Factory reset question

I have reset to factory my AE this morning and he automatically joins the network. The next time I did it, the amber light remains flashing. I have to connect it via Ethernet for the initial Setup? Thank you for your help.

Cheers, Peter

I have reset to factory my AE this morning and he automatically joins the network.

She could not do this if the reset was a success, given that the network settings on the Express would have been totally erased in a successful reset.

Next time that I did, the amber light is still flashing

This indicates that the reset was successful.

I have to connect it via Ethernet for the initial Setup?

Use an Ethernet cable during installation only if you plan to have the Express connected permanently to your router using a wired Ethernet connection.

Use wireless during installation of the Express, if you plan to have the Express connect wireless to your existing wireless network.

In other words, you set up the Express the way it will be used with your network.

Tags: Wireless

Similar Questions

  • T510 factory reset question

    Windows 7 64 bit on my T510 is dead. When you connect, it hangs on the forever login screen. Windows Recovery failed too. It lasted eight hours and reported an error (something like error to restore a file and the disk is full, although my C drive is half empty). After that, all the Windows restore points have disappeared. So I guess I need to factory reset.

    My question is, I made two other partitions on my hard drive using external tools, that store all my data. So when I do the factory reset, these two partitions are replaced? Any suggestions so I can recover the system while keeping all my data? Thank you.

    The resumption of the plant will remove all partitions on the disk. Faced with a similar problem, here is what I do:
    First of all, I have remove all hard drive passwords. Then, I suggest Vibrio hard drive test in BIOS to see if the drive is the root of the problem. Buy a new hard drive, then install the OS on the new drive. The old disk can be mounted in a USB enclosure or an Ultrabay adapter to access the data. I tend to keep the old drive for 3-6 months in case I've missed or forgotten something, so I sell or reuse the old disk, after the failure of it.

  • C20 TC5.0 FACTORY RESET QUESTION

    Need help please.

    I have a C20 of the TC5.0 running software.

    Using the document quick set c20 for factory reset... I turned off the system.  Just press on and hold power and get the flashing of the LED (GRN).

    Problem is that when I press and hold button LED GRN light never comes to the top.  After about 8 to 10 seconds, I have the RED Led.  When I release the button of the normal commenses system starts.  ?????

    All the ideas that I need to get the password reset on the thing.

    E-mail: [email protected] / * /

    VR

    Chet

    The factory reset procedure was changed in software version TC5.1, so anything before that has a different procedure than newer versions.

    As has been mentioned by Jens - factory reset procedure is different on the version of the software you are using, so, in your case, with the TC5.0 software, you will need to use the "old way".

    There are a description of the methods in the jrandby post in the thread c20-factory - default - power button .

    As mentioned in the Troubleshooting Guide (pages 22-25), the physical method of performing a factory reset is one of the last options resort - there are other methods, first of all, you should try.

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

  • PALM TX - Factory Reset question - need help

    I have a PALM TX. The green power button on top seems the PALM TX turns on but not turn off the power. The home on the PALM TX button will literally reset the PALM TX by it turn off and save as a PC. The soft reset by clicking on the reset at the back button works. The hard reset never works it just of upward loads data and time to change initially. I tried a reset which apparently does not apply to the PALM TX zero. I'm doing gift of this device, but I want to make sure that all my information is a first. I think I'll just keep it if I can't find a way to do a factory reset.

    When all else failed, I tried to remove only randomly all the softare or memory on the primary server, but at some point it resets and it won't let me do this etiher. A knowledge of any software I can add to make a factory reset?

    Tara

    Is this your first Palm?  It sounds like from an older older device file system have been sent to this TX.

    A Hard Reset is recommended.  If your power switch is in effect unusable, I have another solution.

    To perform a hard reset: (Palm Knowledgebase article #887)

    By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.

    You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

    If you are unable to do the above, download and install the "Hard Reset" here:

    http://www.palmpowerups.com/downloads.php?cat_id=2

    The program will run immediately reset when it runs.

    WyreNut

  • Re: Satellite T130 - 11H - Factory Reset questions

    Hello

    I had to reset my Satellite T130 - 11 H to factory settings to try to stop the issues with my internet and computer in very slow summer and unresponsive, but now when it starts it states that it is "complete the installation may take several minutes" then restarts on its own starts again, then restart again and again!

    Now it is tell ing, the same message but just hangs and does not go on my counter top?

