Facebook (entire site) runs extremely slow in Firefox.

This does not happen with all the other Web sites. It is extremely slow-scrolling, loading of pages, etc., and each time I have a Facebook tab is open, it slows down the whole browser. The browser returns to normal speed once the Facebook tabs are closed. The worst thing is when I type a message or comment on Facebook - specific messages - he's so bad that I have to stop and wait for the characters to catch up to me, sometimes for several minutes just finish one sentence until I can move my real typing speed. It makes it extremely difficult to use as a communication tool and I don't know what to do about this.

I had this problem (Linux though). Disabling the extension DownloadHelper solved it for me.

Tags: Firefox

Similar Questions

  • My MacBook Pro is running extremely slow all of a sudden. Help, please!

    My MacBook Pro is in running extremely slow all of a sudden, that way for several days now and I can't understand what is the cause.

    Details: MacBook Pro (13-inch, late 2011)

    Processor - 2.4 GHz Intel Core i5

    Memory - 4 GB 1333 MHz DDR 3

    Storage - 500 GB SATA (264.44 498.88 free GB) drive

    OSX - El Capitan 10.11.5 version

    I tried the simple things such as checking for indexing spotlight, my home screen of the size of the compensation, first aid running in disk utility, etc.. But had no results. Any suggestions would be very appreciated!

    Back up all data immediately, as the internal drive may be failing.

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • Dreamweaver cc 2014 running extremely slow

    Dreamweaver CC 2014 is running extremely slow - with essentially no response (using the split or any other mode mode). My version of CC works perfectly - fast and clean. I have not changed anything - I have to install the new 2014 CC and tried and it doesn't fundamentally. What is going on? I have an iMac 2012 - updated my OS a lot of RAM, etc. I have a lot of open fonts, but this has never done other programs - just wondering if perhaps behind the scenes its reading of all this stuff (why would it?).

    Thanks Preran.

    My external drives (nine in total) were originally of course DreamWeaver 2014 to a problem of 'mapping' of readers. However, by connecting the USB drives first, restarting and opening DreamWeaver 2014 once again, it worked as expected. Add two additional discs to high speed and restart again, all mounted drives and checking dreamweaver acted as it should and it behaved as it should.

    That solved my problem.

    Thank you

    Greg

  • iTunes running extremely slow

    I'm having a problem with extreme slowness.  I have read all the post and don't see anything that I could change to correct this situation.  I have my music on an external disk file using the FireWire on my iMac.  I have the latest Mac os 10.11.1 and the latest iTunes version 12.3.1.23.

    I lit the apple music, but I'm not using the icloud or search service

    I have 127,88 GB of music on any external drive

    At this point, I am considering canceling music apple and past to another service, and I plan to download an alternative product to iTunes.

    Is it possible that you and Podcasts iTunes can get their own programs as they do on the iPad and iPhone?

    What would be a good alternative to iTunes?

    Thanks for any help.

    One thing you should do is to run disk utility and test the volume of the external drive to confirm that there is no alteration of the data on it.  You can do this by selecting the disk external volume (indented under the Unit) in the disk utility sidebar.  Click on the button of first aid , then run it.  The corruption of data may cause slow access.  Also, if the player is close to being full, which can strongly increase the fragmentation of data, which can cause slow access, especially if the drive has been through cycles to get closer to satiety, followed erase you data in order to free up space, followed by get start near new...

    My iTunes Media , also on an external FireWire drive folder, is currently 315 GB (with things that take more space as films, TV series, video podcasts, etc.).  I actively use two Match iTunes and music from Apple.  I don't feel any slowness.  You can do additional tests on your system to determine the cause.

  • VMware Fusion 3 running extremely slow...

    First of all, my MacBook Pro:

    Core 2 T9300 2.5 GHz

    4 GB memory

    250 GB SATA HARD DRIVE

    Snow Leopard 10.6.1

    VMware Fusion 3.0

    When I was with Leopard and VMware Fusion 2.x, the virtual machines run fast, but now they are extremely slow. BTW, I have activated the 64-bit kernel.

