simply confirms your e-mail address is * well * and it will be resold to new lists.

  Specifically, add them to your list of mail JUNK when you can, if you doubt, you will always receive an email, just to be sure, their entire domain.

  The only other suggestion is to get an other email address for your personal & business needs and start using it.  Make sure that you register for what whatever randomly with this specific e-mail address (control which give you out.)  A * lot * of junk mail occurs usually because someone came to something random at some point and then the address obtained on a 'list' that was happening around / sold.

• How can I retrieve emails that I deleted, if they are not in the deleted box

  How can I recover some old emails that I deleted, but they are not in the deleted box

  Your only option is a file recovery program.  This example: www.piriform.com/recuva

  Steve

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.