FaceTime does not sound on my iMac

My ring of iPhone and iPad, but my iMac is silent. I looked through the settings but can't find anything to change for the better.

I'm going to assume that you have checked each of these facts:

FaceTime can make outgoing calls.

b. you don't get calls to an email address or iPhone number corresponding to the Apple code that you are currently using. Calls to any other ID Apple that you may have used will not be received.

c. the appellants are not on your list of blocking.

(d) at least one of the callers can call other users of FaceTime - but not you.

If you have verified these facts, please take each of the following steps you have already taken it. Stop when the problem is resolved. Back up all data before making any changes.

1. open the Notifications pane in system preferences. Select FaceTime from the list on the left. The banners or alerts alert style must be chosen - not None.

2. in the same window, select do not disturb. If none of the three top boxes on the right is checked, then all FaceTime calls will be blocked in the corresponding conditions. If you want to use 'do not disturb', but you also want to receive calls when it is active, check or for both the two boxes below, according to your preference.

3. If the built-in firewall application is enabled, please disable it. In case you are worried about the implications of this step, the firewall generally useless when you're on a private behind a router network.

4. If you have installed any third-party 'firewall', 'security', or 'anti-virus' software, remove it according to the instructions of the developer. All these software are worse than useless.

5. If you are connected to a VPN, you disconnect. You may need to remove some third party software VPN completely to solve the problem.

Tags: Mac OS & System Software

Similar Questions

  • I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

    I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

    BabsMKE wrote:

    I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

    settings - do not disturb - off

  • IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

    IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

    Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

    If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?

  • Why is my Apple - Super Drive CD does not connect to my iMac?

    Why is my Apple - Super Drive CD does not connect to my iMac?  That was before I upgraded to el Capitan.  Now it will not allow CD insertion and the icon does not appear on my desktop.  However, the device is displayed in the Finder and seems to rest for more than 15 minutes, try to connect.  Any advise appreciated.

    try resetting the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

  • My new iPhone iOS 9.1 does not appear on my iMac screen 10.6.8.  I don't want to upgrade to El Capitan.  Is there a solution?

    My new iPhone iOS 9.1 does not appear on my iMac screen 10.6.8.  I don't want to Snow Leopard upgrade to El Capitan.  Any suggestions?

    CarbonCopyClone on an external drive in an external enclosure.  Upgrade than SL ElCapitan leaving the intact internal SL.  Start externally using the option key pressed at the start, do what you need with the iPhone, then stop and do what ever you need to again with SL disc.

    Cludgy, but it works.  I keep my SL still functional because there iDVD, but use updated OSXs for other purposes.

  • Receiving wireless audio/video from Sony does not connect to my iMac

    Wireless Sony AV receiver STR DN 840 does not connect to my iMac so I can play iTunes it

    Which iMac do you have?

    To view a video from your Mac to a TV high definition - Support Apple AirPlay

  • Creative cloud app does not start on my imac.

    Hi community

    Creative cloud app does not start on my imac. Once she appeard on the bar menu, but as soon as I started to open a session he disappeard. Anyone know this? I use one I use OSX on an iMac 5K 10.11.3 ultimo 2014.

    Reto

    Just for confirmation, enable the account of Root user and you connect to same and try to launch Adobe Creative Cloud application and check. We can turn off later.

    Let us know if you are able to launch the app or not.

    Root user account activation step:


    OS X Mavericks: enable and disable the root user

    (Applies to Yosemite / El Capitan way)

    How to connect as root

    1. If you are connected, choose quit from the Apple menu.
    2. If you connect from a list of names of users with pictures, click on the other.
    3. In the name field, type: root
    4. In the password field, type the password that you set when you configure the root user account.

    Once you connect to the Root account try to launch creative cloud application and check.

  • Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

    Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

    Please try and delete preview Cache.

    It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

    Default location should folder of the image.

    Kind regards

    ~ Mohit

  • Mozilla does not sound at all applications (youtube, videos...). Have uninstalled and went back to install mozila and nothing! Have uninstalled Fash Player and returned to install and nothing! Can you help me?

    (Excuse me for my bad English)

    See:

    You can click on the Volume icon in the Windows taskbar near the clock and click on the link to mix down to open the mixing console.

    You can adjust the volume level for each application in this window, so make sure that Firefox is not set to mute or set at a low level.

