Factory recovery Toshiba does not lack of partition

Hello

Notebook PC no longer starts. When you insert a dvd - w8 to a fabrieksherstel (ex-factory) I get this message.

+ Fabrieksherstel kan niet worden uitgevoerd. Een vereiste stationspartitie Land. +

+ Resumption of the factory does not work. A required partition of a station is missing. +

Can someone help me what to do please?

You said that you have inserted Win 8 DVD to do a cover of the plant.

You use the Microsoft Windows 8 DVD or do you use the Toshiba Recovery DVD 8?

I put t know which model of laptop you have, but on newer models preinstalled with Win 8 some configuration changes are needed in order to boot from the disc.

In the BIOS, you must disable secure boot and have switch to MSC mode

Your comments would be appreciated

Tags: Toshiba

Similar Questions

  • the system recovery media does not support this computer

    I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

    Hello

    You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

    There are a few options available.

    1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

    2 create your own recovery media to use to run the installation - it would be my personal preference.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • For 1000-zx satellite recovery disk does not work

    XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

    Hello

    Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
    However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
    In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

    Good bye

  • Rescue and recovery software will not remove preinstalled Partition

    I recently had a T450s by a great process and tries to get her comfortable environment again.

    My two latest Lenovo laptops had a recovery in the stock installation partition, and I was able to remove simply by running the top software and selecting an option amounting to "delete backup partition" or something allowing me to back up c.

    On this machine, I ran the software and he gave me an option to create a recovery media more. I installed the software, Thinkvantage Rescue and Recovery, and he has an option to delete backups, but does not recognize the partition.

    It's deeply annoying, I do not use it and he eats up to 15 GB. If anyone has a solution for this, please let me know.

    ADDENDUM:

    Moreover, now the software on the partition is not ongoing, saying: it does not find "recovburncd.exe" and try again. Help, please.

    So reinstall RNR has failed, but I realized that I could go into administrative tools and modify the disk partitions.

    I now have this problem solved, thank you for your comments.

  • ENVY 15 3040 nr recovery disc does not

    Hello

    I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

    The system recovery media does not support this computer.

    You are not able to restore the system with the media.

    0110 A9P60UA #ABA - A9P58UA #ABA

    Help, please!

    Hello

    Assuming that it's just a problem with the recovery media, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

  • Portege M200 recovery process does not work

    I want to re format my old M200 of 4 years using the original recovery disks (4).
    The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

    My C drive is NTFS, and the recovery process does not work.
    I'm unable to find any other documents or files on the drives to advise me what to do help.

    I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

    NTFS.

    May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

    How have you tried to recover the laptop?
    Have you tried to boot from the CD?

  • Re: Toshiba does not update drivers

    Qosmio X 300-15 g, after a year in new GPU overheating, laptop come with current NVIDIA driver.
    Their driver was last updated was in 2009 for this model. Their driver is almost 2 years old. I kid you not; Toshiba does not simply update the video drivers.
    They think that the video drivers need to be updated. They think it's good for me to use the old drivers full of bugs. If I do not use this driver, laptop overheating.
    How the hell is that possible?

    How the hell Toshiba does not support their own product (the laptop is about 4500 $, and now unnecessary due to driver problem, well I mean, of course I can browse the internet and use Notepad...).

    Do you use this old Qosmio with Vista or Win7 maybe?
    You are a player and need good graphics performance?

    Qosmio X 300 I had last year and I used for multimedia and games. For me this worked OK and I was satisfied with the performance graphics playing COD4.
    Before I sold it I installed Win7 and didn t notice any problem with him so I m wondering really here report you bugs in the display driver.

    For fun, I created two short films on YouTube. You can check under http://www.youtube.com/user/agramski

  • Recovery CD does not completely load.

    I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

    Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

  • Site Web de Toshiba does not recognize my serial number of the Satellite A215-S7428

    Irregular deadlines. Site Web de Toshiba does not recognize my serial number. Someone at - he met who? I guess the alphabetic characters are uppercase. Serial number is 9 characters long with alpha characters at the two ends of the chain.
    Weird.
    Has anyone had problems to register their laptops?

    Wait a minute my friend. On website of Toshiba, you try to do this? I hope that you do not save the model of portable non-European on European support page.

    Am I mistaken or you're really trying to do? As far as I know, you have a model of cell phone US.

  • My recovery CD does not work and will not install my genuine copy of Windows XP.

    XP Home Edition.

    I bought a computer acer laptop, which came with a pre loaded windows XP Home Edition. As I had to format the laptop for some reason, I used a pirated version of XP.  Now, I want to install the original version. I have the product key. My recovery CD does not work, because I had used the pirated version.  Pls help...

    You need to start using the CD - no existing OS - and install it to clean.

    It will wipe your drive first, back up your data on an external support.

  • Recovery Manager does not recognize a flash drive

    Well, this is my second attempt to create recovery media, initially I thought the drive was defective and returned. I would go to 8.1 but would create recovery first. Recovery creator does not recognize the cross (SanDick Cruzer 16 GB) flash drive the forums and google around and have not really found a solution. Help please? Must I resort to buying discs for this purpose? I don't see any mention of this player being Win 8 compatible.  PC is the new HP Envy 1430. THX...

    natrldsastr wrote:

    I said in my initial inquiry, I can't find any compatible 'Win 8' claim for this device. The packaging claims to be compatible by the bias of Win 7, but no mention of 8. I knew it was a problem and had checked. Regardless, this disc is useless for the recovery of the system. Thanks for your time.

    Hello! Looks like you have a couple of choices for me. Use a PNY flash. Create an image of your operating system with a third-party App or get some DVD high quality. I agree that the drive is useless for the recovery of the system. I've seen your problem before on other forums and other products. I do not have the answer.

    Dokie!

    PS Perhaps SanDisk has a?

  • MY RECOVERY MEDIA DOES NOT DV6-3170EE

    Hello, I have a HP Pavilion dv6 - 3170ee Entertainment Notebook PC Core I7, drive HARD 500, Ram 4

    I had a problem while I was trying to find my laptop. one of the brackets 5 recovery DVD does not work anymore. can someone help me find online recovery support please.

    Thank you.

    I'm looking for recovery media. Use the following URL.

    http://support.HP.com/us-en/document/bph07143

    I highly recommend that you order a usb instead of a disk set support. USB support is, unlike DVDs, very durable.

  • Data Recovery Advisor does not work

    In our environment of RAC DB 12 c Data Recovery Advisor does not work? Why?

    The Data Recovery Advisor is only supported by ORACLE DB Single Instance!

    https://docs.Oracle.com/CD/E60665_01/db121/BRADV/rcmrepai.htm#BRADV246

  • DVD - ROM Toshiba Recovery disk does not start

    Hello

    I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
    When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
    I have already tried:
    1. by pressing the "C" key to start the computer
    2 - press "F12".
    3 - Enter the BIOS Setup and select cd-rom to start first

    But the computer starts up normally and no error message appears

    Can someone help me? I don't know what to do

    Thank you

    Hello Palma

    Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

Maybe you are looking for