    I managed to find the reason, it's because the "mds" in the host OS process, is not a problem of the guest operating system. Everytime I turn on my Windows XP in VMware, "mds" will appear in the activity monitor window, and account for about 2% ~ 20% CPU, hard drive usage becomes noisy at the same time. What I could do is just wait, after about an hour, mds will be 'calm down' and my MBP back alone. But, when the next time I turn on my virtual machine, "mds" will appear again...

    "Mds" makes me crazy... I tried to google for answers, but no result.

    Anyone faced this problem too? Or someone knows how to solve the problem? Thank you!

    We found just a bug where in some cases fusion 3 will be a spotlight on every launch search (it is supposed not only to occur once), which seems to be exactly what describes this thread. You can work around this bug open Terminal.app and running

    defaults write com.vmware.fusion PLLibrarySpotlightSearchDone -bool YES
    

    Please let us know if that fixes things (or if not).

  • Convert an Esxi 4 2 Server VM runs extremely slow

    Hello

    I am very new to virtualization and have just the configuration server ESXi 4 that will replace the VM Server 2 systems we tested.  Recently, I tried to convert one of my server-2 VMs (Using the 'Converter Standalone Client') a VM (Version 7) Infrastructure.  After two days of continuous operation, the converter was only 5% finished and was transferring data to 24 kb/s (the server is ~ 150 GB in size).  This seems to be extremely slow and I hope that there is something that I can do to speed up that this server should run during opening hours and I like that, I can't take it down more than the weekend.

    I ran the converter Client on the server that hosts the virtual machine, and that server and the ESXi have dual network adapters connected to a managed switch of FD 100 MB.  (They are both on the same switch).  The virtual machine was not working and there was almost no other network activity going on during the conversation.

    Any help is appreciated

    The goal is to eliminate the things that it is not. Download your installation as simple as possible. I don't know what your problem is, but it certainly seems like a network problem. A single 100 MB network adapter should work much faster than the speed you receive.

    Other things to eliminate are pass the port problems, configuration issues, cable issues, NIC

    Run something like wireshark as you begin your conversion. See if you notice any problems in the capture.

    Create a new fresh installation of the VM on the ESXi host and check the flow rate etc. You don't want to go to production if you have problems. Monday will not be fun if you do.

  • Firefox is running extremely slow while IE is running at normal speed.

    Firefox is slow while I was over an hour trying to ask this question. My characters while typing are delayed a few seconds, and when I try to scroll a page down, there a few seconds delay between each line. Editing pages takes forever. It was working fine and I have no idea what happened past. Conducted a scan for viruses and malware on the computer, but showed no problems. Hate IE so please help.

    h

    Separate the issue;
    Update your Shockwave Flash v15.0.0.152 http://get.adobe.com/shockwave/

  • Mid 2010 Mac Book Pro running extremely slow

    MacBook Pro (15-inch, mid 2010)

    Processor clocked at 2.66 GHz Intel Core i7

    Memory 4 GB

    Software OS X El Capitan 10.11.4

    My mac was slow not normally in recent times. Beginning take at least 10 minutes until I can enter my password, open the folders take 5-10 minutes

    it freezes a lot I would say in the past to days its happened 4 times. I have deleted all unnecessary files, ran a diagnostic (past).

    What should I do now?

    EtreCheck version: 2.9.11 (264)

    Report generated 2016-04-27 18:25:55

    Download EtreCheck from https://etrecheck.com

    Time 05:20

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Hardware Information:

    MacBook Pro (15-inch, mid 2010)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro6, 2

    1 2.66 GHz Intel Core i7 CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1067 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1067 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 707

    Video information:

    Intel HD Graphics

    NVIDIA GeForce GT 330M - VRAM: 512 MB

    Color LCD 1440 x 900

    Software:

    OS X El Capitan 10.11.4 (15E65) - since the start time: about 3 days

    Disc information:

    Hitachi HTS545050B9SA02 disk0: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (disk 1) /: 498,88 go-go (101,23 free)

    Encrypted AES - XTS unlocked

    Storage of carrots: disk0s2 499.25 GB Online

    MATSHITADVD-R UJ-898)

    USB information:

    Card reader Apple

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM2070 hub.

