Faced with problems when running CPC and CPA Imort commands

Similar Questions

• Please, I was faced with problems when creating a new book in Indesign CS6!

  Hello! I'm going to talk to you about my problem: I work for a COMPUTER company in the Brazil and we have developed a five - hundred page manual in Indesign CS6 software.

  Then, we decided that each chapter would be an .indd (document Indesign CS6) and that these 27 chapters would be part of a book (.) INDB).

  Finally, we got our book in the first revision (.) (PDF). In June, we copied our first revision in order to create a second.

  We recorded the second revision of the book (.) INDB) in June 2013. Now, in September, we tried to open this book, once again, to no avail...

  The second revision opens the first review! It's as if we have not saved our second revision, but I'm sure that we did.

  So, please I would like to know:

  (1) what we were wrong in this whole process of creation of new books;

  (2) if it is possible to import a PDF in Indesign CS6, because our PDF is right, but we have our unchangeable.

  I'll be grateful for any help!

  Thanks in advance!

  Making copies does not work the way you think that with books.

  A file .indb is naoual a collection of pointers to the individual files and make a copy, even if you copy individual files, not is not updated where the .indb showed up.

  There are two options here. PACKAGE the book and again work package, or make a new .indb file and add your copied .indd files.

• Need help with problems when running mount on Ubuntu

  I see fuse errors when I'm putting the remote disk using vmware-mount utility. I know I'm missing something here (probably related to the fuse or lib path) but does not know what it is. Would appreciate any help.

  Configuration:

  Ubuntu 8.10 x 86

  VDDK installed

  Fuse is installed (also confirmed as suggested in FAQ questions), here is the result of modprobe:

  fuse of $ modprobe-l

  lib/modules/2.6.27-7-generic/kernel/FS/fuse/fuse. Ko

  Mount command

  $ sudo mount-vmware - v MyDC/vm/VM-TEST-WXP - h 192.168.1.5 u MyDomain\Administrator passwordfile/home/userid/mntpoint f ' [nfs datastore] VM-TEST-WXP/VM-TEST - WXP.vmdk.

  Output

  Can't open the drive: unknown error (1)

  Fuse of initialization failed.

  On Ubuntu, it may be still do better: sudo apt - get install libxml2

  from a command line. Then Ubuntu will notify you when there are updates for the package, and the version of the installed package will be supported by Canonical.

• I am facing a problem when working in the Muse... The problem is that I can't remove my package page, when I try to delete it showing an error and the application terminates. I'm working on an emergency project which, I have to present tomorrow I hope y

  I am facing a problem when working in the Muse... The problem is that I can't remove my package page, when I try to delete it showing an error and the application terminates. I'm working on an emergency project which, I have to present tomorrow I hope you find a solution for the same. Help with the help of Adobe Muse CC

  Liston Hi,

  Steps to follow:

  1. Try to make a new complete site structure in MUSE and try to add a few pages and tries to remove it, just to check its not having not problem
  2. If the problem persists even, check if your site is stored on the external hard drive. Note: site should be registered on internal hard drives.
  3. Try to revive the MUSE, if the problem remains the same, we will refresh the preferences of MUSE.

  Hope it will work.

  Thank you

  Prabhakar Kumar

• BSOD when running games and windows experience index

  Plug-

  AMD phenom 2 x 6

  2 GB ram EVM

  local power 450w

  card Gigabyte mother

  synergy gta 610 2 GB NVIDIA Edition

  I get bsod when running WEI and games

  I have no idea why its happening

  using archer gamma deeepcool for cooling the processor and have a firm of 80 mm fan

  Minidump files - http://1drv.ms/1wD3qeZ (OneDrive)

  Help, please

  CA

  Memtest for the utility of manufacturers of RAM and HD, and CHKDSK for HD.  You did everything

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & win 7 (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

  CHKDSK /R
  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found all the data available in this area could be lost so as always back up your data.
  Run CHKDSK /R from a high command (run as administrator).
  Do this for each hard drive on your system.
  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.
  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.
  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  CHKDSK LogFile:
  Click Start and type "eventvwr.msc" (without the quotes) and press enter
  Expand the topic the Windows logs, and then select the Application log file entry.
  Double-click the Source column heading.
  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
  Copy / paste the results in your next post.