    The current versions of Firefox using the process of plugin-container to run plugins, check the volume control for the process of plugin-container.

    You will see the program Firefox or the Plugin Container in the mixer if you are on a website that plays sound.

  • FaceTime does not.

    Hello

    I recently had this MBA 13 "and after using it for a few days, I found that FaceTime unresponsive. Whenever I try to open FaceTime it shows "app does not. So I have to force it out every time. I had talked to apple support two or three times for this issues and does so to try to resolve this thing.

    1 rebooted Mac several times

    2. first aid normal recovery mode / First aid - all ok

    3 reset SMC

    4 reset the NVRAM

    I've covered a lot of things to deal with, but the result is the same. It does not at all, and it gets really annoying to me. If someone can please help me to solve this will be great. As with the Apple support I don't see a glimmer of hope to solve this.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • Integrated Satellite L655 webcam microphone does not sound

    So my L655-S5150 stopped all of a sudden pick up sound. I tried to update, but it says I already have the most recent update. I went to control panel > sound > recording tab to test the microphone and it doesn't respond when I hit the back of my laptop.

    Does not meet my voice or any other sound.

    Help please?

    How do you use your cam?
    Do you use it with Skype or MSN?

    Have you checked the sound for some applications properties if you use one of them?

  • Tecra M4: EasyGuard advanced instant security - alarm does not sound

    Hello
    Instant EasyGuard Security Advanced
    I followed the instructions to the "request of Iris' to support Toshiba, but the alarm will not sound.
    I know that the motion detectors work because if I shake the phone enough, the hard drive protection popup will be displayed.

    I even confirmed that the wav file that is listed in the registry exists.
    Does anyone have ideas, what I can check next?
    I already reinstalled all the toshiba utilities in the hope that could fix it.

    Hello

    I put t know which unit you have (European or US model) but ask Iris is written for portable Setup US and the preinstalled image is not the same as on European models.

    I checked the Tecra M4 user manuals and it is not listed as this device is equipped with advanced instant security. You see using indicated such CrossMenu about US page?

    Either way, you make a small mistake. In your ad, you have written two different things. Please check HDD protection tool settings and you will see that there is no option for an alarm. What you're saying is a tool separately, but I'm not sure that it is a part of the package of software for your device.

  • I need to remove the photos and when I right click on the photo and does not remove on my imac

    I have a new iMac that I'm trying to learn to use.  I would like to delete a lot of pictures. When I right click on the image of the Word remove does not come to the top.  nothing happens.  There is also no trash can symbol.  How to delete pictures?

    On Photos for Mac application you can delete photos by selecting the photos and entering the key combination command + DELETE ⌘⌫.

    It will work in the moments as well as in the albums.

  • HP Pavilion g7 1178 AC: windows jingle/tune does not sound and the start up programs do not start before the RESET

    When I start my computer, I have the lock screen, enter my PIN and then nothing really happens, I get all the blank screens or error messages just my old image of the windows desktop 7, then I RESTART my pc and then I get Windows Small Volkov song/jingle/air once it starts again , then my lock screen and then my start up programs start at work, bitdefender, toolwiz and things are working properly.  I removed my old windows, clean up the files using the disk.

    I do not understand why the windows little tune does not make its sound until I restart?  Does this mean that windows is does not start properly until I restart?  And would that be why my bitdefender is does not properly start as well. ?

    I checked in the Task Manager after the first start-up, he said that the two programs have been activated, but they do not work properly.  I checked bitdefender and it also says that it is on the startup list, but why he doesn't have the things I have planned to start rebooting?

    It is very frustrating having to start my pc, wait a while, then do a reboot to get things every morning.  Suggestions, ideas, help would be greatly appreciated.

    Thank you for your time, sincerely, Niki

    I too was wondering why * nothing * played, even when I had checked the box "Play Windows startup sound" in the advanced sound settings > Sound > sounds section. After a LOT of research (that brought me here, among others) here are the "definitive"...

    "By Raymond Wong2015-07-31 13:30:22 UTC.

  • The rear camera not as sharp and Tango (Facetime) does not.

    It takes really ugly pictures even after you try to change... Motorola needs to work on ita nd I know the could solve this... How they come out with a phone and talk about facetime if this does not work even with tango.

    UPDATE: Tango has just released a new version that takes advantage of the front camera of the Atrix. Give it a try!

Maybe you are looking for