    Apple Inc. Bluetooth USB host controller.

    Computer, Inc. Apple IR receiver.

    Built-in ISight from Apple Inc..

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / System/Library/Extensions

    com.devguru.driver.SamsungComposite [no charge] (1.4.37 - 10.6 SDK - 2016-04-09) [Support]

    com.Digidesign.fwfamily.driver [no charge] (8.0.3 - 2016-04-09) [Support]

    [loading] com.digidesign.iokit.DigiDal (8.0.3 - 2016-04-09) [Support]

    [loading] com.digidesign.iokit.DigiIO (8.0.3 - 2016-04-09) [Support]

    com.Digidesign.mbox2.boot.driver [no charge] (8.0.3 - 2016-04-09) [Support]

    com.Digidesign.mbox2.driver [no charge] (8.0.3 - 2016-04-09) [Support]

    [no charge] com.Digidesign.USB.elevenrack.driver (Digidesign Eleven Rack 1.0.1-2016-04-09) [Support]

    com.paceap.kext.pacesupport.master [no charge] (5.7.2 - 2016-04-09) [Support]

    jp.co.toshiba.driver.ToExtCmd [no charge] (1.0.2 - 2016-04-09) [Support]

    /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

    com.paceap.kext.pacesupport.Leopard [no charge] (5.7.2 - 2009-07-24) [Support]

    com.paceap.kext.pacesupport.Panther [no charge] (5.7.2 - 2009-07-24) [Support]

    [loading] com.paceap.kext.pacesupport.snowleopard (5.7.2 - 2009-07-24) [Support]

    com.paceap.kext.pacesupport.Tiger [no charge] (5.7.2 - 2009-07-24) [Support]

    /System/Library/Extensions/ssuddrv.kext/contents/plugins

    com.devguru.driver.SamsungACMControl [no charge] (1.4.37 - 10.6 SDK - 2015-12-14) [Support]

    com.devguru.driver.SamsungACMData [no charge] (1.4.37 - 10.6 SDK - 2015-12-14) [Support]

    com.devguru.driver.SamsungMTP [no charge] (1.4.37 - SDK 10.5 - 2015-12-14) [Support]

    com.devguru.driver.SamsungSerial [no charge] (1.4.37 - 10.6 SDK - 2015-12-14) [Support]

    Startup items:

    Digidesign Mbox 2: path: Library/StartupItems/Digidesign Mbox 2

    DigidesignLoader: Path: / Library/StartupItems/DigidesignLoader

    PACESupport: Path: / Library/StartupItems/PACESupport

    Startup items are obsolete in OS X Yosemite

    Launch system officers:

    [loaded] 8 tasks Apple

    [loading] 158 tasks Apple

    [operation] 72 tasks Apple

    Launch system demons:

    [loaded] 43 tasks Apple

    [loading] 155 tasks Apple

    [operation] 91 tasks Apple

    Launch officers:

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-03-03) [Support]

    [loading] com.coupons.coupond.plist (2015-09-14) [Support]

    [loading] com.divx.dms.agent.plist (2013-05-19) [Support]

    [loading] com.divx.update.agent.plist (08 / 08/2013) [Support]

    [failure] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2014-07-13) [Support]

    [failure] com.epson.ecpd.launcher.plist (2014-07-10) [Support]

    [failure] com.epson.esua.launcher.plist (2014-10-06) [Support]

    [failure] com.epson.eventmanager.agent.plist (2012-05-08) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