• I m get problem when running IE, Chrome or firefox

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: rundll32.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b0e1

  Fault Module name: sprote ~ 1.dll

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 50212e17

  Exception code: c0000005

  Exception offset: 00079aed

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 16393

  Additional information 1 c: 649

  More information 2: 2d993315539d1b4488dfdd4c43482412

  3 more information: bde9

  Additional information 4: e8c962f1cadf8af02e768e3862dcb56c

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: iexplore.exe

  Application version: 9.0.8112.16450

  Application timestamp: 503723f6

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18541

  Timestamp of Module error: 4ec3e3d5

  Exception code: c0000005

  Exception offset: 00039487

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 16393

  Additional information 1: c453

  More information 2: abcc8f7853b48d9807d6d51eb1fa5df9

  Additional information 3: c453

  Additional information 4: abcc8f7853b48d9807d6d51eb1fa5df9

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

   

  Signature of the problem:

  Problem event name: BEX

  Application name: chrome.exe

  Application version: 21.0.1180.89

  Application timestamp: 503ebf10

  Fault Module name: StackHash_2d77

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 2028ad6b

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 16393

  Additional information 1 / 2d 77

  More information 2: 0f87f8924e80c4cc111b410bf65df663

  Information has additional 3: 408

  Additional information 4: a747d84ca122d3999f6adb84ba0cb3d8

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  These are the messages of problem I m get... Please help me what I have to do...

  Thank you

  Hi Raja DSP,

  1. what version of IE are you using?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible patch with Internet Explorer:

  Method 1: I suggest you to run the fix - it and check if the problem still persists.

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://support.Microsoft.com/mats/ie_performance_and_safety/

   

  Method 2: If the method above is not enough you can follow the steps in the article mentioned below and check.

   

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  If you have problems with Google Chrome and Mozilla Firefox, you see the following link for their respective forums:

  Google Chrome

  http://www.Google.com/support/chrome/

   

  Mozilla Firefox

  http://support.Mozilla.com/en-us/home

  Let us know if that helps.

• Y560 - problems when running games

  Hello world

  I bought the Y560 about a year and half ago and I was a proud owner since.

  A few days ago I formatted drives, then reinstalled Windows and since I have problems executing Battlefield 3.

  The problem is this: after a few minutes of play, the screen freezes and I can't hear a sound of "grrrrrrrrrrr" on the speakers. I can not give any command keyboard and can only force - turn off the laptop.

  I had no problems to run the game before you reinstall Windows, so I guess that the problem lies in a driver conflict, but how do I know which drivers are the cause?

  Anyone have any ideas on how to solve this problem?

  Thank you very much

  Vyksa

  Problem solved! It turned out that the problem was with the game.

  Thanks to you all.

• Problem when running server SOA

  Hi, I'm looking for from the SOA server. I started successfully to Server Admin, but I'm having problems when starting Server SOA. When I'm doing that I get many errors, follow three last lines in the console:
  
  12 characters do not match "Expressions of folklore <>" expected "" "
  TForm is running and is accepting applications
  12 characters do not match "Expressions of folklore <>" expected "" "
  
  When I am trying to start SOA server administration console (settings soa_server1-> control-> check soa_server1-> Start/Stop, then click Start) I get: string received certificate of localhost127.0.0.1 - has no control of verification of hostname. Pawe certificate?-Komputer but check should localhost
  
  Could you help me? If I'm going to write more information.
  
  Thanks in advance
  
  Edited by: 948093 2012-07-23 06:07

  Hello

  It seems that when you call after a command.

  startManagedWebLogic soa_server1 'http://127.0.0.1:7001 '.

  try this way.

  soa_server1 startManagedWebLogic.sh T3: / / :

  Make sure you gave Admin Server port or not.

  Check your config file to check the port and IP address or correct.

