FaceTime international calls

Similar Questions

• Would I be charged for international calls if I have friends in another country if we use the two wifi?

  I have a friend who is in Germany, and I was texting and facetiming him large amounts of time. Would I get charged for using wifi or is it free?

  Yes, texting, you will be charged for an international SMS, iMessage & FaceTime won't if you use only a wi - fi connection. You can only iMessage and FaceTime with other iOS device. So, since it is another iOS device, if you use iMessage (a bubble of blue text), then that is just data and would not result in not international calls. FaceTime, using a wi - fi connection, once again is just data, and incurs no international calling rates.

• international calls on Skype mobile for verizon

  Can someone tell me. I have Skype mobile app on verizon in the course of the year and used every day international call to my wife, she had too many Skype. And its never deduct minutes in my plan. But his departure since 2 months only. Anyone know why?

  The same thing happened to me.

  I did a lot of Skype to Skype calls Skype Verizon.

  It would show in the recent calls such as calls to numbers 1-(404). But before the monthly statement of account, these calls would be deleted and would not take any minutes.

  But last billing statement has these calls and me 900 minutes overbills!

  So far, I spent 2-3 hours with Verizon support team. Most of them know even unlimited Skype-to-Skype calls. One of the supporters of Verizon has proposed to call Skype support, even if is not Skype, but Verizon, which bill me. Finally, a subject support person the question to offline customer service which will be answered Friday.

• Not able to receive any (Specific) International Calls on my motorcycle A953

  Hello

  I bought my Motorola A953 of the United Kingdom last month. I recently moved to China. I am faced with this particular problem in which I'm not in a position of some specific operators in India Mobile International calls (I get calls/local calls of the India, fixed Germany etc.). I get a call & on the first ring drops appeal & is marked as a missed call. I raise this question in this forum because I tried to use the SIM card in another mobile & it works well?

  I use 64 K SIM of China Mobile.

  Please let me know of any resolution. Thank you.

  Arnab Sinha

  Shanghai, China

  Ah well, changed my mobile operator China Unicom & sound very well now.

  Thank you.

  Arnab Sinha

  Shanghai, China

• Problem with GCE international calls

  Hi all

  I have my router CME with two different link:

  the first is the VOIP and the second is POTS

  I need to allow international outgoing calls be routed via the link of POTS

  So I made these commands:

  voice pots Dial-peer 5
  corlist outgoing international call
  International call through TT description
  preference 1
  destination-model 000 t
  port 0/0/0:15

  I also configured the international calls through SIP TRunk by using these commands

  Dial-peer voice voip 2200
  corlist outgoing international call
  Description * International Outgoing Call to SIP Trunk *.
  translation-profile outgoing PSTN_Outgoing
  destination-model 000 t
  session protocol sipv2
  session target ipv4:192.168.2.51
  codec voice-class 1
  voice-class sip dtmf-relay rtp - nte force
  DTMF-relay rtp - nte
  No vad

  The problem is that calls always goes in the SIP trunk while I've specified the upper value of the preference for POTS

  Y at - it all missconfiguration

  Please help me it is urgent!

  Add "preference 2" under the VoIP dial peer. Please note that when you set the order of preference, the lower part, number preferably, more priority. Absolute priority is given to the counterpart of dial with preference order 0 and it is the default value.

  Manish

  -Does the rate of useful messages

• BlackBerry Smartphones International calls problem

  Hello
  I am a citizen in South Africa and has a Blackberry8520. A friend of mine recently went to Sudan for six months. He tried to call me and his calls do not come through, and when I try calling it the only thing I hear is many beep sounds.

  Could someone please help with the procedure that I have to take in order to allow incoming and outgoing international calls.

  Your help is highly appreciated

  Of course not. If the option can allow it, it also has the ability to disable.

• FaceTime incoming calls ring my laptop and iPhone

  I have set up on my MacBook Pro of FaceTime. I installed on my iPhone of FaceTime.

