Faces in Popup Message

Similar Questions

• Tecra M5 - annoying popup messages when fails the automatic BT connection to headset

  Hello

  I use my Bluetooth from Sony headphones to work with my Tecra M5 laptop lately and there is a boring bunch of message that keeps popping up.

  In the bluetooth settings, I ticked the box "auto login feature will be validated. This causes the headset to connect automatically and it works a treat.

  But, when I bring my laptop home I did more than my helmet with me and about every 5 minutes my laptop keep showing these annoying messages popup at the bottom right of my screen saying the "auto login failed, please ensure that your bluetooth device is turned on etc...". ".

  Sometimes it gives me a prompt in the lower right of the screen asking me if I would like to disable the "automatic login" function for headphones.

  Is it possible to disable these popup messages annoying when my headphones are not detected, without having to turn off the option "auto-connect"? I want to leave the function "automatic login" enabled so when I get back to work and back on my headset again, it will be always connected automatically.

  But when I get home, I wish I could continue to do stuff on my laptop without contstantly being bothered by these electronic popup. If there is some sort of registry setting or something to turn them off, that would be great.

  I downloaded and installed the Blueooth battery & Driver Version 6.40

  See you soon

  Toshiba gave me a beta version of the next Bluetooth stack. There the option you are looking for. Just disable the setting in
  "Bluetooth-> Bluetooth-> Options-> Audio settings-> display a message when the device is connected."
  So just wait until this version is available for download.

• Popup: Message from Web page, your computer is in danger of malware attack... _

  Popup: Message of the webpage your computer is in danger of malware attack...

  I would like to know the name of this diversion, so I can see if it is listed in the malicious software removal tool.

  DO NOT CLICK ANYTHING!
  This is a very common scam that says that your computer is infected with malware
  If you click on anything it will infect you with red antivirus
  to stop it press Ctrl + SHIFT + ESC to start Task Manager. Then, go to the processes tab and finish something named iexplore.exe or firefox.exe.
  This will force all internet browsers close then open them again and do not restore your browsing session

• Annoying PopUp Messages

  I have a Hp Photosmart Premium C410a and when an ink cartridge is low I get (up to 50 at a time now) popup messages telling me that the ink is low and replace it as soon as possible.  There is a checkbox that I click every time saying do not show this message in the future, but I keep getting messages.  How can I stop these messages?

  Thank you

  My problem solved the hard way: kept the printer, got a new conputer and the latest OS from Win8.1.  No more pop ups.

• Control warning Popup Message is empty

  Hello

  I use alert control to display a popup message. For some reason any message is empty and the OK button label is also empty. Popup is launched

  with a white button. If you click the button, then it disappears as it should. Any suggestions?

  Thanks in advance!

  If you use Flex 4.1 and Flex 3 compatibility mode, pop-up windows may lose

  text except if you set layoutDirection = "ltr" on the global CSS selector.

• Apple sends popup messages to change the password

  Apple sends messages popup to an iphone to change a password?

  No, but it is possible that IF you have a work installed on the phone profile, the profile can. It's a working phone?

• Satellite L655 - popup Message 0xC200

  [http://i79.photobucket.com/albums/j127/brannybb/pestmessage.png]

  Hi, I have this weird popup when I start.
  I own a toshiba satellite L655. I have no idea where this came from, but I would like to know.

  I did an analysis of the system using norton, used spybot and malware bytes to analyze, and did a system restore. Please help, thank you in advance.

  Also, here's a screenshot of what it looks like.

  Hello

  For me, the message is clear.
  You tried to install a software that has been detected as malware.
  The screenshot provides no details of the application that could send this pop-up message so it of difficult to say anything about this tool.

  But generally, the software should run in the background in order to send the notification. To check in your right corner (in the taskbar) what applications run.
  You should then see what tool to send this message.

• I get a popup message failed trying to install the KB2570791 update.

  I GET A MESSAGE POPUP FAILED WHEN TRYING TO INSTALL UPDATE KB2570791

  See the section entitled update to the previous cumulative Windows time zone update to this page: http://support.microsoft.com/kb/2570791

  Do you live in one of the locations?  If not, feel free to hide this update optional, not security: you don't need.

• SQL Server Agent locks with popup messages

  My company recently moved our SQL Server 2000 Win 2003 win nt 2000. The server agent produced pop up messages to stop the agent in its tracks as well as the work that run. Some of these messages:
  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Date: 17/09/2009
  Time: 15:50:23
  User: n/a
  Computer: XXXXXXXX
  Description:
  Application popup: {BE649BC4-4EED-4340-A6A8-157D22686F02}: sqlagent.exe - Unable to locate component: this application has failed to start because ESSAPIN.dll was not found. Reinstalling the application may fix this problem.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  http://go.Microsoft.com/fwlink/events.asp

  Event type: Information

  Event source: Application Popup

  Event category: no

  Event ID: 26

  Date: 29/09/2009

  Time: 12:38:17

  User: n/a

  Computer: XXXXXXXX

  Description:

  Application popup: {2DC502A1-7FE0-4E4D-9F24-3C1261123429}: sqlagent.exe - Unable to locate component: this application has failed to start because tsCommon.dll was not found. Reinstalling the application may fix this problem.

  For more information, see Help and Support Center at

  .

  Windows 2000 nt or SQL Server was initially installed seemed not to have those information of .dll in this regard would be greatly appreciated.

  NewtoSQL2000,
  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to SQL Server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://TechNet.Microsoft.com/en-us/default.aspx

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• popup message each startup (boot) - error while unpacking program, code 2.

  I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.

