Facing problem while installing Windows on TPG style Partitions...

Similar Questions

• I am facing problem while seraching & folders inside my computer files.

  I am facing problem while seraching & folders inside my computer files. I have always marked the option "Show hidden files & folders" before I start looking for, but it's automaticaliy turn unmarked & I can't seem to find the hidden files & folders. I use XP Service Pack 3.

  Some infections of virus and spyware uncheck the option "Show hidden files & folders" to keep you from finding their files.

  Update your antivirus program and run a full scan.

  Download, install and run the Microsoft Windows Malicious Software Removal Tool scans and Malwarebytes' Anti-Malware .

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Facing problem while in place emphasis on the pop-up component interface user

  Hello team,

  Jdev - 12.1.2.0.0

  I am facing problem while emphasizing one of the UI element (af:inputtText) of pop - up to

  Scenario-

  I have a jsff page.

  On the page, I have a button and a pop up

  When you click the button, pop up comes with 10 text entry box. By default, his shows on the first field accent, but I want it to be on the second text box.

  I already have a client component to TRUE for the two input as well as pop-up text

  Please suggest me any hint/help

  Code: -.

  < af:inputText label = "#{ctapmainBundle.Accountno}" id = "pt_it2" "

  partialTriggers = "b11".

  value = "#{pageFlowScope.bannerFlowManager.Criteria.AccountNumber} '"

  autoSubmit = 'true '.

  Validator = "#{backingBeanScope.bannerFlowBean.validateAccountNumber} '"

  Binding = "#{backingBeanScope.bannerFlowBean.AccountNumber} '"

  clientComponent = "true" >

  < af:clientListener type = "keyUp" method = "enterKeyEvent" / >

  < / af:inputText >

  function setFocusOnAccount (event) {}

  Alert ('Hi');

  var component = event.getSource ();

  Alert (' component name ' + component);

  var characterCounter = component.getParent () .findComponent ('pt_it2');

  Alert ('characterCounter with Parent' + characterCounter);

  var characterCounterId = characterCounter.getClientId ();

  Alert ("text entry id ' + characterCounterId");

  characterCounterId.focus ();

  }

  Thank you

  Céline

  Hi guys,.

  I found the solution,

  I changed my customer contact on af:pop - up to earlier that I was calling from button makes part of the same page and he called client listener first and then pop up.

  If my goal is not to set to pop - up field.

  So now I'm able to get the focus on the pop-up field.

  Here's the code.

  function setFocusOnAccount(event) {}

  Alert ('Hi');

  var component = event.getSource ();

  Alert (' component name ' + component);

  var characterCounter = component.getParent () .findComponent ('pt_it2');

  Alert ('characterCounter with Parent' + characterCounter);

  characterCounter.focus ();

  }

  contentDelivery = "lazyUncached".

  popupFetchListener = "#{backingBeanScope.bannerFlowBean.searchPopupClearFields} '"

  popupCanceledListener = "#{backingBeanScope.bannerFlowBean.resetPopUpFields}" > "

   

  Thanks Dario, Ashish and Arun who helped me.

• HP 15 - r014TX: GFT Drive Partition problem when installing Windows 7 on my HP 15 - r014TX

  Hello
  I have a new HP laptop that had windows OS 8.1. OS has been corrupted and now when I try to install Windows 7 on the same I get this error: "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »
  So, I saw a few videos of the solution on youtube and found that I need to convert MBR mode and for that I need to clean the drive and re partition which will result in the loss of data. As I don't have a BONE in my laptop that I can't even get back to the top of my data.
  Some can give me alternatives by which I can back up my data or install windows without losing my data.
  I tried the option "Repair Windows" so while installing windows7, but even that does not work as the OS recovery file is missing.
  Any help would be much appreciated.

  Hello

  Just to make sure, when starting in legacy mode, you'll normally see two optical drive options:

  CDROM

  and

  CDROM (uefi)

  You see two options, and if so, you select the CDROM (uefi)?

  Otherwise, an option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Get his problem after installing windows update on May 18, 2016

  Original title: updated 18/06/2016

  Has anyone else been having sound problems with the new batch of updates? I tried to download the drivers, but that didn't work and now I had to restore my system from the 18th daily. Any ideas on how to identify the update is the cause or what driver I may have missed? My computer is a Dell Latitude E5420, running 64-bit Windows 7 Prof. Any other information needed let me know. Thank you!

  Hello

  According to the description, I understand that you are facing the problem in your computer after Windows installation updated May 18, 2016.

  Yes, you can view the installed update so that you can identify the updates that are installed in May 18, 2016.

  Please follow the steps to see updates history in Windows 7:

  1. Click the Start button.

  2. Then select Control Panel > programs.

  3. And then, under programs and features.

  4. Select view installed updates.

  View update installed please check that the update installed in May 18, 2016 and uninstall the update one & check if the sound is working well and find the culprit, update.

  Please follow the methods described below to check if it helps:

  Method 1: perform a Clean boot and install Windows Update.

  If its a major update, I recommend you put the computer in a clean boot state and install it again in order to minimize interference that could cause this noise problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: uninstall and reinstall the Sound Driver.

  1. Press Windows + X key.
  2. Type devmgmt.msc (to open Device Manager)
  3. Find and select the audio driver.
  4. Right click on the driver.
  5. Uninstall the audio driver.

  Windows automatically installs the generic driver, otherwise I recommend you download & install audio driver on the website of the manufacturer to check if it helps.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Problems after installing Windows Live Essentials 2011

  Hey,.