    Help

    Thank you

    Hello

    I know during a recovery procedure you laptop will restart several times. So, don't interrupt and wait. If it restarts always for a long time, you can restore the settings to factory using recovery media, you did

  • Force10 S60 Factory Reset question

    Hi all

    As the title says, I have a S60 Force10 that I need to restore factory settings, but none to the documentation I found so far has worked.  When I tension, rather than get the menu "Select an option" normal, it messages "submarine 1.3.4" and run the boot sequence instead.  At a time given in the process, it gives me the ability to stop Auto-start sequence, but not the choice if I do.  Call the help file to the moment there does not offer much either...

    I know, it cannot be that hard, so I must be missing something simple.  Someone at - it was otherwise here?  I don't need to keep all the settings, I want to just configure the switch from scratch.

    Thanks in advance,

    -Michael

    After entering the commands

    -Online setenv stconfigignore true

    -Online saveenv

    Allow the system to boot completely, without pressing any key during the boot process. Don't worry not about entering default settings restore. Once it is done booting, what status is the switch then in? It is operational and accepting orders? Or another status?

  • I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

    I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

    Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

    You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

    Use iTunes to restore your device to factory settings - Support Apple iOS

    If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

    copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

  • Questions factory reset

    Hello

    I have a factory to reinstall, but a few problems. I have a X 220 Tablet (4294-CTO) that does not have an optical drive, there is no factory installation disc. There is the partition of the drive Q that exists but which I expect to be able to use. When I use the program to reboot, it does not appear to find the recovery disk information. When I restart the computer and launch the standalone version of recovery it offers the possibility for a factory reset, but then when I confirm it restarts just the computer taking me to the windows resets options that is not an option to do a factory reset.

    Can you please help me figure out how to get a factory reset done?

    Kind regards

    GURT

    If you look in the manual to the user on the computer, there is an explanation on how to create a USB stick recovery and also how to recover your system.

  • Lenovo G50 factory reset - 80 questions

    I have a laptop G50-80, which has been upgraded to Win10 quite earlier. Recently he started having trouble with hardware and software that worked no longer works. I decided to use the reset option factory to return the system to Win8.1.

    Before doing so I downloaded the more critical of my files from the user to a Cloud Computing service and created a recovery image of windows on a SSD connecterd external via USB. I also created a system restore CD.

    Once I felt, it was safe, I pushed the button and started the factory reset. It has worked flawlessly, the system came in Win8.1. However, the files that I had uploaded to the cloud is not fully spread, and I needed to restore the image of Win10 to get back them.

    After several attempts to get the Win10 upgraded to work, I finally got to Win10 boot and restore the image of the SSD system. I found the files and was more securely save for later access. Now, I had to perform a factory reset more to return the system to Win8.1. But operations to do so led to restart the system for the installation of Win8.1. He was not able to start the factory reset.

    Some reading on the internet indicates that if the HD partitions are written in software other than the Lenovo OneKey tools that any attempt to use the partitions of the factory to do a reset would fail with the symptoms that I saw.

    Using the Win10 disk management tool, I see that there are 6 partitions on my hard drive. They are called "Recovery Partition", "EFI System Partition", "OEM Partition", "C:", "D:", and "recovery Partition". I don't see anything on the first 3 or last one of them. It doesn't seem to be a file system to set up, so I don't know if the data has been preserved.

    Is there something I can do to recover the factory software reset so I can restore this system to Win8.1?

    You may need more information to help. I'll be happy to provide all that you think you have need. Let me know.

    Vince

    I found an answer that seems to work for me. I am currently at 12%, restore the factory settings. Check out the instructions here:

    https://forums.Lenovo.com/T5/Lenovo-beacon-stick-300-D-J-and/Windows-8-recovery-partition-not-recogn...

    After the execution of these instructions, the novo button does not. From the Lenovo OneKey app doesn't. I had to reboot to factory settings using the windows restore utilities. Before running these instructions, the third partition of the provided factory restore option was not available. This time it was and the restoration continues.

    If I don't come back and say otherwise, assume the success!

    Vince (13% now)

  • Factory reset wireless router connection problems?

    Hello

    I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

    This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

    I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

    The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

    Any help would be greatly appreciated.

    I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

    I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

  • HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

    Hello

    So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

    If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

    I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

    Thanks in advance.