  Kind regards
  Kal

• problem when to sell and lend e-books

  Hi all the , in our ACS we sell and lend ebook (we specialize in libraries), we are facing a problem:

  
  -One user (A) bought an ebook (Z) that is preserved in the ADOBE´s DRM.
  -The same person (A) is also a user of a library that uses ADOBE too.
  
  When that (A) user (who has already bought the book (Z)) Decides to ask for the loan of the same book (Z) of the library.  ACS does not include this new iteration is ready and its indefinite access to the book.
  
  We understand that this isn't a very common situation, but we would like to know if this incident can be resolved.
  
  Best regards and thanks!

  Permissions fusion is part of the functioning of ACS4. Assuming that when he bought the book, the user received a more permissive license, it will get this license when it is requested for this book (note: and you will not be charged for the transaction).  The number of loans outstanding for this book will remain the same - for most of the database ACS4 it will be as the loan never took place.

• Import into LR CC problem when recording RAW and JPEG image camera

  I have my unit set up to record the RAW and JPEG formats for each image, but when I import it imports only RAW files.  However, if I take just the RAW or JPEG only it is important as I shoot very well.  I can go to the card and recover JPG files and manually copy them to the directory and then go and import them into LR, but even then, when I'm in the folder they are in they do not appear, but when I go into the parent folder they show.  When the camera creates the FIRST and JPEG files, it gives them exactly the same name except for the extension which indicates if it's RAW format or the. JPG.   I have double and triple checked and the. JPG file is located in the same directory as the RAW file.  When I import the photos I have change the name for a custom name, so when I copy and past the. JPG files in the folder plus the suffix of the file, the file name is also different. How can I solve this problem?

  Hi BullRhino,

  Its setting, you need to activate in Lightroom.

  Open Lightroom > go to Lightroom preferences > general tab > check the option "Separate processing Jpeg in a file" > restart Lightroom.

  See the screenshot below

  

  Let us know if that helps.

  Kind regards

  Mohit

• You know when in PS and you hold 'command' while selecting an object and it gives you the distance to other objects, is there something similar in Muse?

  I would have tried more around for the answer, but I really don't know what this feature is called

  Hey Wilson,

  Please refer to this document: help Adobe Muse | With the help of Guides and leaders.

  Kind regards

  Akshay

• Attempt to connect wi fi on my Dell computer, running windows XP? Have DSL but not Ethernet. Faced with problems. Checked with CISCO router but not help there. CANY anyone help

  I have a problem connecting to a Cisco E100 router to my computer. My count (office) does not have a wireless. I have DSL from. Cisco tells me to plug a router using Ethernet cable to connect. I don't have an Ethernet connection on my computer. At present I have USB connect the computer to the Westell modem.  Can anyone help? I hope this is enough information. Basically what I'm hoping to do is to install the WiFi so I can use a tablet now and maybe a laptop this last on.

  Thank you

  On the routers only house you can use USB connections are those provided by some ISPs.  An Ethernet connection between the router and the computer is far more preferred.

  Your router a Cisco E1000 or is it really E100 (I thought that Cisco makes a model with this designation not)?

  It is quite surprising that you don't have an Ethernet connection that is built into your computer.  What is the complete model number (or, preferably, the Number of Service Dell)?

  Open the Device Manager (start > run > devmgmt.msc > OK).  Expand the "Network card" category by clicking on the + next to him.  What devices are listed in this category.

  If you don't really have an Ethernet or an adapter wireless built into your computer, you can add one, using a PCI internal (if you have a desktop/Tower computer) or external (PC card for laptops) or USB to laptops or desktop/towers.

  Also, the normal configuration is to connect your DSL modem to the router and then the router to the computer.  If your Westell modem has an Ethernet connection, you must use your new router in a non-standard configuration.  Even if the Westell modem has an Ethernet port, you may need to do some reconfiguration for her as well.  What is the complete model of the Westell modem number?

• SSL problem when running Apache httpclient Jrun and not standalone Java

  We use the Apache httpclient 4.1.2 to post on an external server, using SSL. The position works well when it runs since Java JRE, but when the code is running in a JRUN/Colfusion instance that uses the same Java JRE, the error message returned is:

  javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated

  at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:352)

  at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)

  .......