  First of all, I downloaded windows live essentials 2011 to install the new msn messenger... then before it finished installation it gave me an error I tried to reinstall twice through wle but it wouldn't work so I left it and tried to reopen after a while... It gives an error that says: "Please install windows live programs"... I tried to uninstall it through Control Panel but nothing regarding windows live is in Add/Remove programs... Messenger would not sign... service is temporary, said not available...

  Thanks for the help in advance

  You can find support for the installation/uninstall/upgrade / upgrade to Windows Live Essentials 2011 in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

• Partitioning of the problems when installing Windows 7

  I have a HP Compaq CQ58 supplied with Windows 8. I switched to Ubuntu and I'm doing a clean install of Windows 7. Installation came at a prompt asking "Where do you want to install Windows?" and I have three partitions:

  Disk 0 Partition 1 - 94.0 MB system
  Disk 0 Partition 2-296, 4 GB primary
  Disk 0 Partition 3-1, 6 GB primary

  When you select one of them, I get "Windows cannot be installed to Partiion Dis 0 x." On the 1 (System) partition, the details are:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Windows cannot be installed to this hard disk space. The partition is a partition of EFI (ESP) system.

  On Partition 2 (primary), the details just say:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  And on the Partition (primary) 3, tell the details:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Windows cannot be installed to this hard disk space. Windows must be installed on a partition formatted in NTFS.

  Windows cannot be installed to this hard disk space. The partition is of an unknown type.

  Well, I had nothing in particular requiring a backup (it is a computer of leisure, all of our important data are on other devices), then I hit the "Format" button on all three in turn try to get the installation to run on one of them. If any OS at this point is completely erased. I need to know, now, what to do. I'm not comfortable with my computer knowledge to go and delete partitions without professional opinion. I'm not used to have more than one partition and wouldn't mind consolidating unless HP has good reasons to keep them separate.

  Hello

  There is no reason to keep these partitions and you can remove them using the disk management on the following installation disc.

  Left click a partition for highlight.

  Click the blue link "drive Options (Advanced).

  Select the option 'delete '.

  Repeat this step for each partition listed.

  Once completed, you should see only 1 entry showing that "the unallocated space on disk 0.

  Click on the button 'Next' operation of installation of Windows 7.

  Be aware that Windows 7 will also create a "System" of about 100 MB hidden partition that contains the files and start the recovery environment.

  Kind regards

  DP - K

• [SOLVED] Problem - cannot install Windows XP on C dive - only option is the D drive.

  Hello

  I'm doing a clean install of windows xp pro on a hard disk with unallocated space at the front of the drive and a primary partition containing the data at the end of the training.

  I want to install windows xp pro on a primary partition on the front of the disk on drive C.

  Here's my problem:

  When I was installing windows xp pro, I noticed that when I created a partition in the unallocated space at the front of the car where I wanted to install windows xp pro, that I couldn't C as a drive letter for the installation drive - d only.

  I ran the installation at the end and Yes, windows xp pro did install on drive D - this isn't what I want - I want it on the C drive.

  Can someone tell me how I can solve this installation problem.

  Should I run a partition boot CD and set up a primary partition on the front of the drive before installing windows xp pro?

  Thank you very much.

  I solved this problem by following these steps:

  1. I installed a second hard drive (old sata drive).

  2. I installed windows xp on the second hard drive.

  3. I photographed the windows xp install from the second disc on the first hard drive.

  4. I deleted the second disc.

  5. I've rehearsed with my other computers.

  Everything works fine - just takes a little longer than expected.

• Error while installing windows Xp on my E Aspire 13 ES1-311-C4VK. Error is STOP: 0x0000007E.urgent pls help

  I tried so many times to install windows xp on my Aspire E 13 ES1 boot cd - 311 - C4VK.Xp first, then load something. After that, it shows the error:

  STOP: 0X0000007E (0XC0000005, 0XF73B9D66, 0XF78D9EA0, 0XF78D9BC)

  ACPI.sys - address F73B9D66 base at F73AE000, DateStamp 480252 b 1.

  I need urgent help.

  And another thing, I want that it is not possible to change the sata ACHI to ide mode. Isn't it possible to change?

  Why windows XP?

  It is not longer supported by Microsoft and other SOFTWARE, and it is the best OS to have viruses, rootkits and other infections.

  you will be also problems of drivers/hardware as acpi.sys

  If you need windows XP for some old software, try to use a virtual machine or buy a second hand laptop.

• Problem after installing windows live essentials

  I installed windows live essentials, but continues to come I have a problem with windows live, I tried to uninstall and reinstall windows live essentials, but always says I have a problem.can you help to solve the problem, thanks a lot

  Hello

  ·         What is the full error message?

  Check to see if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

• Error 80246001 while installing Windows updates

  error 80246001
  

  Update error 80246001

  Hi graziellafragiacomo,

  ·         What is the exact error code?

  Check to see if the following is useful.

  Step 1: See the update history for the error failed.

  See the Windows updates are installed

  Step 2: Try to reset the Windows Update components and then try to install the update. Refer to the below article mentioned the same thing.

  How to reset the Windows Update components?

  For more information, you can consult the following link.

  Problems with installing updates

• problem in installing Windows 10

  I am upgrading to Windows 7 to 10 of Windows via the Windows 10 Upgrade Wizard. The download is successful, but installation of Windows 10 is 99% for the last 2 days. Can someone please suggest a solution for this problem

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Problems after installing Windows 10

  Original title: windows 7

  I installed windows 10 and didn't have any other problems.  How to get back to 7

  Option 1: You can try to restore if its less than 30 days of upgrade:

  https://techingiteasy.WordPress.com/2015/03/24/how-to-rollback-to-a-previous-version-of-Windows-from-Windows-10/

  Option 2: If Rollback is not available or does not work, see:

  How to: Reinstall or restore your original Windows installation after having evaluated the 10 Windows