Similar Questions

• faced with the front camera

  When the superior auto mode, you can not use hdr for the rear camera. But faced with the camera before the automatic mode allows you to choose hdr in the settings. Is this a bug problem or software?

  This isn't a bug. Unfortunately, the HDR is not available in this mode. If you want to use HDR for the rear camera, you must use the manual mode.

• Videos converted with the conversion software video DAM do not play properl

  Videos converted with the conversion software video DAM do not always play correctly

  and

  
  

  The use of Video Manager to check in an additional file video AVI, by clicking on the "renditions" link at the bottom of the page, a page filled with characters scrambled instead of a video playback in Windows Media Player.

  I have configure the FlipFactory with oracle ECM job ststus form Flipfactory her complicated but when I tried the video from ECM not simply
  

  Thank you all,

  I solved the problems that I update the DCU for last vision of 11... 8...

• What is the problem with the conversion of objects with gradients to the gradient mesh?

  What is the problem with the conversion of objects with gradients to the gradient mesh?

  Radial gradients are special, and it could become difficult edit the gradient mesh resulting.

  Take the layer apnel and inspect your objects. You will find a clipping mask the cracks inside.

• ADF_FACES - 60003:Component with the ID: pt1:cil2 not registered Active data.

  When I generate a PDF reports using < af:fileDownloadActionListene > and Ireport this erros fires when I click on active tab.
  I use Studio Edition Version 11.1.2.3.0:
  
  Pt1 is a < af:pageTemplate >
  cil2 we < disabled af:commandImageLink = "#{!}" bindings. CreateInsertEnc.enabled}"id ="cil2 ".
  
  
  
  < af:commandImageLink id = "cil11".
  Binding = "#{backingBeanScope.BakingDocument.cil11} '"
  Icon="/pictures/printer.png".
  shortDesc = "Print" >
  < af:fileDownloadActionListener method="#{backingBeanScope.BakingCotizar.PrintDoc}"/ >
  < / af:commandImageLink >
  Error log:
  
  java.lang.IllegalStateException: ADF_FACES - 60003:Component with the ID: pt1:cil2 not registered Active data.
  at oracle.adfinternal.view.faces.activedata.PageDataUpdateManager.unregisterComponent(PageDataUpdateManager.java:600)
  at oracle.adfinternal.view.faces.context.RichPhaseListener.handleStartAndStopActiveData(RichPhaseListener.java:478)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:487)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  http://tompeez.WordPress.com/2011/11/16/jdev-11-1-2-1-0-dealing-with-adf_faces-60003-error-component-with-ID-r11cb1-not-registered-for-active-data/

  Dario

• Faced with the question to URI on jsp page

  I have a URI on my JSP and I found the tld with jar. JSP and tld has same URI but I get the following error
  
  Error (3.5): no tag library could not be found for this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
  
  In JSP, it looks like this
  
  < % @ taglib uri prefix = "http://xmlns.oracle.com/adf/faces/rich' = 'af' % >
  
  and tld sound like that
  
  tlib < version > 11.1.2.3.0 < / tlib-version >
  < short name > af < / short name >
  < uri > http://xmlns.oracle.com/adf/faces/rich < /uri >
  
  I'll you give more details for my application, see currently, I'm working on the kind of the migration of the thing, my current application is in JDEV TP4 and we use now ADF R1(release 1) jar with the same directory structure, I'm going to migrate my application with JDEV last 11.1.2.3.0 and I need to use the library with this last JDEV R1 not R2 , I tried with R2 I am able to resolve the error, but my requirement is that I must use R1 with JDEV last, and I am facing this error... what approach I need to follow it please suggest me... and also in the IDE, we can add jar from anywhere...
  
  Thanks in advance.
  
  Published by: 982899 on January 20, 2013 22:35

  Hello
  Check project properties > JSP tag libraries.
  more likely is that you have lost the library.

  You can´t use the libraries of adf R1 R2.

• Faced with the question while with ATG Cybersource integration

  Hi all
  
  I am facing problem with address verification while integrating cybersource with ATG.
  Any integration with cybersource is still work correctly.
  