    [operation] com.kodak.BonjourAgent.plist (2012-09-21) [Support]

    [loading] com.lexmark.bmspecificlaunchd.plist (2012-06-27) [Support]

    [loading] com.lexmark.lexprint.plist (2012-01-22) [Support]

    Launch demons:

    [loading]    PACESupport.plist (2009-07-24) [Support]

    com.adobe.ARM [running]. [...]. plist (2016-03-03) [Support]

    [loading] com.adobe.ARMDC.Communicator.plist (2016-03-03) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-03-03) [Support]

    [failure] com.adobe.fpsaud.plist (2016-04-15) [Support]

    com.Apple.aelwriter.plist [loading]

    [ongoing] com.Apple.Qmaster.qmasterd.plist

    [operation] com.digidesign.elevenrack.helper.plist (2009-10-16) [Support]

    [operation] com.digidesign.fwfamily.helper.plist (2009-12-19) [Support]

    [loading] com.google.keystone.daemon.plist (2016-03-02) [Support]

    com.Sibelius.Sari.plist [no charge] (2010-11-23) [Support]

    [loading] jp.co.canon.MasterInstaller.plist (2015-04-13) [Support]

    User launch officers:

    [loading] com.adobe.ARM. [...]. plist (2010-08-30) [Support]

    [loading] com.divx.agent.postinstall.plist (2013-08-24) [Support]

    [operation] com.dtv.vgconnect.plist (2015-08-20) [Support]

    [loading] com.dtv.vgconnect.uninstall.plist (2015-10-13) [Support]

    [operation] com.google.Chrome.framework.plist (2016-04-24) [Support]

    [loading] com.kodak.KODAK AiO Firmware Updater.plist (2016-04-11) [Support]

    [loading] com.kodak.KODAK AiO Software Updater.plist (2016-04-09) [Support]

    [operation] com.kodak.StatisticCollection.plist (2013-07-26) [Support]

    Items in user login:

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Dropbox application (/ Applications/Dropbox.app)

    Application of Google Reader (Google Drive.app/Applications /)

    InfiniteHD Application (~ / Library/Octoshape/InfiniteHD.app)

    fuspredownloader hidden Application (~/Library/Application Support /.) WAS / fuspredownloader.app)

    Other applications:

    [performance]    OpenObject.fuspredownloader.280352

    [ongoing] com.getdropbox.dropbox.238752

    [ongoing] com.google.GoogleDrive.57632

    [ongoing] com.Lexmark.AIO.BM.c36.238112

    [ongoing] com.octoshape.client.251232

    [loading] 402 tasks Apple

    [operation] 195 tasks Apple

    Plug-ins Internet:

    AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-04-21) [Support]

    OfficeLiveBrowserPlugin: 12.2.3 (2010-02-11) [Support]

    Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

    AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-04-21) [Support]

    EPPEX plugin: 10.0 (2014-09-15) [Support]

    Unity Web Player: UnityPlayer version 4.1.2f1 (2013-06-26) [Support]

    googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

    Scorch: 6.1.0 (2009-09-03) [Support]

    iPhotoPhotocast: 7.0 (2010-08-27)

    QuickTime Plugin: 7.7.3 (2016-03-28)

    FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

    Silverlight: 5.1.41212.0 - 10.6 SDK (02 / 02/2016) [Support]

    OVSHelper: 1.1 (2013-08-24) [Support]

    CouponPrinter-FireFox: Version 1.1.5 (2010-02-01)

    DivX more Web Player: 2.4 - SDK 10.5 (2013-08-24), [Support]

    CouponPrinter-FireFox_v2: 5.4.0 - SDK 10.10 (2015-09-14) [Support]

    Default browser: 601 - SDK 10.11 (2016-03-28)

    Flip4Mac WMV Plugin: 2.3.8.1 (2011-01-13) [Support]

    o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-14) [Support]