  When you debug the connect using the -Djavax .net .debug = all , the illustrated internal error message is:

  java.lang.RuntimeException: could not generate secret

  Is there some settings strange ColdFUsion, to undo to do this job? We installed the cert of the other server in the/rje/lib/sercurity/cacerts file, but has not made a difference. Why the work of independent java and not Jrun?

  The JDK version is 1.6.0_24 - b07

  ColdFusion: 9,0,1,274733

  OK, the solution was simple, to disable jsafe the right way by adding the property of java command line:

  -Dcoldfusion.disablejsafe = true

  Hope that jsafe is not used for something vital...

• Problem when running Quickstart FunctionExectution

  
  Hello

  I am able to run the quickstartFunctionExecution successfully using two different machines virtual Java but I don't understand two things:

  1. we started not locators, but also the cacheserver from the command prompt, is Don t it is mandatory to do?

  2 example says "* this is the peer FunctionExecutionPeer2 connects to the execution of the function."

  * This peer performs the function execution request and returns the results to

  * the applicant counterpart.

  But I do not understand where Peer1.java we put values to work and OR return the result, what I see is a simple recording function that's all. Only in the peer2 put us the values of the region as well as the execution and get the result using ResultCollector. Please clarify?

  Due to which I changed the code a little and try to run the same but facing problems, and they are:

  Approach We open the same project in two eclipses and modified the peer1.java, peer2.java as below and kept the XML as it is: in the quick start example

  When I run the FEPeer1 into an eclipse, it gives me results (while the data for the region), but when I see an another eclipse, it gives the error:

  Questions:

  It gives NPE because the size of the rc's 2 (despite the addition of 20 records int FEPeer1)? Second thing, it is the list is seen size 2, but the data is null, why so?

  Please help me as soon as POSSIBLE, because it will be easy to buy according to my POC

  Thank you

  Aqamah

  Hello

  (1) it is filtering the results to data from sentinel/marker that represents the end of the result set. You need something like that if the function has hasResult() set to true for the function and peers may not return any data. You must mark the end of the result set with a call to lastResult() which should return something (in this case dummy data which can be removed during the treatment). If you always know that the data will be returned, then this can be managed differently, especially in cases where you use a filter where the function will be carried out to operate on members with known keys. There are two Boolean values returned in a normal use without filter, as there are two servers and each server are collected in a single outcome, before being finally available for the consumer.

  (2) this is an open discussion forum and you do not need to close a question and so you should just start a new thread or question. It is useful to other people who have read the message board if you find an answer or a useful discussion to add this so that it is easier for others to find useful information between questions.

• "Illegal Operation" error when running Malwarebytes and now can't access computer

  Anti-Malware Malwarebytes.com insisted that I have a link to ComboFix and follow his instructions. I did and now do not have access to my PC [Vista] SOFTWARE - not even on my e-mail box. Error message: ""Illegal Operation on a registry key which has been marked for deletion"... not by ME! I don't even know what a "registry key" IS, much less have I ' marked [a] removal!

  I want that my computer back. Help, please.

  Original title: "illegal operation"? NOT MINE! __

  Anti-Malware Malwarebytes.com insisted that I have a link to ComboFix and follow his instructions. I did and now do not have access to my PC [Vista] SOFTWARE - not even on my e-mail box. Error message: ""Illegal Operation on a registry key which has been marked for deletion"... not by ME! I don't even know what a "registry key" IS, much less have I ' marked [a] removal!

  I want that my computer back. Help, please.

  Hey Donald Meyer

  Malwarebytes anti-malware is a stand-alone program that runs on its own

  http://www.Malwarebytes.org/MBAM.php

  Here is some information on combofix for you

  http://www.bleepingcomputer.com/ComboFix/how-to-use-ComboFix

  Do not run ComboFix unless you are specifically asked to by a helper. Also, because of the power of this tool, it isstrongly recommended that you do not follow up on any information displayed by ComboFix without the supervision of a person who has been properly trained. In this case, it can cause problems with the normal functionality of your computer.

  I suggest that you try a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer'shardware be listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller