Facebook scrambled after mcafee upgraded via IE for remote access

Similar Questions

• I bought Lightroom 3 and installed on my MacBook Pro via a disk. Later, I upgraded via web for Lightroom 5. My question is how can I install a copy of Lightroom 5 on my new iMac?

  I bought Lightroom 3 and installed on my MacBook Pro via a disk. Later, I upgraded via web for Lightroom 5. My question is how can I install a copy of Lightroom 5 on my new iMac?

  Download, install and activate...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• problems VMWare player after the upgrade of windows7 for windows8

  Hello!
  Is it normal to have problems with wmware player after the upgrade of windows7 for windows8?
  first: it was impossible to have lunch at any guest host, I change the value of this line: "vmci0.present" from true to FALSE to start
  and then now, I have no network to all hosts in comments, I tried with the bridge and the NAT mode, it does not work
  and I found this error in the log file:
  VMX | I120: [msg.dictionary.load.openFailed] could not open the file "C:\ProgramData\VMware\VMware Workstation\config.ini": an unknown error (0 x 2) of 2.

  After this file please - looks like a syntax error

• ASA 5510 VPN for remote access clients are asked to authenticate on box

  Don't know what's the matter, but my remote access users are invited to join the ASA before connecting to the tunnel. How can I disable this? Config is attached. Thank you all -

  For remote access connections, you can turn off the prompt xauth (user/pass) with the following:

  Tunnel ipsec-attributes group

  ISAKMP ikev1-user authentication no

  -heather

• How to use ACS 5.2 to create a static ip address user for remote access VPN

  Hi all

  I have the problem. Please help me.

  Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.

  I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:

  1Ajouter step to attribute a static IP address to the user attribute dictionary internal:

  Step 2select System Administration > Configuration > dictionaries > identity > internal users.

  Step 3click create.

  Static IP attribute by step 4Ajouter.

  5selectionnez users and identity of the stage stores > internal identity stores > users.

  6Click step create.

  Step 7Edit static IP attribute of the user.

  I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.

  so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.

  Wait for you answer, no question right or not, please answer, thank you.

  There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached

• AnyConnect 3.0 supports IPSec VPN for remote access?

  Hello world

  I've read about Cisco AnyConnect 3.0 issues that it supports IPSec VPN for remote access:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html

  I downloaded and installed the Client AnyConnect Secure Mobility Client 3.0.0629, but I'm not able to get the IPSec VPN works. Also, it has no option to use the previous of Cisco IPSec VPN client PCF files.

  Can someone point me in the right direction to get IPSec VPN AnyConnect 3.0 work?

  Thank you in advance!

  Hello

  Takes AnyConnect support IPSEC from version 3.0, but only in combination with IKEv2.

  There is no option to use a CPF file with it and the config should be pushed through a profile Anyconnect.

  More information on this:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1325361

  You should also change the ASA config so that it accepts negotiations IKE v2:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/vpn_ike.html#wp1144572

  Kind regards

  Nicolas

• alternatives to LogMeIn Pro for remote access?

  Greetings.  Currently, we have systems in the United States, Switzerland and the Mexico that I supported via remote access using LogMeIn Pro.  We paid for a subscription before free LMI Pro has been abandoned even to appreciate the characteristics of LMI Pro.  But as LMI has eliminated this free service, it seems their subscription rate more than doubled each year.  We currently need remote access to 3 Macs and 2 units of Windows (ew).

  Last year, we paid $174. for the annual subscription in support of these 5 systems.  I just checked on the price of renewal and it shows $349.00 for renewal.  This is getting too expensive!

  Last year, I invested in ARD to support my mother MacBook and the MacBook from an old friend, rather than pay LMI for a subscription in support of these systems.  ARD was a good alternative for these systems, but it is not a realistic alternative to remote systems for charity I help support.  Partly because of the PC, also because what it requires port forwarding in the router and finally because I have to be at my computer to use ARD to access those other systems.  LMI offers the possibility to access systems through an iOS app and can be used by other members of the team of charity, anywhere in the world everyone is physically located.  That's why we have maintained the LMI Pro subscriptions for a number of years.

  But with the perennial increase rate of LMI ridiculous (I think they can take their pricing of Obamacare), I'm on my eternal quest for an alternative to remote access.

  Can anyone offer advice?

  Thank you very much for your review,

  Dee Dee in Florida

  There are:

  -Apple Back to My Mac

  Set up and use Back to My Mac - Apple Support

  -Team Viewer free for non-commercial and paid for commercial use.

  -GoToMyPC, it also works with Mac

• Hyperion Financial Reporting of ports for remote access

  Hello
  Can I know what are the ports should I open to allow remote access to the server Hyperion Financial Reporting for reporting via Hyperion Financial Reporting Studio home pc?
  
  
  Thank you

  You could also have a read of http://john-goodwin.blogspot.co.uk/2013/02/financial-reporting-studio-firewall-fun.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• NAR restriction for remote access clients

  Hello

  just a question how to limit access to users for some NAS servers remotely.

  We have an AAA ACS2.6 servers and several 3640 based NAS server for remote user access. Users are gathered in a group to the ACS.

  We have another group, called ISP. The user in this group can use the internet anywhere in the world, they must dial the local number of the given ISP NAS and all the NAS-you pass the authentication request to our CSA. So we can centrally manage direct RAS users and Internet users.

  The problem is that a user to a certain group can use the other dialin facility since all dialin appemps will be authenticated on the same server.

  How can I limit that an ISP group cannot use the SNS outside the company and that he can not numbering at our dedicated RAS server? And RAD regulars cannot use the internet (which is given to the users of the ISP)

  I applied filters in the ACS on the group settings, but could find no ducuments how configure it exactly. Any help appreciated,

  Kind regards

  Balázs

  Balázs,

  Thanks for sharing your experience. I'm sure that it would be useful for others. Yes, browser is a problem for any management software ;-)

  Thanks again,

  Renault

• authentication 802. 1 x on cisco VPN for remote access

  I'm on dial-up VPN (mobile VPN) on cisco ASA5510, now, I want to authenticate remote users via Microsoft IAS (Radius Standard) service. However, I couldn't get through the via protocol PEAP authentication process, and it seems that it only supports PAP that isn't safe.

  Any suggestion on how to implement PEAP over VPN remote access?

  Thank you

  Hello

  Glance atv http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml

  It may be useful.

  Best regards.

  Massimiliano.

• How to configure VPN 3000 Concentrator for remote access

  I have inherited a VPN concentrator and want to configure it to provide remote access to my internal laboratory network when I'm traveling.  Private interface is configured as 192.168.1.240/24.  Public interface is configured as one of my public IP addresses.  I have a public IP pool on the back side of a cable modem Roadrunner.  I created a pool of addresses for clients such as 192.168.1.200 by 192.168.1.205.  I created all group configurations, group and user base.

  In the IP Routing tab, I see a default route pointing to my IP address of public gateway - the IP address of my box of roadrunner cable modem gateway.

  Since my VPN client, I am able to connect to the VPN concentrator.  I get an address from the pool and check the details of the tunnel under the statistics section shows IP address correct pool for the customer and the correct public IP address of my VPN reorga

  Jeff,

  According to statistics, it seems that the client sends traffic to the hub, but his answer not get back.

  We need check the hub settings itself.

  I need check the hub settings and that it is a GUI based device so I can't even ask to see the technology and the only option available is to WebEx.

  You're ok with webex, pls lemme session comfortable time id and e-mail to send the invitation, it takes no more time and we will carry it out

  Thank you

  Ankur

• Problem with opening programs of text and photos after the upgrade of computer for Windows 8

  Original title: Photos open in Notepad

  Hello

  Laptop with win 8.

  Recently upgraded XP to win8 with purchased MS DVD.

  All text programs open graphics (pictures) in Irfanview & if I send them WORD show as hieroglyphics jeeperish.

  And all the photos to open Notepad in hieroglyphs jeeperish but if I open them with "Sendto" Irfanview or MS photo editor pictures appear.

  Seems the association went haywire. How can I fix this please?

  8 win in my PC is not that.      .. thanx... .Nick

  Hi Nick,

  Please contact Microsoft Community. I understand that you have a problem with opening the programs of text and pictures after the computer upgrade to Windows 8. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem could occur if the default applications are not set correctly.

  I suggest you read the article that will help define the default applications that Windows automatically uses when you open a particular type of file, such as a song, film, photo or Web page.

  Choose the apps Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-8/choose-Programs-Windows-uses-default

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• My video stops when I go to "print preview." After I upgraded my driver for geforce 9100.

  I have a Hp pavilion P6313w, product # AY633AA-ABA.  After that I've updated a driver on my geforce 9100 now my video stops whenever I go to the preview before printing. stops windows to help protect my computer from permanent damage.

  Hello

  Assuming you have Windows 7 64 bit, try to download and install the driver Nvidia original on the link below and see if that fixes the problem.

  http://ftp.HP.com/pub/softlib/software11/COL31486/PV-78240-1/sp44569.exe

  Once the installation is complete, restart the PC.

  Kind regards

  DP - K

• Upgrade license 4402 for additional access Points

  You can apply the L-LIC-WPLUS-25 to a 4402 to enable multiple access points? Or are the 4402 models all locked in their designated access point license?

  Thank you

  -Con

  Hi Con,

  Unfortunately not :(

  The number of support of the AP is "hardcoded" on the WLC model and is not expandable up to 5500 series.

  See you soon!

  Rob

• Disable XAuth for remote access VPN

  Hi guys,.

  I would like to know if I can jump XAuth for access to remote VPN on a router.

  Here's my config, all working beautifully, always on connection I do not see any window username & password after having clicked on the Vpn profile.

  local VPNUSERSAUTH AAA authentication login
  local AAA VPNUSERS authorization network
  ra-user privilege 0 1cannotTELu secret user name
   
  crypto ISAKMP policy 7
  BA aes
  sha hash
  preshared authentication
  Group 2
   
  Configuration group customer crypto isakmp VPNUSERS
  theKEYallneedt0 key
  VPN-pool
  ACL ACL-SPLIT-VPN
   
  Crypto ipsec transform-set esp-3des esp-sha-hmac 3DES-SHA
  crypto dynamic-map VPNDYNMAP 1
  game of transformation-ESP-AES128-SHA
  market arriere-route
   
  list of authentication of card crypto map-OUTSIDE client VPNUSERSAUTH
  list of crypto card authorization card-OUTSIDE isakmp VPNUSERS
  client configuration address card crypto map-OUTSIDE meet
  card crypto 6500 map-OUTSIDE-isakmp ipsec dynamic VPNDYNMAP
   
  local IP VPN-POOL 10.1.24.1 pool 10.1.24.25
  IP extended ACL-SPLIT-VPN access list
  ip licensing 192.168.11.0 0.0.0.255 10.1.24.0 0.0.0.255
   
  Thank you very much!

  Hi Florin,

  In the case of remote VPN access, the user must be authenticated by name of user and password or certificates.
  You can deploy authentication certificate based as follows: -.
  http://www.Cisco.com/c/en/us/support/docs/security-VPN/IPSec-negotiation-IKE-protocols/22520-unityclient-iOS.html#router-config

  This will use the certificate for authentication of users and only requires name of user and password.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.