    JavaAppletPlugin: 15.0.1 - 10.11 (2012-02-26) check the version of the SDK

    AmazonMP3DownloaderPlugin101736: unknown

    User Plug-ins internet:

    OctoshapeWeb: SDK-1.0-10.8 (2015-10-13) [Support]

    Web of Google Earth plugin: 7.1 (2013-06-26) [Support]

    Safari extensions:

    Ultimate - Wondershare - http://www.wondershare.com (2012-12-18)

    DivX Plus Web Player HTML5 < video > - © 2000-2013 DivX, LLC. - http://divx.com (2013-08-24)

    Audio Plug-ins:

    DVCPROHDAudio: 1.3.2 (2011-03-09)

    Digidesign CoreAudio: 8.0.3 (2009-12-19) [Support]

    3rd party preference panes:

    Digidesign Eleven Rack (2009-10-16) [Support]

    DigidesignMbox2 (2011-01-31) [Support]

    Digidesign Mbox 2 Pro (2011-01-31) [Support]

    Flash Player (2016-04-15) [Support]

    Flip4Mac WMV (2011-01-13) [Support]

    Growl (2011-07-01) [Support]

    Tuxera NTFS (2015-02-28) [Support]

    Time Machine:

    Skip system files: No.

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 498,88 GB disc used: 397,65 GB

    Destinations:

    TOSHIBA EXT [Local]

    Total size: 999,86 GB

    Total number of backups: 1

    An older backup: 29/04/15, 18:10

    Last backup: 29/04/15, 18:10

    Backup disk size: too small

    Backup size GB 999,86 < (disc 397,65 GB X 3)

    Top of page process CPU:

    4% WindowServer

    3% kernel_task

    1% Google Drive

    1% fontd

    0% loginwindow

    Top of page process of memory:

    480 MB kernel_task

    Mdworker (7) 115 MB

    WindowServer 74 MB

    Dropbox 61 MB

    Mds_stores 53 MB

    Virtual memory information:

    404 MB of free RAM

    3.60 GB used RAM (1.52 GB being cached)

    71 MB used Swap

  • iMac spinning Rainbow wheel appears each time I click on something and running extremely slow

    My iMac (27 inch, mid 2011) is gel/loading every time I click on something. This occurs on the simplest tasks such as the opening of the finder window, open system preferences, right-click on desktop etc.

    It happened all of a sudden a few days ago and I have not updated recently... I noticed this occurring has started after I opened the Photos Agent app for the first time and imported more than 1000 images/videos of my iPhone6. Could this be the cause of the problem?

    Memory is 4 GB and it has worked very well so far. I checked disk utility and you have no error. Activity monitor looks great too.

    Most important - looking the best way to backup or clone the HDD that I have a very important job out there. What is the best way to do it? I have a Macbook Pro, as well as with 100 GB free on it. Can I use it to help somehow?

    If someone could help me out that would be great!

    Mac form:

    OS X Yosemite 10.10.3

    Processor: 3.1 GHz Intel Core i5

    4 GB OF RAM

    More than 500 GB free 1 t

    iMac, OS X Yosemite (10.10.3)

    Here are my results of EtreCheck (sorry for the bad pictures but I was unable to open the browser to copy paste)

    1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

    The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

    Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

    2. If you have already a current backup backup all data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

    There are ways to back up a computer that is not fully functional. Ask if you need advice.

    3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

    You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

    In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

    You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

    Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

    However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

    4. here is a general summary of what you need to do, if you decide to go forward:

    ☞ Copy a particular line of text to the Clipboard.

    ☞ Paste into the window to another application.

    ☞ Wait for the test to run. It usually takes a few minutes.

    ☞ Stick the results, which will be copied automatically, in a response on this page.

    These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

    5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

    You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

    6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

    7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

    If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

    8. start the Terminal application integrated in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

    9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

    exec bash

    and press return. Then paste the script again.