  Pretty much any incoming call on my iPhone sounds too my MBP. When I answer the iPhone the MBP guard sounds.

  I don't mind the two sounds, but how I put it up until the MBP stop ringing when I answer to the iPhone?

  Thank you for treating me as a technoturkey. Use short words and phrases

  iPhone 4 s, iOS 9.3.1

  He shouldn't continue, when I get a call two iMacs, ring of iPad and iPhone and all stop when I answer

• I have an iPad 2 Air myPhone does not appear at the bottom of the screen on FaceTime, when call is received. Tried typing the wallpaper nothing.  Could I have accidentally disabled something?  Any suggestion would be appreciated.

  I have an air of the iPad 2. I can't answer my incoming calls on facetime no phone on the screen.  I tried to hit the bottom of the screen and nothing happened.  could I have accidentally disabled somethng? Any help would be appreciated.

  Hello Freckles60,

  After reviewing your post, it looks like you aren't able to answer calls FaceTime on iPad. I recommend you to read this article, it may be able to help solve the problem.

  Get help if you cannot make or receive calls FaceTime - Apple Support

  Thank you for using communities of Apple Support.
  Good day.

• Internal call problem

  Hello

  I am trying to deploy a UC520/SPA8000 pour usage of 3 DECT phones.

  I followed the documentation pour a SPA8000 with UN UC520 Integration

  My DECT phones come calling to the outside and to internal phones but on the other hand I can't call my DECT internally I falls directly on the e-mail.

  If I turn off the messaging that rings busy.

  I've done the same Deployment at United Nations another customer without problem.

  The difference is that the previous customer USE of T0 and LUN there use a SDSL/Sip connection at OpenIp.

  Would you have an idea

  Thank you

  Gregory

  Hi Gregory,

  The only thing I can tell you, I did once a migration of a CME that turns on a 2801.

  On East past two two T0 to a BIV Orange that virtual the T0 emule (it's the Orange room router which transforms the signal T0 en IP pour out their voice network).

  When we did the rocker we had trouble with incoming and outgoing calls.

  It turns out that we have the add commands on the 2801 BRI interfaces:

  interface BRI0/0/0

  no ip address

  basic-net3 ISDN switch type

  ISDN point - to point-setup

  ISDN incoming-voice

  ISDN k 7

  ISDN send-complete

  Info-transfer-ability of outgoing voice ISDN 3,1 kHz audio

  ISDN tei static 0

  Idem pour interface BRI0/0/1

  Hoping that cel can maybe help you

  Greetings

  Benoit PETRY

• VCS Expressway outside to endpoints internal call

  I have a new implementation where internal control 1 to VCS in LAN and VCS Expressway in DMZ 1.

  VCS Expressway has an IP public address/NAT.

  Currently, we have a group of VC endpoint, each endpoint has a public IP/NAT to the local network, to allow internet to make H.323 call directly by public IP address of the composition of the endpoint.

  My question is, after having implemented VCS Expressway in DMZ, how do the numbering plan at each endpoint internal VCS Highway outside call? Do I still need to give to each endpoint an ip/NAT publich.

  Thank you very much.

  A much simpler and in my opinion, more elegant and more scalable solution would be not to use IP addresses for calls, but to allocate and register outcomes with E.164 alias. That way you all you need is the internal IP address.

  So the outer ends may, in this case, call your settings using the [email protected] / * / or [email protected] / * /-E_IP_address.

  Internal assessment criteria can call each other using alias only for as long you have the rules of research in place, and cannot therefore have the external ends you will allow to record with you VCS-E for one reason or another.

  If you have the outcomes of Polycom external with the old version of the software that does not support Annex O URI component, then it's very simple to include a transformation of prior research on the VCS-E which will allow these settings call using owners 'numbering URI "; VCS-E_IP_address ##Alias - and if you, on the odd occasion, a final point which cannot use anything other than IP addresses, you can configure the alias of relief on the VCS-E to point to a specific or a standard automatic on a MCU, purpose etc.