    Hello

    I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

    Kind regards.

  • Pavilion Notebook LK8JHHPQ: Factory reset

    HP told me that I have to do a reset to factory my laptop HP Pavilion LK8JHHPQ. I've never done before. Could someone provide instructions for such an operation? If I am not mistaken not all applications and programs provided with the system will be restored, is that correct? Only, I have to install programs, that I myself, responsible for example for Word.

    I would like to save all the files that I need before running the factory reset, is that correct?

    Thank you

    Yes to all 3 questions.

    This document from HP should help recovery:

    http://support.HP.com/us-en/document/c04758961

  • How to start the factory reset on the Qosmio F50-125?

    I'm going to get in trouble with resetting factory my laptop. I google and answers most needed to press 0 in starting up, but it does not, the leptop occurs just with commissioning.

    How to really factory reset this model? (I do not have any backup) + I would like to reinstall windows.

    best regards and thanks for the help at the front

    Hello

    I don't know why you're wasting your time Googling autour. Everything is described in s operating manuals. If you download the user s manuals document and check the 66 page, you will find an exact description how do.

    Please check the instructions and try to start the installation of HARD drive recovery.
    By the way: you have created recovery DVD media?

    If you still have questions, feel free to ask.

    Good luck

  • Cannot perform factory reset to Satellite L650

    Hi team, support

    Hope you will be well :)
    I have some problems and hope that you will help me solve them. Here is the description of my problem:
    I have a Toshiba Satellite L650 - 17R laptop computer I want to reset to the factory settings. I used the following instructions to do that (http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm), but when I'm in pressing the F8 key when starting laptop it appears a list of choices on the display that does not contain 'Repair your computer' or "??" or something like that. The first entry in this list is 'Safe Mode', second is 'Safe Mode with Networking' and so on. Also, I tried the other method described in many places in the internet, which is to press 0 and the whole power button when you turn on the laptop. In this case again, he starts to do things as described in the instructions (example here http://www.youtube.com/watch?v=I5dEOm1EJBw): it beeps, then when I let go of the 0 key, it prints "starting Windows" and shows the Windows logo, after that it goes to market as always and no other dialog boxes appear.

    Issues related to the:
    Is there another way to do the factory reset?
    I have doubts that the "Toshiba HDD recovery" tool of my laptop is corrupted, so is it possible to download this tool on the internet, on dvd disc and install from there? If so, then can you please give me a link of this tool for my model?

    Best regards
    Mihran grabbed.

    Hello Mihran and welcome in the Toshiba forum

    Let's see what's not there.
    First some general info. Each new Toshiba notebook is preinstalled with original recovery image. This image is also saved on the HARD disk on a separate partition. With the factory settings repair my computer option will appear in the advanced start-up (F8 at startup) and HARD drive recovery option can be made as described in Toshiba document you posted in your first assignment. If nothing is changed, this option will be there and you will be able to do the installation of HARD drive recovery again ad again.
    > when I'm in pressing the F8 key when starting laptop it appears a list of choices on the display that does not contain "repair your computer".
    This occurs if you have installed the version of the OS using the Microsoft installation disc. After having this option to fix my computer will disappear, and you will not be able to start the installation of HARD drive recovery.
    > Is there another way to do the factory reset?
    Yes. You must use the disk for the installation of the OS restore DVD. After that it all will be the same. Repair my computer option will be available again and you won't be havce factory again.

    If you have any other questions you are welcome.

  • Error ID MOTOBLUR after factory reset

    Hello

    My phone has for the past month, get really laggy so I thought that I would like to format the SD card and do a factory reset.

    When the phone has rebooted, I had to go through the usual configuration of Motoblur.

    He asked for my ID Motoblur (email address) and password so I went to the same email address, I registered here and the same password but the phone came back with the message that the ID did not exist. I tried to retype everything to make sure that I had not bad entered, but it still doesn't work.

    Frustrated I tried to create a new ID using the same email address and password and told me that I couldn't create it because the ID already existed...

    What is going on???

    I jumped the Motoblur configuration for now but would be grateful for the help to resolve it, then I can access to the service, so I paid. I noticed that some other owners also have questions of Motoblur.

    Don't tell me that Motorola has canned the Motoblur service...?

    Could you send me a private message with the IMEI of your phone and the e-mail address used to MotoBlur?

Maybe you are looking for