    10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

    If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

    If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

    11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

    [Process started]
            Part 1 of 4 done at … sec        …        Part 4 of 4 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]

    The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

    Wait for the final "Process complete" message. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

    12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

    At the top of the results, there will be a line that begins with the words «Start time.» If you do not see, but rather to see a mass of gibberish, you don't expect the "Completed" message is displayed in the Terminal window. Please wait and try again.

    If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

    13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

    14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

    ______________________________________________________________

    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

  • Yahoo mail extremely slow on Firefox 17

    I use Firefox 17. Since the launch of the new Yahoo email, it is very slow in response by typing mail. I have no problem opening Yahoo mail using Chrome or IE9. Please advise!

    have you tried to disable the proxy, as I described earlier?

  • Windows Vista is running extremely slow and will not open the Task Manager or connect to the internet

    I have an older Dell running Windows Vista, and it started fine when I got it, but about a month ago it started very slow and refusing to open any program. I can't get the Task Manager to open to all and internet Explorer refuses to connect. I did a complete analysis of the system through Viper and it came out saying: there is nothing more than a few trogans. He also started a taskbar at the top of the screen. No idea how it happened either.

    Hello
    Your computer is probably infected by malicious software. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
    It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
    Brian
  • Windows 7 Home Premium current to run extremely slow, gel

    I am running Windows 7 Home Premium on a 6 month old Dell XPS 630i, who ran Super fast until a few days ago, when things have changed suddenly.  I noticed that it would be "hibernate" and stop responding, despite the fact that I don't have the parameters of active Hibernate.  Then I noticed it works exceptionally slow, each program hangs up.  The CPU says it works at 100% constantly, physical memory is anywhere between 50 and 95% all the time.  I also noticed that now, by activating the screensaver (photos) I get a message saying the folder is empty even if it's not, and it's freezing.  My virus protection office (McAfee) is up-to-date and picked up nothing.  I did a system restore to see if this corrects the problem without success.  I talked to Dell support and they had me go into the bios and increase the power settings (voltage), which helped a bit but it is still cold and slow.  Any suggestions?

    Hello Umeshat,

    Often we see poor performance as the result of a program from loading at startup.

    To solve these, we use the clean boot troubleshooting.

    The following article describes this process:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    This article is an all inclusive version of the processes described previously.

    If this does not work, I recommend creating a new thread for this question so that the community can focus on specific questions of your PC.

    Best regards

    Matthew_Ha

  • HP Probook 4520 s running extremely slow

    Hello

    recently my laptop have been slow (almost at a standstill). I suspected at first, it was a virus, but a test of the virus found nothing. So, I formatted my OS partition and installed Windows 7 Professional and that the essential software that I use. After a short time (1 day), he started running slow. among other things, I freed disk space, but it did not help.

    Then I ran the BIOS boot and test drive, and both returned "error: read failureError: failed to read.
    Help, please.

    Record everything you keep on an external hard drive. You have discovered why she was slowing down. Your hard drive has failed and needs to be replaced.

    The BIOS hard drive Diagnostics is an excellent utility for troubleshooting.

    If your Probook 4520 is still under warranty, contact HP for a replacement hard drive.

    If is no longer in warranty, it's time to buy a replacement hard drive. Once you have installed the new break of hard disk on the set of recovery disks or USB recovery media that you have made.

    Your Probook 4520 s uses a SATA hard drive 9.5 mm, 6.35 cm (2, 50-in). I do not recommend using a SATA3 drive for possible compatibility issues.

    A SATA or SATA2 SSD also works and will be a performance gain true if you choose to go this route.

    A link to the guide to maintenance and Service is here.

  • ESXi 5.1 VM running extremely slow after a power failure

    Help, our virtual machines are run at a crawl since a power outage a few days ago. Everything seems to be in good shape.

    Host is DL385 G7, 12 Dual core AMD, 48 GB memory, data store local storage (4) SAS 600 GB is running in RAID 10 for a total of 1.2 GB

    Where I even begin to start looking?

    4 critical VM:

    Domain controller - Server 2008

    SQL Server - 2008 Server

    Terminal Server - Server 2008 R2

    Mail Gateway - Windows 7

    3 other various OS VM:

    Windows XP

    Server 2008

    Linux power virtual management appliance base.

    I turned off these 3 for now hoping to free up resources (doesn't help anything).

    Memory and CPU use is nothing more than normal. It is sufficient that the virtual machine is so slow to the point where they are almost unusable (block-by-block refresh screens)

    Each client computer is a thin client, and they often lose communication for 10-20 seconds each time, I do not know due to timeouts.

    If the screenshots of the content of the folder of the virtual machine, or anything else would be helpful, let me know.

    Hello

    Everything seems to be in good shape.

    Check the status tab material on the host and the status of all sensors...

    On a host that unmanaged-> Configuration tab - > material - > health

    Then, you can take a look at log files and search for:

    error, warning, fault, panic, trace... "events".

    For ESXi host:

    /var/log/VMkernel.log

    /var/log/vobd.log

    VM log file:

    VMware.log - in the same directory as the files of the virtual machine

    If it is possible to download...

    If you are unable to find anything suspicious in the newspapers using ESXTOP next level...

    For troubleshooting with ESXTOP discover these excellent sources:

    http://www.yellow-bricks.com/ESXTOP/

    Esxtop statistical interpretation

    http://www.VMworld.NET/WP-content/uploads/2012/05/Esxtop_Troubleshooting_eng.PDF

    See also:

    VMware KB: Troubleshoot ESX/ESXi virtual machines performance issues

    VMware KB: Troubleshooting problems of network in a vSphere environment performance

    VMware KB: Determine if the VM and ESX host blocking problem is caused by hardware issues

    VMware KB: Performance high on Windows virtual machines network latency or poor network

    VMware KB: Performance of local storage of the poor for VMware ESXi/ESX troubleshooting controller

    VMware KB: Using esxtop to identify problems of performance of storage to ESX / ESXi (several versions)

    Performance - main list links

    Kind regards

    P.

  • Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

    I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

    The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

    Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

    Thank you in advance,

    Heath

    2 things:

    1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

    2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

    prefvmx.minVmMemPct = "100".

    MemTrimRate = 0

    sched.mem.pshare.Enable = "FALSE".

    mainMem.useNamedFile = "FALSE".

    If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

    Edit: Also make sure that you have installed in your virtual machines VMware tools.

    Dimitri Rodis

    Integrita Systems LLC

    http://www.integritasystems.com

Maybe you are looking for

  • Tecra S4: Black on the screen Image internal during the FN + F5 switch

    Whenever I try to go to the external screen I get a black image on laptop and cannot tilt forward or backward. I use a docking as well what can be?

  • Re: Question Mass Storage Controller

    Hi dear smart heads of the Toshiba forum. I need assistance with drivers for the mass storage controller.I have expenses system connected on my PSAA9E, SP2 of XP with SP3 update on the windows update page. I instaled all the drivers, as the content o

  • Upgrade to windows 10 on a second Witch of desktop Windows 7 on it

    HI I have a second witch destop has windows 7 Home premium 32-bit operating system on it.  Windows 7 did get the 10 windows application in the quiet of the taskbar some time ago and I was waiting for the second Windows Update witch was threshold 2.  

  • Grayed fonts in Premiere Pro

    I think that I managed to synchronize the Typekit fonts on my creative cloud because I can see the fonts in the font list in Premiere Pro, but when I want to use the font list is grayed out. .. and is the solution?

  • Hot Sync hangs at the agenda, agenda appears twice on the list

    I'm trying to migrate my Palm desktop to my new 64 bit Windows 7 PC.  The PDA is a Z22.  I've updated desktop to v6.2.2 and synchronization via infrared, as Win 7 64 bit does not support the Z22. When I try to do my first sync, Hot Sync hangs up on t