  VISTA Ultimate 64-BIT

  1 MESSAGE POPUP
  "Error while unpacking program, code 2" Please report to author. »

  2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
  "An error occurred when loading library commonforms.dll::RegisterWindow

  It may have been removed. Please reinstall the Application. If the problem persists contact technical support. »

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Microsoft Safety Scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: If no threat found check if the file is necessary or not, then delete it.

  Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.

  Learn how to install Windows Vista Service Pack 2 (SP2):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the information is useful.

• Incorrect popup message.

  Last week I started receivimg this message in a pop up disc.  "not enough space on the F drive.which is my recovery disk HP it is the only drive that shows so much use, close to 100%. I had the additional disk space installed after buying my computer, but except for the speed I really didn't need. The message States to free up disk space to delete old or unused files. This is impossible since it is only my backup programs; so, how can I get rid of this annoying popup. I use a HP pavilion desktop1600n and running

  Vista Home premium SP2. I thought I had read somewhere that HP has acknowledged this problem and posted a solution but I'm not. Would appreciate help please.

  You should not use your recovery disk for something ELSE that hold file recovery system.  You should not backup of it, add files, Defrag, compress, or do something else.

  At this point, you should contact HP technical support to get there advice on how to reapair whatever you have done for this disk partition.  This means probably just delete the backups and files you added, but you should check with them to be sure, since this is your only way to restore Vista if there is a catastrophic failure.  Have you done with the recovery disk recovery disks - it not, and it is supported and even suggested by HP you should do (once you've cleaned the partition).

  You need to find another place for your backups - perhaps an external HARD drive or you can even use CD - RWs - but not your recovery disk.

  Once you have removed everything you added to the partition, the error message should disappear as the partition has enough space for data recovery without causing the error to occur.  If you are close to 100% usage, the warning message is certainly valid.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Smartphones white Smiley Face on the Message Bar notifier

  Hi guys,.

  These last two days, I had a face smiling whites appear on my message notification bar.  I can't click on it as need me just to my calendar enteries.

  I did some digging around and discovered that it might be a BlackBerry messenger friend request but when I open messenger there is no update.

  Anyone got tips?

  My girlfriend has just figured out what was causing the face of smiley on my BB.  It's a game called Hangman - if you have the game, open it and there will be a notification.  Read what he and the smiley will disappear.

• Popup message

  Hello.

  There is a popup with the dialogue on the page.

  In the dialog box, there is a form with a few entries and the button of the dialog OK some values need to be checked.

  UseCase setting the new password and repeat. If repeated the password is incorrect, highlight the field and display a message.

  DialogListener check two values and if they are not equal, displays a message.

  {} public void dialogListener (DialogEvent dialogEvent)

  / * checking the values is omitted * /.

  String msg = "a message";

  FacesContext ctx = FacesContext.getCurrentInstance ();

  FacesMessage fm = new FacesMessage (msg);

  fm.setSeverity (FacesMessage.SEVERITY_ERROR);

  ctx.addMessage (input2.getClientId (ctx), fm);

  }

  The runtime when I click the OK dialog box message appears a moment and disappears. Popup itself is not closed.

  If I click OK once again, the message appears again and stays there.

  Sample application: https://www.dropbox.com/s/k7ofsvik1dcm9i2/NoteInPopup.zip?dl=0

  What I am doing wrong?

  Thank you.

  ADF 12 C

  It will work if you remove autoCancel = "disabled".

  Dario

• Throw the error on a popup message

  Hello

  12.1.3 Jdev

  I have to implement the change password functionality in one of my page. I created a link on my page saying 'Change Password '. When I click on this link a new window comes up with 2 password fields. When I click OK, it calls the method in the managed Bean. Everything works fine.

  But I wanted to throw, and the error message when the entered password will not match. How can I throw the error message in the popup window without closing the popup.

  I tried the codes, but what's going on here is the original popup is closed and a new popup comes up with the error message.

  JboException ex = new JboException("Passwords are different. !!!!!"); 
             BindingContext bctx = BindingContext.getCurrent();
             ((DCBindingContainer)bctx.getCurrentBindingsEntry()).reportException(ex);
  

          FacesContext context = FacesContext.getCurrentInstance();
          FacesMessage facesMessage = new FacesMessage(FacesMessage.SEVERITY_INFO, "Password are different.", "");
          context.addMessage(null, facesMessage);
  

  I wanted are the popup Window with the password window should remain, an error message to show. (in another pop-up window or on the same pop-up window.)

  Popup window code:

    <af:popup childCreation="deferred" autoCancel="disabled" id="popupPwd">
                                              <af:dialog id="d2" title="Change Password"
                                                         dialogListener="#{pageFlowScope.profileBean.changePassword}">
                                                  <f:facet name="buttonBar"/>
                                                  <af:panelFormLayout id="pfl4">
                                                      <f:facet name="footer"/>
                                                      <af:inputText label="New Password" id="it2" secret="true"
                                                                    value="#{pageFlowScope.profileBean.newPassword}"/>
                                                      <af:inputText label="Re-enter New Password" id="it12"
                                                                    secret="true"
                                                                    value="#{pageFlowScope.profileBean.newPassword1}"/>
                                                  </af:panelFormLayout>
                                              </af:dialog>
                                          </af:popup>
  

  See you soon

  AJ

  Check this blog Blog of the ADF (Application Development Framework) that shows how to do this.

  Timo

• PowerCLI and Popup Message or dialog box

  Hello

  Is there anyway to display a message to a user, when the PowerCLI script is complete.

  In addition, if you know another way another popup then, as we did in VBS, I use Message.Show in c#.

  Thank you

  You can display a messagebox with the following lines at the end of your PowerShell script:

  [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
  [System.Windows.Forms.MessageBox]::Show("The script has finished.")