  If I used addressVerificationProcessor VerifyOrderAddresses and mention to use CyberSourceAddressVerify, I get the error associated with the below houseno. box not found
  addressVerificationProcessor = / atg/commerce/payment/CyberSourceAddressVerify
  
  Can someone help me on this please.
  It's urgent. Pls let me know if need more details
  TIA,
  MILIN
  
  Error log:
  
  12:03:01, 992 INFO [ShoppingCartModifier] DEBUG 0 gifts to collect there
  12:03:01, 993 INFO [ShoppingCartModifier] DEBUG add order credit card
  12:03:02, 075 INFO [ShoppingCartModifier] DEBUG error form - stay on the same page.
  12:03:04, 942 INFO [CyberSourceAddressVerify] DEBUG - request-
  12:03:04, 946 INFO [STDOUT] ship_to_state = CA
  bill_state = CA
  ship_to_city = San Jose
  bill_city = San Jose
  bill_country = we
  bill_zip = 95131
  ship_to_country = we
  ignore_avs =
  merchant_id = mykkaushik
  bill_address2 =
  ics_applications = ics_dav
  ship_to_zip = 95131
  bill_address1 = 1, Main Street
  ship_to_address2 =
  client_lib_version = Sun Microsystems Inc./1.6.0_31/Windows 7/6.1/-/Java/5.0.3
  ship_to_address1 = 1, Main Street
  merchant_ref_number = pg460011
  12:03:06, 320 INFO [CyberSourceAddressVerify] DEBUG - response -
  12:03:06, 320 INFO [STDOUT] dav_rcode = 0
  ics_rcode = 0
  ics_rmsg = number of House/box found on the street.
  request_id = 3539115850040180464524
  dav_us_info = S00000
  dav_us_error_info = E421
  request_token = AhijLwSRf7YylSTvL7cYIJ + 1EEDyqAJGlwtJMsXXwMhEAAAA/ED@BGF7'¢
  dav_rflag = DINVALIDADDRESS
  ics_rflag = DINVALIDADDRESS
  merchant_ref_number = pg460011
  dav_rmsg = number of House/box found on the street.
  12:03:06, 364 PipelineError DEBUG INFO [ShoppingCartModifier]: key = InvalidAddress; error = {pg460011 = home
  12:03:06, 367 INFO [ShoppingCartModifier] DEBUG add form exception: InvalidAddress: House/box number
  12:03:06, 367 DEBUG INFO [ShoppingCartModifier] origin of exception: null
  12:03:06, 368 INFO [ShoppingCartModifier] DEBUG Transaction marked as Rollback - redirect to: billing
  12:03:06, 369 DEBUG INFO [ShoppingCartModifier] afterSet sees currentTransaction TransactionImple < a
  nStatus.ABORT_ONLY >
  12:03:06, 369 INFO [ShoppingCartModifier] DEBUG afterSet validation transaction TransactionImple < ac, B
  TUS. ABORT_ONLY >
  12:03:06, 494 INFO [ShoppingCartModifier] DEBUG released the local write lock using id 270000

  There is a problem with the entry that you gave in the field: House / box

  Cybersource error return:
  Home/box number found on the street.

  could you please valid number here who is the number waiting to Cybersource service.

• Faced with the installation of XP SP3 and XP SP2 on HP mini 210

  Hello

  I followed the steps on my computer, HP mini 210, which was completely unusable:

  (1) Mini Partition Master tool used to boot the system.

  (2) remove all partitions, including HP recovery and everything.

  (3) create a new primary partition NTFS and label c.

  (4) restart the system with the bootable XP SP3 or SP2 CD.

  (5) Windows copies all the files and go to "Start Windows"

  ((6) I select one) to install a new Windows XP

  After that XP is not able to identify the partition on the hard drive. It says no hard drive detected or something it starts and asks to press F3 to exit.

  I tried to enter F9 at startup, and it does not show the hard disk; I mean that the HARD disk is not damaged or corrupted.

  Can you get it someone please let me know what to do?

  Hello:

  You must integrate the NM10 chipset Sata driver controller that I zipped and attached below, then XP installs fine.

  Info on how to integrate the driver, please read the guide at the link below, read the Intel section, and read the document that is "slipstreaming" all drivers from Intel.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• Faced with the simple series comms

  Hi all - summer tweak something that should be simple for hours now, so I'll ask for help...

  I have a RS485 device connected to COM5 via a USB adapter, work at 9600 baud, 0,8,1, no - fundamentals of series. I can talk to the device using the terminal software native and even using hyperterminal with the above parameters. It seems obvious, and so I thought that LabVIEW and VISA would connect without too much effort.

  So I use the following simple sequence into LabVIEW:

  -VISA set up the serial port, 9600,0,8,1, none (no error)

  -VISA defined the size of buffer, 4096 with a mask of 48 (no error)

  -Stamps of Ras VISA, the two buffers (no error)

  -VISA write, chain of command is 'PR C2\r\n", which should be echoed and return a numeric value (normally 0)

  -check the bytes to the port property; returns 12

  -VISA read, returns the string of command only, 7 bytes

  why I can't read the full buffer?

  To be honest, I thought that it will work only with a trivial series program: set-read-write. But which still generates an error. I added the size of the buffer since then do a little research and makes without error at least, if not in one of the published examples.