  A dial plan using as above will also allow you to use DHCP addresses, the alias remains static, and that's what counts, addresses much simpler to give to people. e.g. 123456 is much easier to remember than 202.138.98.23 etc, not to mention the IPv6 addresses, and because you save your settings with domain name, and then customers SIP will also be able to connect very easily.

  /Jens

• BlackBerry Smartphones International calls BB bold

  It is necessary to enter the number code (IDD) out, as I do with my land line, when I make an appeal to Europe or the phone it will take just the + sign followed by the country code, I call and the phone number?

  You can use the + followed by the country code. It should also work

• Country code for international calls to the API

  Hello

  It is possible to get the country code and area code is defined in the option of smart dialing on the BlackBerry API? I use OS 6.0.

  I can get the other locale information such as country and language, but not the County and area code.

  Any idea?

  Thank you.

  These values are not obtained using the API as far as I know.

  I provide it to the application and select the correct one based on the table

• Lync 2010 - different tone for internal vs external calls

  Is there a way to Lync 2010 to make a distinction between internal vs external calls? Now, if you are already online, you get a beep if a call comes in to the general response group or if it comes from an internal caller.  How can I configure the system so that people can make a difference? All suggestions will be useful!

  Hello

  The question you have posted is related to Lync2010 Forum, and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs/

  You can also check this link: http://technet.microsoft.com/en-us/library/gg195677.aspx

• COR - internal block calls on CME

  Hi expert...

  is anyway to block internal calls on the CMF?

  for example, the extensions RouterA 1000,1001 and RouterB 2000,2001 extensions... I want to limit to 1000 will not be able to call 2000, but 1000 can call 2001

  I tried to configure as below, however, I still can call 2000 1000

  RouterA

  Dial-peer cor custom
  name 2000

  Dial-peer call list call2000
  Member 2000

  Dial-peer voice 2000 voip
  corlist outgoing call2000
  destination-model 2000
  session target ipv4:10.0.0.2
  Codec g711ulaw

  Dial-peer voice voip 2001
  destination-model 2000
  session target ipv4:10.0.0.2
  Codec g711ulaw

  ePhone-dn 1
  number 1000

  ePhone-dn 2
  number 1001
  corlist incoming call2000

  Thanks in advance

  Hey Torrence,

  List HORN to work, you must have corlist and out of dialpeers.

  Now, since ephone-dn 1 (for ext 1000) does not have a list Horn, it can make all the other dial-peers

  Correct configuration will be like this

  Dial-peer cor custom

  name of block-pt

  name license-pt

  Dial-peer cor list block2000

  Members block-pt

  Dial-peer cor list permit2000

  Members permit-pt

  Dial-peer voice 2000 voip
  corlist outgoing permit2000
  destination-model 2000
  session target ipv4:10.0.0.2
  Codec g711ulaw

  Dial-peer voice voip 2001
  destination-model 2000
  session target ipv4:10.0.0.2
  Codec g711ulaw

  ePhone-dn 1
  number 1000

  corlist incoming block2000

  ePhone-dn 2
  number 1001

  with this configuration, when 1000 dials 2000, router will check incoming cor block2000 list with outgoing cor permit2000 from the list. As incoming is not subnet of outgoing call fails.

  When 1000 2001 dials. The dial-peer courses has no cor list. So, no restrictions.

  for 1001, none entering cor list, so outgoing cor list does not apply

  Hope this helps

  Thank you

  Abu-

• FaceTime local number in different countries

  HI, I was wondering if I can FaceTime my friend who is traveling abroad and using the local number she recorded locally. It uses the same number for roaming data roaming and NOT to use the wifi. While I, on the other side of the country (do not travel) and using 3G (data) do I or my friend have to pay for FaceTimeing while it is in another country (wifi) and I use my cellular data?

  As long as your data plan is not limited, your FaceTime call doesn't cost you money. Even if you receive this call via Wi - Fi, you may have to pay to get the Wi - Fi connection, if your WiFi is not free.

  See also: it costs money FaceTime internationally?