  I don't think it's a matter of time, since I add a lot of late, when I'm debugging, and I tried to put delays read before. The fact that the number of bytes in the buffer is 12 seems to indicate that my answer is here somewhere...

  I also tried a second reading, but it returns nothing.

  Kind regards

  Lamb

  Just disable the tank of the termination.

  This is the reason why you get only one line.

  Or do a second reading at the end.

• Problem with the conversion of getDate() to Date format?

  Hi guys,.

  I need to convert the date selected for DateField string format (for example: yyyy-mm-dd).

  I put the date format DateField as "mm-dd-yyyy '.»

  I tried to get the date of this DateField and tried to convert the format 'yyyy-mm-dd ".

  When I tried, I had a bad outing.

  For example, when I selected 12 months he returned as "00" the following coding.

  SimpleDateFormat dtFormat = new SimpleDateFormat("yyyy-mm-dd");
  Date dtToConvert = new Date(mydatefield.getDate());
  strRequired = dtFormat.formatLocal(dtToConvert); 
  

  Can someone explain what that is the bug with this code or any other way to get the output as my requirement?

  Thanks in advance,

  Stéphane

  Oops, sorry, code should have been...

  DateFormat df = new SimpleDateFormat("yyyy/MM/dd");
  long dateLong = field.getDate();
  Date date = new Date(dateLong);
  String dateString =df.format(date);
  

• Faced with the form validation

  I tried a few days get my code works but I'm not entirely understand error messages.

  I want to do what follows but can't make it work:

  1. validate the fields defined and checkboxes

  2. Enter personalized messages to find errors in a table

  3 display an alert detailing any errors

  If the fields contain data and the checkboxes checked;

  4. save the form in a temporary folder with the name of requisition -' + this.getField("workOrderNumber") //(which contains a javascript script autonumbering)

  5. If all required is supplied attach the form to an email as provided for in the background code

  Event.RC = true;

  msgArray = new Array (errorMsg [0], errorMsg [1], errorMsg [2], errorMsg [3], errorMsg [4] errorMsg [5], errorMsg [6], errorMsg [7]);

  If (this.getField("workOrderNumber").value = "")

  {

  errorMsg [0] = ' you can not pass without an application number, please click in the field to the right top of the page to generate a number. "

  }

  ElseIf (this.getField("DelAddressRow1").value = "");

  {

  errorMsg [1] = 'Please enter the full delivery address;

  }

  ElseIf (this.getField("DeliveryContactName").value = "");

  {

  errorMsg [2] = "Please enter the contact of delivery."

  }

  ElseIf (this.getField("SupplierNameRow1").value = "");

  {

  errorMsg [3] = "Please enter the full name of the proposed supplier."

  }

  ElseIf (this.getField("SupplierAddressRow1").value = "");

  {

  errorMsg [4] = 'Please enter the street number, name and type. "

  }

  ElseIf (this.getField("SupplierAddressRow2").value = "");

  {

  errorMsg [5] = 'Please enter the suburb, State, and postal code. "

  }

  ElseIf (this.getField("SupplierContactName").value = "");

  {

  errorMsg [6] = 'Please enter the name of the supplier contact. "

  }

  ElseIf (this.getField("SupplierContactTelephone").value = "");

  {

  errorMsg [7] = "Please enter the phone number of suppliers."

  }

  else if (msgArray! == "");

  {

  var msgArray = 'there were some mandatory fields, you need to complete...\n ";

  for (var i = 0; i < errorMsg; i ++) {}

  numError = i + 1;

  MSG += "\n" + numError + "". "" + errorMsg [i];

  }

  Alert (MSG);

  }

  on the other

  {

  var cToAddr = [email protected];

  var cReqNum = this.getField("workOrderNumber").value;

  var cSubLine = "request:"+ this.getField("workOrderNumber").value; "

  var cbody = "thank you for submitting your form. \n' + 'save the attachment of the completed form for your records.

  Send the PDF as an attachment to an e-mail

  this.mailDoc ({bUI: true, cTo: cToAddr, bassujetti: cSubLine, CMSG: cbody});

  }

  OK, that makes more sense. The piece of information you miss, it's that the default value of a checkbox when it is not checked (a group or, if none are selected) is 'Off '. Another thing that you're doing wrong is your stop"" command. There is no such thing in JS. If you want to stop a bidding process then it should be part of the script. You can't stop a command to "Submit a form" (not directly, at least, you can stop it by clearing a required field).

  If your code should be something like this:

  if (this.getField("WO").value=="Off") {
      app.alert("Please check a checkbox");
  } else {
      this.mailDoc({cTo: "[email protected]"}); // replace with actual email address
  }
  

• Faced with the hard disk installer...

  Hey, this is my first post.  I tried the trawling through the various forum posts, and other Web sites and videos however I am having a bit of trouble to the where I want to go regarding them have Windows Home Server up and it works perfectly in ESXi.  I have attached a diagram of installation old as running WHS on my HP Server but I wanted to upgrade to WHS 2011, I had and I thought that it is the best time to try virtualization as well.

  I have a physical machine with 3 hard disks.  1 x 250 GB, 1 x 2 TB and 1 x 100GB.  I intend use the 250 GB HD to install my s VM, IE.  WHS 2011 (already completed and running), Linux, XP etc.  However, what I want to do, is when you are logged in WHS, I want to be able to store all my music, photos, media, etc., on the 2 TB drive and to be able to access them in not only WHS, but other BONES as well.  I've read about RDM however, I get nowhere with her.

  On my old configuration, I also had a few runnign programs that would automatically download episodes of TV series for me and place them on the 100 GB hard drive, which was not part of the pool of storage in WHS.  I would then move them manually in the actions concerned.  Basically, I want to be able to do all this in the virtual environment.

  The scene, I am at this time, is that I have esxi installed with WHS 2011 installed on the hard drive of 250 GB.  I can log on and get the WHS Office ETC.

  Can someone help me with this?

  Welcome to the VMware forums communities.

  With the RDM vSphere client are limited to SAN lun.  For a local SATA device, you'll want to use this method - http://vm-help.com/esx40i/SATA_RDMs.php.

• Problems with the conversion of Word files to PDF via macro

  I have a weird problem with the Acrobat add-in. I want to convert a lot of files with the Word Add-In in PDF files. The printer is no option because it causes other problems.

  So I created a small macro for Word that transforms all the Word of a directory of files PDF files. The macro works great, but PDF files look right.

  I show you the problem with a Word file, first converted manually, then with the macro:

  First of all the image:  If the file is converted manually, it seems that the Word file and fonts are included.

  

  Second picture: If the macro converts the file it doesn't seem correct and the fonts are usually not included.

  

  I use Acrobat XI and Word 2010. The macro command is:

  ' new name for PDF
  pdfName = Replace(Replace(verz & "\" & fi.Name, "docx", "pdf"), "doc", "pdf")
              ' convert Word into PDF
              ActiveDocument.ExportAsFixedFormat OutputFileName:= _
                  pdfName, ExportFormat:= _
                  wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
                  wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _
                  Item:=wdExportDocumentContent, IncludeDocProps:=False, KeepIRM:=False, _
                  CreateBookmarks:=wdExportCreateHeadingBookmarks, DocStructureTags:=True, _
                  BitmapMissingFonts:=False, UseISO19005_1:=False
  

  I did not, but the trick is to realize you don't want specific action. Rather, you want to treat a directory. DOCX files in the directory will be converted to PDF, then actions (if any).

• Yet faced with the contact form

  Hey DWers-

  From another thread, I've added form osgood (thanks for posting that). The form appears on the page, but does not work and I do not know because I macerated the code along the way.

  I think it's clashes with the < html > tags existing, but I'm not sure what I can/can ' t get out existing code because it's a little more complicated that I'm used to. It's a delicate design, so I don't want to fix something (e-mail form) and destroy the other (the sensitivity).  I'm ready to knock a Facebook link on the page and say see ya!

  Anyway if anyone has some time, the link is http://www.dirtbikes101.com/contactform.php

  Thanks, thanks and thanks again!

  PS - the error message is

  Internal server error

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Please contact the administrator of the server, [email protected] and inform them of the time, is the error occurred and anything you might have done that may have caused the error.

  More information about this error may be available in the server error log.

  Apache/2.2.3 (CentOS) Server at www.dirtbikes101.com Port 80

• Need help with the conversion of an excel formula.

  I really seem to have a problem with wrapping my mind around Java.  Could someone help me with this particular formula?

  What I'm trying to do is convert a D20 Modern character sheet I created in Excel.  The excel version looks like this: = ROUNDDOWN ((C11) / 2-5, 0).

  Also, is it easy to bind the fields together so that the result of the above equation appears in the right place in terms of 'skills' modifier else where on the page?

  Thanks for any help that you could provide!

  Blair Marshall

  The JavaScript code to place in the event of a field Calculate would be something like this:

  // Custom Calculate script for text field
  (function () {
  
      // Get the field value of C11, as a number
      var v = +getField("C11").value;
  
      // Perform the calculation, round down, and set this field's value
      event.value = Math.floor(v / 2 - 5);
  
  })();
  

  Replace "C11" with the actual field name if it is different.

  If you give the same name fields, they will automatically receive the same value.